References
- ABBASPOUR-GILANDEH, Y. – SEDGHI, R. 2015. Predicting soil fragmentation during tillage operation using fuzzy logic approach. Journal of Terramechanics. vol. 57, pp. 61–69. DOI: https://doi.org/10.1016/j.jterra.2014.12.002
- ABRAHÁM, R. – ZUBČÁK, T. – MAJDAN, R. – KOLLÁROVÁ, K. – MATEJKOVÁ, E. – MASAROVIČOVÁ, S. – DRLIČKA, R. 2022. Drawbar performance of tractor tyres with steel spikes at 100%-wheel slip. In Acta Technologica Agriculturae, vol. 25, no. 2, pp. 97–104. DOI: https://doi.org/10.2478/ata-2022-0016
- AL-HAMED, S. – WAHBY, M. – ABOUKARIMA, A. – AHMED, K. 2014. Development of a computer program using visual basic for predicting performance parameters of tillage implements. In MISR Journal of Agricultural Engineering, vol. 31, no. 3, pp. 1157–1190. DOI: https:/doi.org/10.21608/mjae.2014.99147
- AL-JANOBI, A. – AL-HAMED, S. – ABOUKARIMA, A. – ALMAJHADI, Y. 2020. Modelling of draft and energy requirements of a mouldboard plough using artificial neural networks based on two novel variables. In Engenharia Agrícola, vol. 40, no. 3, pp. 363–373. DOI: https://doi.org/10.1590/1809-4430-Eng.Agric.v40n3p363-373/2020
- ALMALIKI, S. A. – HIMOUD, M. S. – MUHSIN, S. J. 2021. Mathematical model for evaluating slippage of tractor under various field conditions. In Basrah Journal of Agricultural Sciences, vol. 34, no. 1, pp. 49–59. DOI: https://doi.org/10.37077/25200860.2021.34.1.05
- ALMALIKI, S. A. 2018. Simulation of draft force for three types of plow using response surface method under various field conditions. In Iraqi Journal of Agricultural Sciences, vol. 49, no. 6, pp. 1123–1131. DOI: https://doi.org/10.36103/ijas.v49i6.151
- ALWAN, A. A. 2019. A field study of soil pulverisation energy by using different mouldboards types under various operating condition. In Basrah Journal of Agricultural Sciences, vol. 32, no. 2, pp. 373–388. DOI: https://doi.org/10.37077/25200860.2019.284
- BLACK, C. A. 1965. Methods of Soil Analysis. Part 1 Physical and Mineralogical Properties Including Statistics of Measurement and Sampling. 9.1. Madison, Wisconsin : American Society of Agronomy Inc., 770 pp. ISBN 9780891182030. DOI: https://doi.org/10.2134/agronmonogr9.1
- CVIKLOVIČ, V. – SRNÁNEK, R. – HRUBÝ, D. – HARNIČÁROVÁ, M. 2021. The control reversing algorithm for autonomous vehicles with PSD-controlled trailers. In Acta Technologica Agriculturae, vol. 24, no. 4, pp. 187–194. DOI: https://doi.org/10.2478/ata-2021-0031
- DAHHAM, G. A. – AL-IRHAYIM, M. N. – AL-MISTAWI, K. E. – KHESSRO, M. K. 2023. Performance evaluation of artificial neural network modelling to a ploughing unit in various soil conditions. In Acta Technologica Agriculture, vol. 26, no. 4, pp. 194–200. DOI: https://doi.org/10.2478/ata-2023-0026
- LENTH, R. V. 2009. Response-surface methods in R, using rsm. In Journal of Statistical Software, vol. 32, no. 7, pp.1–17. DOI: https://www.jstatsoft.org/article/view/v032i07
- MUHSIN, S. J. 2017. Performance study of mouldboard plow with two types of disc harrows and their effect on some soil properties under different operating conditions. In Basrah Journal of Agricultural Sciences, vol. 30, no. 2, pp. 1–15. DOI: https://doi.org/10.37077/25200860.2017.37
- NASSIR, A. J. 2018. Effect of mouldboard plow types on soil physical properties under different soil moisture content and tractor speed. In Basrah Journal of Agricultural Sciences, vol. 31, no. 1, pp. 48–58. DOI: https://doi.org/10.37077/25200860.2018.75
- NASSIR, A. J. – MUHSIN, S. J. – NDAWI, D. R. 2022. The technical evaluation of three different types of tillage combined machines and compared them with individual tillage machines. In Basrah Journal of Agricultural Sciences, vol. 35, no. 2, pp. 341–361. DOI: https://doi.org/10.37077/25200860.2022.35.2.26
- NATSIS, A. – PAPADAKIS, G. – PITSILIS, J. 1999. The influence of soil type, soil water and share sharpness of a mouldboard plough on energy consumption, rate of work and tillage quality. In Journal of Agricultural Engineering Research, vol. 72, no. 2, pp. 171–176. DOI: https://doi.org/10.1006/jaer.1998.0360
- ODUMA, O. – EHIOMOGUE, P. – NTUNDE, D. I. 2023. Model development and optimisation of the disk plough efficiency on loamy-sand soil in South-East Nigeria. In Research in Agricultural Engineering, vol. 69, no. 1, pp. 9–17. DOI: https://doi.org/10.17221/72/2021-RAE
- ODUMA, O. – EHIOMOGUE, P. – OKEKE, C. G. – ORJI, N. F. – UGWU, E. C. – UMUNNA, M. F. – NWOSU-OBIEOGU, K. 2022. Modelling and optimization of energy requirements of disc plough operation on loamy-sand soil in South-East Nigeria using response surface methodology. In Scientific African, vol. 17, article no. e01325. DOI: https://doi.org/10.1016/j.sciaf.2022.e01325
- ODUMA, O. 2019. Development of empirical regression equations for predicting the performances of disk plough and harrow in clay-loam soil. In Agricultural Engineering International: CIGR Journal, vol. 21, no. 3, pp. 18–25.
- UMANI, K. C. – FAKAYODE, O. A. – ITUEN, E. U. U. – OKOKON, F. B. 2019. Development and testing of an automated contact plate unit for a cassava grater. In Computers and Electronics in Agriculture, vol. 157, pp. 530–540. DOI: https://doi.org/10.1016/j.compag.2019.01.028
- USABORISUT, P. – SUKCHAROENVIPHARAT, W. – CHOEDKIATPHON, S. 2020. Tilling tests of rotary tiller and power harrow after subsoiling. In Journal of the Saudi Society of Agricultural Sciences, vol. 19, no. 6, pp. 391–400. DOI: https://doi.org/10.1016/j.jssas.2020.05.002