References
- ABDUL-MUNAIM, A. M. 2013. Which plow is more suitable for tillage farming in Iraq?. In AMA, Agricultural Mechanization in Asia, Africa, and Latin America, vol. 44, no. 4, p. 10. Available at: https://www.researchgate.net/publication/288974680_Which_Plow_is_more_Suitable_for_Tillage_Farming_in_Iraq
- ABOOD, A. M. – MOSES, S. C. – LAWRENCE, A. K. A. 2015. Evaluation of tractor noise level during tillage operation with a disc plough. In European Academic Research, vol. 3, no. 5, pp. 5410–5421. Available at: https://euacademic.org/UploadArticle/1880.pdf
- ABRAHÁM, R. – ZUBČÁK, T. – MAJDAN, R. – KOLLÁROVÁ, K. – MATEJKOVÁ, E. – MASAROVIČOVÁ, S. – DRLIČKA, R. 2022. Drawbar performance of tractor tyres with steel spikes at 100%-wheel slip. In Acta Technologica Agriculturae, vol. 25, no. 2, pp. 97–104. DOI: https://doi.org/10.2478/ata-2022-0016
- AL-AANI, F. S. 2024. Technical and economical parameters influencing the performance and feasibility of Armatrac tractor to perform primary tillage and planting operation in silty clay loam soil. In Iraqi Journal of Agricultural Sciences, vol. 55, no. 3, pp. 1239–1250. DOI: https://doi.org/10.36103/ea480m26
- ALMALIKI, S. A. – HIMOUD, M. S. – MUHSIN, S. J. 2021. Mathematical model for evaluating slippage of tractor under various field conditions. In Basrah Journal of Agricultural Sciences, vol. 34, no. 1, pp. 49–59. DOI: https://doi.org/10.37077/25200860.2021.34.1.05
- AMER, K. Z. – JEBUR, H. A. – SWAIN, K. H. 2020. Study evaluation and analysis of the properties of some performance standards for agricultural tractor and Sorghum bicolor (L.) Moench yield. In International Journal of Agricultural and Statistical Sciences, vol. 16, suppl. 1, pp. 1811–1814. Available at: https://connectjournals.com/03899.2020.16.1811
- ASAE D497.5:2006. Agricultural machinery management data. In ASAE Standars, pp. 390–398. American Society of Agricultural and Biological Engineers, St. Joseph, Michigan, USA.
- AWAD-ALLAH, M. A. – MAHGOUB, H. M. – ABO-ELNOR, M. E. – SHAHIN, M. A. 2009. Experimental investigation of the effect of vibration during tillage process of multi shank plough blade. In Aerospace Sciences & Aviation Technology (ASAT-13), vol. 13, pp. 1–16. DOI: https://doi.org/10.21608/asat.2009.23710
- AWWAD, A. A. – HILAL, Y. Y. – RAJAB, R. H. 2023. The effect of diesel fuel improvers on the vibrations, noise and fuel consumption of the agricultural tractor engine during the tillage process. In IOP Conference Series: Earth and Environmental Science, vol. 1213, article no. 012098. DOI: https://doi.org/10.1088/1755-1315/1213/1/012098
- BARUT, Z. B. – ÖZDEMIR, S. 2024. A research on metal and metallurgical properties of chisel plough shanks. In BIO Web of Conferences, vol. 85, article no. 01007. DOI: https://doi.org/10.1051/bioconf/20248501007
- CHAN, H. S. 1998. Criteria for a recommended standard. Occupational noise exposure. Revised criteria 1998. Available at: stacks.cdc.gov/view/cdc/6376/cdc_6376_DS1
- CHENARBON, H. A. 2022. Effect of moldboard plow share age and tillage depth on slippage and fuel consumption of Tractor (MF399) in Varamin region. In Idesia, vol. 40, no. 2, pp. 113–122. Available at: https://www.scielo.cl/pdf/idesia/v40n2/0718-3429-idesia-40-02-113.pdf
- CHERUBIN, M. R. – KARLEN, D. L. – FRANCO, A. L. C. – TORMENA, C. A. – CERRI, C. E. P. – DAVIES, C. A. – CERRI, C. C. 2016. Soil physical quality response to sugarcane expansion in Brazil. In Geoderma, vol. 267, pp. 156–168. DOI: https://doi.org/10.1016/j.geoderma.2016.01.004
- DE SOUZA, G. S. – DE SOUZA, Z. M. – COOPER, M. – TORMENA, C. A. 2014. Controlled traffic and soil physical quality of an Oxisol under sugarcane cultivation. In Scientia Agricola, vol. 72, no. 3, pp. 270–277. DOI: https://doi.org/10.1590/0103-9016-2014-0078
- DZHABBOROV, N. – DOBRINOV, A. – SERGEEV, A. 2021. Vibration parameters and indicators of a dynamic tillage tool. In IOP Conference Series: Earth and Environmental Science, vol. 937, article no. 032048. DOI: https://doi.org/10.1088/1755-1315/937/3/032048
- EGELA, M. – HAMED, A. 2017. Tractor noise levels impact on operator safety. In Journal of Soil Sciences and Agricultural Engineering, vol. 8, no. 8, pp. 355–362. DOI: https://doi.org/10.21608/jssae.2017.37532
- EL-SHEIKHA, A. M. – AL-RAJHI, M. A. – EL-SHABASY, T. M. 2021. Effect of coating chisel plow shares with some materials on draft force requirement. In Journal of Soil Sciences and Agricultural Engineering, vol. 12, no. 9, pp. 611–614. DOI: https://doi.org/10.21608/jssae.2021.201484
- GOUDARZI, B. – ASOODAR, M. A. – KAZEMI, N. 2015. Effect of blade vibration on mulch tillage performance under silt clay loam soil. In Journal of Agricultural Machinery, vol. 5, no. 2, pp. 357–367. DOI: https://doi.org/10.22067/jam.v5i2.28510
- HAMID, A. A. A. 2024. Calculating the total costs of the tractor and the chisel plow under variable speeds and depth of tillage. In Diyala Agricultural Sciences Journal, vol. 16, no. 1, pp. 26–40. DOI: https://doi.org/10.52951/dasj.24160103
- HRN ISO 5131: 2018. Tractors for agriculture and forestry – Measurement of noise at the operator’s position – Survey method. Zagreb, Croatia : Croatian Standards Institute.
- KARPARVARFARD, S. H. – RAHMANIAN-KOUSHKAKI, H. 2015. Development of a fuel consumption equation: Test case for a tractor chisel-ploughing in a clay loam soil. In Biosystems Engineering, vol. 130, pp. 23–33. DOI: https://doi.org/10.1016/j.biosystemseng.2014.11.015
- KOSULNIKOV, R. A. – KONOVALOV, P. V. – GAPICH, D. S. – KARSAKOV, A. A. 2020. Tillage implement with vibrating working body. In IOP Conference Series: Earth and Environmental Science, vol. 577, article no. 012014. DOI: https://doi.org/10.1088/1755-1315/577/1/012014
- LALREMRUATA – DEWANGAN, K. N. – PATEL, T. 2019. Noise exposure to tractor drivers in field operations. In International Journal of Vehicle Performance, vol. 5, no. 4, pp. 430–442. DOI: https://doi.org/10.1504/IJVP.2019.104085
- MAHMOOD, H. F. – SUBHI, Q. A. – HUSSEIN, E. K. 2011. Comparison of vibrations, tillage depths and soil properties for moldboard and disk plows at three tillage speeds. In Asian Journal of Agricultural Research, vol. 5, no. 1, pp. 90–97. DOI: https://doi.org/10.3923/ajar.2011.90.97
- MAMKAGH, A. M. 2019. Effect of soil moisture, tillage speed, depth, ballast weight, and used implement on wheel slippage of the tractor: A review. In Asian Journal of Advances in Agricultural Research, vol. 9, no. 1, pp. 1–7. DOI: https://doi.org/10.9734/AJAAR/2019/46706
- MAREY, S. – ABOUKARIMA, A. – ALMAJHADI, Y. 2020. Predicting the performance parameters of chisel plow using neural network model. In Engenharia Agrícola, vol. 40, no. 6, pp. 719–731. DOI: https://doi.org/10.1590/1809-4430-Eng.Agric.v40n6p719-731/2020PREDICTING
- NAIR, S. – SINGH, R. 2021. A review of quantification of noise in engines. In Magazine of Hydraulics, Pneumatics, Tribology, Ecology, Sensorics, Mechatronics, no. 3, pp. 51–56. Available at: https://hidraulica.fluidas.ro/2021/nr3/51-56.pdf
- NASSIR, A. – MUHSIN, S. J. – NDAWI, D. R. 2022. The technical evaluation of three different types of tillage combined machines and compared them with individual tillage machines. In Basrah Journal of Agricultural Sciences, vol. 35, no. 2, pp. 341–361. DOI: https://doi.org/10.37077/25200860.2022.35.2.26
- OKOKO, P. – AKPANKPUK, S. N. 2023. Effects of tillage depth and tractor speed on implement speed for three tillage implements on a clay loam soil. In Asian Journal of Advances in Agricultural Research, vol. 22, no. 4, pp. 1–7. DOI: https://doi.org/10.9734/AJAAR/2023/v22i4444
- RANJBARIAN, S. – ASKARI, M. – JANNATKHAH, J. 2017. Performance of tractor and tillage implements in clay soil. In Journal of the Saudi Society of Agricultural Sciences, vol. 16, no. 2, pp. 154–162. DOI: https://doi.org/10.1016/j.jssas.2015.05.003
- RAO, G. – CHAUDHARY, H. 2018. A review on effect of vibration in tillage application. In IOP Conference Series: Materials Science and Engineering, vol. 377, article no. 012030. DOI: https://doi.org/10.1088/1757-899X/377/1/012030
- SALEH, A. W. – ABDULLAH, A. A. – TAHIR, H. T. 2023. Analysis of the stress affecting the cutting knives locally manufactured in the moldboard plough with the measurement of some of the indicators studied. In Kirkuk University Journal For Agricultural Sciences, vol. 14, no. 2, pp. 271–283. DOI: https://doi.org/10.58928/ku23.14225
- SCHLOSSER, J. F. – DOS SANTOS, P. M. – HERZOG, D. – DA ROSA, L. S. – OTTONELLI, J. 2019. Influence of working depth and soil type on drawbar performance of a chisel plow. In Journal of Agricultural Science, vol. 11, no. 16, pp. 206–212. DOI: https://doi.org/10.5539/jas.v11n16p206
- SINGH, J. – CHATHA, S. S. – SIDHU, B. S. 2018. Influence of tillage depth and plough speed on performance of primary tillage tools. In Asian Journal of Engineering and Applied Technology, vol. 7, no. S2, pp. 138–142. DOI: https://doi.org/10.51983/ajeat-2018.7.2.900
- SYROMYATNIKOV, Y. – VOINASH, S. – TROYANOVSKAYA, I. – ZAGIDULLIN, R. – TIKHONOV, E. – OREKHOVSKAYA, A. 2024. Chisel tillage under spring barley in the forest-steppe. In Acta Technologica Agriculturae, vol. 27, no. 1, pp. 30–34. DOI: https://doi.org/10.2478/ata-2024-0005
- TAHA, H. T. – HILAL, Y. Y. – RAJAB, R. H. 2022. Effects of enhancer diesel fuel and vibrating wings subsoiler plow on the performance of an agricultural tractor. In International Journal of Applied Sciences and Technology, vol. 4, no. 3, pp. 71–80. DOI: https://doi.org/10.47832/2717-8234.12.7
- TAHA, S. Y. – TAHA, F. J. – NEKOLAYEVECH, Z. A. 2016. Estimating economical costs for operating agricultural machines and equipment during plowing operations. In Iraqi Journal of Agricultural Sciences, vol. 47, no. 1, pp. 385–390. DOI: https://doi.org/10.36103/ijas.v47i1.642
- TAHIR, H. T. – JEEJO, N. H. – KARIM, T. H. 2018. A comparative study of conventional and modified tine types of subsoiler and their effect on some performance characteristics. In Tarım Makinaları Bilimi Dergisi (Journal of Agricultural Machinery Science), vol. 14, no. 1, pp. 47–55. Available at: https://dergipark.org.tr/tr/download/article-file/621921