References
- AKYUZ, O. – KAYA, N. – CAN, M. – DEMIC, S. 2019. Mechanical properties of quartz-added PP based composites produced by high speed thermo-kinetic mixer. In Acta Physica Polonica A, vol. 135, no. 5, pp. 1045–1049. DOI: https://doi.org/10.12693/APhysPolA.135.1045
- ASTM C 1259-01: 2001. Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration. Standard Documents, Philadelphia, USA.
- HILARY, L. N. – SULTANA, S. – ISLAM, Z. – SARKER, K. U. – ABEDIN, J. – HAQUE, M. M. 2021. Recycling of waste poly(vinyl chloride) fill materials to produce new polymer composites with propylene glycol plasticizer and waste sawdust of Albizia lebbeck wood. In Current Research in Green and Sustainable Chemistry, vol. 4., article no. 100221. DOI: https://doi.org/10.1016/j.crgsc.2021.100221
- KAZEMI, M. – FINI, E. H. 2022. State of the art in the application of functionalized waste polymers in the built environment. In Resources, Conservation and Recycling, vol. 177, article no. 105967. DOI: https://doi.org/10.1016/j.resconrec.2021.105967
- LI, H. Y. – TAN, Y. Q. – ZHANG, L. – ZHANG, Y. X. – SONG, Y. H. – YE, Y. – XIA, M. S. 2012. Bio-filler from waste shellfish shell: Preparation, characterization, and its effect on the mechanical properties on polypropylene composites. In Journal of Hazardous Materials, vol. 217–218, pp. 256–262. DOI: https://doi.org/10.1016/j.jhazmat.2012.03.028
- LI, J. 2009. The research on the interfacial compatibility of polypropylene composite filled with surface treated carbon fiber. In Applied Surface Science, vol. 255, no. 20, pp. 8682–8684. DOI: https://doi.org/10.1016/j.apsusc.2009.06.053
- LIMANI, H. – MANSSOURI, I. – CHERKAOUI, K. – KHALDOUN, A. 2020. Study of the suitability of unfired clay bricks with polymeric HDPE & PET wastes additives as a construction material. In Journal of Building Engineering, vol. 27, article no. 100956. DOI: https://doi.org/10.1016/j.jobe.2019.100956
- MIRANDA, L. F. – PEREIRA, N. C. – FALDINI, S. B. – MASSON, T. J. – de ANDRADE e SILVA, L. G. – SILVEIRA, L. H. 2009. Effect of ionizing radiation on polypropylene composites reinforced with coconut fibers. In 2009 International Nuclear Atlantic Conference – INAC 2009. Rio de Janeiro: ABEN, pp. 1–9. ISBN 978-85-99141-03-8.
- PFAENDNER, R. 2022. Restabilization – 30 years of research for quality improvement of recycled plastics review. In Polymer Degradation and Stability, vol. 203, article no. 110082. DOI: https://doi.org/10.1016/j.polymdegradstab.2022.110082
- RAJAK, D. K. – PAGAR, D. D. – KUMAR, R. – PRUNCU, C. 2019. Recent progress of reinforcement materials: a comprehensive overview of composite materials. In Journal of Materials Research and Technology, vol. 8, no. 6, pp. 6354–6374. DOI: https://doi.org/10.1016/j.jmrt.2019.09.068
- ROSATO, D. V. – ROSATO, D. V. – ROSATO, M. V. 2004. Plastic Product Material and Process Selection handbook. Amsterdam : Elsevier Science, 618 pp. ISBN 978-1-85617-431-2. DOI: https://doi.org/10.1016/B978-1-85617-431-2.X5000-2
- ŠOTNAR, M. – VITÁZEK, I. – MAREČEK, J. – BURG, P. – KRČÁLOVÁ, E. – DARNADYOVÁ, K. – MAŠÁN, V. 2021. Comparison of ash content in vineyard pruning residues from Moravian region. In Acta Technologica Agriculturae, vol. 24, no. 2, pp. 79–83. DOI: https://doi.org/10.2478/ata-2021-0013
- VYAZOVKIN, S. – CHRISSAFIS, K. – DI LORENZO, M. L. – KOGA, N. – PIJOLAT, M. – RODUIT, B. – SBIRRAZZUOLI, N. – SUNOL, J. J. 2014. ICTAC Kinetics Committee recommendations for collecting experimental thermal analysis data for kinetic computations. In Thermochimica Acta, vol. 590, pp. 1–23. DOI: https://doi.org/10.1016/j.tca.2014.05.036