References
- ANTILLE, D. L. – PEETS, S. – GALAMBOŠOVÁ, J. – BOTTA, G. F. – RATAJ, V. – MACÁK, M. – TULLBERG, J. N. – CHAMEN, W. C. T. – WHITE, D. R. – MISIEWICZ, P. A. – HARGREAVES, P. R. – BIENVENIDO, J. F. – GODWIN, R. J. 2019. Review: Soil compaction and controlled traffic farming in arable and grass cropping systems. In Agronomy Research, vol. 17, no. 3, pp. 653–682. DOI: https://doi.org/10.15159/AR.19.133
- BELYAEV, A. N. – SHATSKY, V. P. – TRISHINA, T. V. – VYSOTSKAYA, I. A. 2022. Analysis of the actual curvilinear motion trajectory of a wheeled vehicle. In Vestnik of Voronezh State Agrarian University, vol. 15, pp. 63–70. (In Russian)
- BELYAEV, V. I. – SOKOLOVA, L. V. – KUZNECOV, V. N. – MATSYURA, A. V. 2017. Effect of sowing aggregates on sowing quality of spring soft wheat (the case of moderate dry-forest steppe, Altay region). In Ukrainian Journal of Ecology, vol. 7, no. 3, pp. 258–263.
- BOCHTIS, D. D. – VOUGIOUKAS, S. G. 2008. Minimising the non-working distance travelled by machines operating in a headland field pattern. In Biosystems Engineering, vol. 101, no. 1, pp. 1–12. DOI: https://doi.org/10.1016/j.biosystemseng.2008.06.008
- BORYGA, M. 2023. Trajectory planning for tractor turning using the trigonometric transition curve. In Agricultural Engineering, vol. 27, no. 1, pp. 203–212. DOI: https://doi.org/10.2478/agriceng-2023-0015
- BULGAKOV, V. – IVANOVS, S. – ADAMCHUK, V.– NADYKTO, V. 2016. Theoretical investigation of turning ability of machine and tractor aggregate on basis of ploughing and intertilling wheeled tractor. In Engineering for Rural Development. Jelgava, Latvia, pp. 1077–1084.
- BULGAKOV, V. – IVANOVS, S. – NADYKTO, V. – KUVACHOV, V. – MASALABOV, V. 2018. Research on the turning ability of a two-machine aggregate. In INMATEH – Agricultural Engineering, vol. 54, no. 1, pp. 139–146.
- CARIOU, C. – LENAIN, R. – BERDUCAT, M. – THUILOT, B. 2010. Autonomous maneuvers of a farm vehicle with a trailed implement in headland. In ICINCO 2010 – Proceedings of the 7th International Conference on Informatics in Control, Automation and Robotics. Funchal, Madeira, Portugal, pp. 109–114. https://doi.org/10.5220/0002875501090114
- DOSPEKHOV, B. A. 1985. Field Experiment Methodology (with the basics of statistical processing of research results). Moscow : Agropromizdat, 350 pp. (In Russian)
- IVANOVS, S. – BULGAKOV, V. – NADYKTO, V. – KUVACHOV, V. 2018. Theoretical investigation of turning ability of two-machine sowing aggregate. In Engineering for Rural Development, vol. 17, pp. 314–322. DOI: https://doi.org/10.22616/ERDev2018.17.N330
- KARKEE, M. – STEWARD, B. L. 2010. Study of the open and closed loop characteristics of a tractor and a single axle towed implement system. In Journal of Terramechanics, vol. 47, no. 6, pp. 379–393. DOI: https://doi.org/10.1016/j.jterra.2010.05.005
- KHAN, A. – NOREEN, I. – HABIB, Z. 2017. On complete coverage path planning algorithms for non-holonomic mobile robots: survey and challenges. In Journal of Information Science and Engineering, vol. 33, no. 1, pp. 101–121. DOI: https://doi.org/10.6688/JISE.2017.33.1.7
- KONSTANTINOV, M. M. – TERPILOVSKY, E. Y. 2006. Improving methods for constructing wide-width units. In News Orenburg State Agrarian University, vol. 3, pp. 71–73. (In Russian)
- KRASOVSKIKH, B. C. – BEREZHNOV, N. N. – ZCHERBININ, V. V. – KRASOVSKIKH, E. V. 2012. Seeding combine as a means of increasing the efficiency of sowing grain crops. In Bulletin of Altai State Agrarian University, vol. 7, pp. 74–79. (In Russian)
- LI, B. – WANG, K. – SHAO, Z. 2015. Time-optimal trajectory planning for tractor-trailer vehicles via simultaneous dynamic optimization. In IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Hamburg, Germany, pp. 3844–3849. DOI: https://doi.org/10.1109/IROS.2015.7353917
- OKSANEN, T. 2007. Path Planning Algorithms for Agricultural Field Machines. Series A: Research Reports No. 31. Espoo : Helsinki University of Technology, 110 pp.
- OKSANEN, T. – VISALA, A. 2004. Optimal Control of Tractor-Trailer System in Headlands. In ASAE International Conference of Automation Technology for Off-Road Equipment. In ASAE International Conference of Automation Technology for Off-road Equipment. Kyoto : Japan, pp. 255–263.
- SABELHAUS, D. – RÖBEN, F. – HELLIGEN, L. P. M. – LAMMERS, P. S. 2013. Using continuous-curvature paths to generate feasible headland turn manoeuvres. In Biosystems Engineerinng, vol. 116, no. 4, pp. 399–409. DOI: https://doi.org/10.1016/j.biosystemseng.2013.08.012
- SZAKÁCS, T. 2010. Developing stability control theories for agricultural transport systems. In Acta Polytechnica Hungarica, vol. 7, no. 2, pp. 25–37.
- TALARCZYK, W. – SZULC, T. – SZCZEPANIAK, J. – LOWINSKI, L. 2016. Functional verification of unit for strip tillage, fertilization and corn sowing. In Journal Research and Applications in Agricultural Engineering, vol. 61, no. 2, pp. 110–113.
- TRENDAFILOV, K. 2021. Theoretical determination and analysis of the length of the non-working move and of the width of the headland when performing a fishtail turn with a curvilinear reverse move by a machine-tractor unit with a mounted machine in an irregularly shaped field. In IOP Conference Series: Materals Science and Engineering, vol. 1031, article no. 012006. DOI: https://doi.org/10.1088/1757-899X/1031/1/012006
- TU, X. – TANG, L. 2019. Headland turning optimization for agricultural vehicles and those with towed implements. In Journal of Agriculture and Food Ressearch, vol. 1, article no. 100009. DOI: https://doi.org/10.1016/j.jafr.2019.100009
- VOUGIOUKAS, S. – BLACKMORE, S. – NIELSEN, J. – FOUNTAS, S. 2006. A two-stage optimal motion planner for autonomous agricultural vehicles. In Precision Agriculture, vol. 7, pp. 361–377. DOI: https://doi.org/10.1007/s11119-006-9022-9
- YATSKUL, A. – LEMIERE, J.-P. – DELION, C. 2014. On an automated headland turn of wide width air seeders. In RHEA-2014 (Robotics and Associated High-Technologies and Equipment for Agriculture and Forestry). Madrid, Spain, pp. 2–9.