References
- Council Directive 80/1269/EEC of 16 December 1980 on the approximation of the laws of the Member States relating to the engine power of motor vehicles. Official Journal of the European Communities, L 375.
- Čedík, J., Pexa, M., Peterka, B., Holúbek, M., Mader, D., Pražan, R., 2018. Effect of biobutanol-sunflower oil-diesel fuel blends on combustion characteristics of compression ignition engine. Acta Technologica Agriculturae 21(4), 130–135. https://doi.org/10.2478/ATA-2018-0024
- Daud, S., Hamidi, M.A., Mamat, R., 2022. A review of fuel additives‘ effects and predictions on internal combustion engine performance and emissions. AIMS Energy 10(1), 1–22. https://doi.org/10.3934/ENERGY.2022001
- Ergin, S., Durmaz, M., Kalender, S.S., 2019. An experimental investigation on the effects of fuel additive on the exhaust emissions of a ferry. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment 233(4), 1000–1006. https://doi.org/10.1177/1475090218806709
- Huo, Y., Jing, X., Yin, Z., Wu, M., 2022. Study on the effect of fuel additive on PFI gasoline engine performance and emissions. E3S Web of Conferences 360, 01036. https://doi.org/10.1051/E3SCONF/202236001036
- Imdadul, H.K., Masjuki, H.H., Kalam, M.A., Zulkifli, N.W.M., Rashed, M.M., Rashedul, H.K., Monirul, I.M., Mosarof, M.H., 2015. A comprehensive review on the assessment of fuel additive effects on combustion behavior in CI engine fuelled with diesel biodiesel blends. RSC Advances 5(83), 67541–67567. https://doi.org/10.1039/C5RA09563H
- Janoško, I., Krasňanský, M., 2025. Testing of selected fuel additive in diesel engine. Acta Technologica Agriculturae 28(1), 50–56. https://doi.org/10.2478/ATA-2025-0007
- Kristyadi, T., Permana, D.I., Sirodz, M.P.N., Saefudin, E., Farkas, I., 2022. Performance and emission of diesel engine fuelled by commercial bio-diesel fuels in Indonesia. Acta Technologica Agriculturae 25(4), 221–228. https://doi.org/10.2478/ATA-2022-0032
- Latiff, Z.A., Aziz, A.A., Perang, M.R.M., Abdullah, N., 2013. The effect of fuel additives on gasoline heating value and spark ignition engine performance: Case study. Applied Mechanics and Materials 388, 301–306. https://doi.org/10.4028/www.scientific.net/amm.388.301
- MAHA, 2024a. MET 6.3. VP 135213. MAHA. Available at: https://www.maha.de/en/products/emission-measurement-technology/emission-tester/met-63~p2172
- MAHA, 2024b. MSR 500/2 CAR 4WD (Add. Brake). VP 230041. MAHA. Available at: https://www.maha.de/en/products/performancemeasurementtechnology/dynamometers/msr-5002-pkw-allrad~p2018
- Markov, V., Kamaltdinov, V., Zherdev, A., Furman, V., Sa, B., Neverov, V., 2019. Study on the possibility of improving the environmental performance of diesel engine using carbon nanotubes as a petroleum diesel fuel additive. Energies 12(22), 4345. https://doi.org/10.3390/EN12224345
- Naife, T.M., 2022. Improvement of diesel fuel engine performance by nanoparticles additives. Journal of Engineering 28(4), 77–90. https://doi.org/10.31026/J.ENG.2022.04.06
- Pach, M., 2024. Internal diesel injector deposits. Characterization, formation mechanisms, and replication. PhD thesis, KTH Royal Institute of Technology, Stockholm, Sweden. https://kth.diva-portal.org/smash/get/diva2:1911413/FULLTEXT01.pdf
- Pielecha, I., Stępień, Z., Szwajca, F., Kinal, G., 2023. Effectiveness of butanol and deposit control additive in fuel to reduce deposits of gasoline direct injection engine injectors. Energies 16(1), 77. https://doi.org/10.3390/EN16010077
- Rievaj, V., Gaňa, J., Synák, F., 2019. Comparison of emissions depending on the type of vehicle engine. Logistics, Supply Chain, Sustainability and Global Challenges 10(1), 45–54. https://doi.org/10.2478/jlst-2019-0004
- Rosa, J.S., Smaniotto, M.M., Telli, G.D., 2024. Impacts on combustion from the metal oxide nanoparticles use as an additive in biodiesel: literature review. SAE Technical Paper 2023-36-0119. SAE International. https://doi.org/10.4271/2023-36-0119
- Synák, F., Frančák, M., Skrúcaný, T., Rievaj, V., 2019. Assessing the impact of using fuels made from vegetable oil on selected operational vehicle characteristics. Transport Technic and Technology 15(1), 16–21. https://doi.org/10.2478/TTT-2019-0004
- Woldetensy, H.Z., Zeleke, D.S., Tibba, G.S., 2025. Study of the impact on emissions and engine performance of diesel fuel additives made from cotton and castor blended seed oils. Heliyon 11(1), e41659. https://doi.org/10.1016/J.HELIYON.2025.E41659
- Xu, H., Wang, C., Ma, X., Sarangi, A.K., Weall, A., Krueger-Venus, J., 2015. Fuel injector deposits in direct-injection spark-ignition engines. Progress in Energy and Combustion Science 50, 63–80. https://doi.org/10.1016/J.PECS.2015.02.002
- Yin, Z., Jing, X., Zhang, L., Zhang, E., Wu, M., 2022. Study on the effects of nitro-based fuel additive on diesel engine performance and emissions. E3S Web of Conferences 360, 01035. https://doi.org/10.1051/E3SCONF/202236001035
- Zerda, T.W., Yuan, X., Moore, S.M., 2001. Effects of fuel additives on the microstructure of combustion engine deposits. Carbon 39(10), 1589–1597. https://doi.org/10.1016/S0008-6223(00)00287-6