References
- ABRAHÁM, R. – MAJDAN, R. – DRLIČKA, R. 2019. Special tractor driving wheels with two modification of spikes inclination angle. In Agronomy Research, vol. 17, pp. 333–342.
- ABRAHÁM, R. – MAJDAN, R. – KOLLÁROVÁ, K. – TKÁČ, Z. – OLEJÁR, M. – MATEJKOVÁ, E. – KUBÍK, Ľ. 2021. Frequency spectra analysis of drawbar pulls generated by special driving wheels improving tractive performance. In Sensors, vol. 21, article no. 2903.
- ABRAHÁM, R. – VARGA, F. – MAJDAN, R. – MOJŽIŠ, M. 2012. Design of improvement of adhesive properties of tyres on snow, ice and soil. In Acta Technologica Agriculturae, vol. 15, no. 1, pp. 1–4.
- BATTIATO, A. – DISEREN, E. 2013. Influence of tyre inflation pressure and wheel load on the traction performance of a 65 kW MFWD tractor on a cohesive soil. In Journal of Agricultural Science, vol. 5, no. 8, pp. 197–215.
- BULKO, R. – GAGO, F. 2017. Deformation parameters of soils determined by the cone penetration test. In MATEC Web of Conferences, 26th R-S-P Seminar on Theoretical Foundation of Civil Engineering (RSP), vol. 117, no. 00025, pp. 1–8.
- FORSTER, M. – UGARTE, C. – LAMANDÉ, M. – FAUCON, M. P. 2020. Relationships between root traits and soil physical properties after field traffic from the perspective of soil compaction mitigation. In Agronomy, vol. 10, article no. 1697.
- FREITAG, D. R. 1965. Wheels on Soft Soils: An Analysis of Existing Data. Vicksburg, Mississippi, USA : Army MRC.
- GASPARETTO, E. – FEBO, P. – PESSINA, D. – RIZZATO, E. 1992. The rolling resistance of narrow steel wheels in Italian paddy fields. In Journal of Agricultural Engineering Research, vol. 52, pp. 91–100.
- GE, J. – WANG, X. – KITO, K. 2016. Comparing tractive performance of steel and rubber single grouser shoe under different soil moisture contents. In International Journal of Agricultural & Biological Engineering, vol. 9, no. 2, pp. 11–20.
- GEE-CLOUGH, D. – McALLISTER, R. M. – EVERNDEN, D. W. 1977. Tractive performance of tractor drive tyres. In Journal of Agricultural Engineering Research, vol. 22, no. 4, pp. 385–395.
- HELEXA, M. 2014. Monitoring the impact of tyre inflation pressure on tensile properties of forest tractor. In Research in Agricultural Engineering, vol. 60, no. 4, pp. 127–133.
- HELEXA, M. – KOVÁČ, J. – KRILEK, J. – MELICHERČÍK, J. – KUVIK, T. 2022. Comparison of achieved rolling resistance values of two selected tires on a solid surface. In Applied Sciences, vol. 12, article no. 2251.
- HENDRIADI, A. – SALOKHE, V. M. 2002. Improvement of a power tiller cage wheel for use in swampy peat soils. In Journal of Terramechanics, vol. 39, no. 2, pp. 55–70.
- HERMAWAN, W. – YAMAZAKI, M. – OIDA, A. 1998. Theoretical analysis of soil reaction on a lug of the movable lug cage wheel. In Journal of Terramechanics, vol. 37, no. 2, pp. 65–86.
- HUJO, Ľ. – JABLONICKÝ, J. – MARKOVIČ, J. – TULÍK, J. – SIMIKIĆ, M. – ZASTEMPOWSKI, M. – JANOUŠKOVÁ, R. 2021. Design of laboratory test equipment for automotive oil filters to evaluate the technical life of engine oil. In Applied Sciences, vol. 11, article no. 483.
- IRANI, R. A. – BAUER, R. J. – WARKENTIN, A. 2011. A dynamic terramechanic model for small lightweight vehicles with rigid wheels and grousers operating in sandy soil. In Journal of Terramechanics, vol. 48, no. 2, pp. 307–318.
- KOSIBA, J. – TKÁČ, Z. – HUJO, Ľ. – BUREŠ, Ľ. 2011. Operating modes of hydraulic circuit of tractor Zetor Forterra 114 41. In Acta Technologica Agriculturae, vol. 14, no. 2, pp. 46–49.
- KUČERA, M. – HELEXA, M. – MOLENDA, M. 2016. Selected tire characteristics and their relation to its radial stiffness. In MM Science Journal, vol. 9, no. 6, pp. 1524–1530.
- MAJDAN, R. – ABRAHÁM, R. – TKÁČ, Z. – DRLIČKA, R. – MATEJKOVÁ, E. – KOLLÁROVÁ, K. – MAREČEK, J. 2021. Static lateral stability of tractor with rear wheel ballast weights: comparison of ISO 16231-2 (2015) with experimental data regarding tyre deformation. In Applied Sciences, vol. 11, article no. 381.
- MAJDAN, R. – ABRAHÁM, R. – TKÁČ, Z. – MOJŽIŠ, M. 2018. Drawbar parameters of tractor with prototypes of driving wheels and standard tyres. In Acta Technologica Agriculturae, vol. 21, no. 2, pp. 63–68.
- MALÝ, V. – KUČERA M. 2014. Determination of mechanical properties of soil under laboratory conditions. In Research in Agricultural Engineering, vol. 60, pp. S66–S69.
- MALÝ, V. – TÓTH, F. – MAREČEK, J. – KRČÁLOVÁ, E. 2015. Laboratory test of the soil compaction. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 63, no. 1, pp. 77–85.
- MOLARI, G. – BELLENTANI, L. – GUARNIERI, A. – WALKER, M. – SEDONI, E. 2020. Performance of an agricultural tractor fitted with rubber tracks. In Biosystems Engineering, vol. 111, no. 1, pp. 57–63.
- RASOOL, S. – RAHEMAN, H. 2018. Improving the tractive performance of walking tractors using rubber tracks. In Biosystems Engineering, vol. 167, pp. 51–62.
- SALOKHE, V. M. – MANZOOR, S. – GEE-CLOUGH, D. 1989. The measurement of forces on a cage wheel lug when operating in wet clay soil. In Soil and Tillage Research, vol. 14, no. 4, pp. 327–340.
- SCHREIBER, M. – KUTZBACH, H. D. 2008. Influence of soil and tire parameters on traction. In Research in Agricultural Engineering, vol. 54, no. 2, pp. 43–49.
- SEMETKO, J. – JANOŠKO, I. – PERNIS, P. 2002. Determination of driving force of tractor and trailer wheels. In Acta Technologica Agriculturae, vol. 5, no. 1, pp. 1–4.
- SEMETKO, J. – JANOŠKO, I. – PERNIS, P. 2004. Determination of power of multidrive vehicles. In Acta Technologica Agriculturae, vol. 7, no. 1, pp. 20–23.
- ŠMERDA, T. – ČUPERA, J. 2010. Tire inflation and its influence on drawbar characteristics and performance – energetic indicators of a tractor set. In Journal of Terramechanics, vol. 47, no. 6, pp. 395–400.
- STN ISO 789-9. 1993. Power Test for Drawbar. Bratislava, Slovakia : Slovak Office of Standards, Metrology and Testing.
- TKÁČ, Z. – ČORŇÁK, Š. – CVIKLOVIČ, V. – KOSIBA, J. – GLOS, J. – JABLONICKÝ, J. – BERNÁT, R. 2017. Research of biodegradable fluid impacts on operation of tractor hydraulic system. In Acta Technologica Agriculturae, vol. 20, no. 2, 42–45.
- TRIRATANASIRICHAI, K. T. – OIDA, A. – HONDA, M. 1990. The performance of cage wheels for small power tillers in agricultural soil. In Journal of Terramechanics, vol. 27, no. 3, pp. 193–205.
- VARANI, M. – MATTETTI, M. – MARALDI, M. – MOLARI, G. 2020. Mechanical devices for mass distribution adjustment: Are they really convenient? In Agronomy, vol. 10, article no. 1820.
- WANG, X. L. – YAMAZAKI, M. – TANAKA, T. 1995. Characteristics of soil reactions of an open lugged wheel under paddy soil conditions. In Journal of Terramechanics, vol. 32, pp. 115–125.
- WATYOTHA, C. – GEE-CLOUGH, D. – SALOKHE, V. M. 2001. Effect of circumferential angle, lug spacing and slip on lug wheel forces. In Journal of Terramechanics, vol. 38, pp. 1–14.
- WATYOTHA, C. – SALOKHE, V. M. 2001. PM – Power and machinery: tractive performance of cage wheels with opposing circumferential lugs. In Journal of Agricultural Engineering Research, vol. 79, no. 4, pp. 398–398.
- YANG, Y. – YI, S. – SHUGEN, M. 2014. Drawbar pull of a wheel with an actively actuated lug on sandy terrain. In Journal of Terramechanics, vol. 56, pp. 17–24.