References
- ALMEIDA, E. – PEREIRA, D. – FIGUEIREDO, O. 1989. The degradation of zinc coatings in salty atmospheres. In Progress in Organic Coatings, vol. 17, no. 2, pp. 175–189.
- ALMEIDA, E. – SANTOS, D. – URUCHURTU, J. 1999. Corrosion performance of waterborne coatings for structural steel. In Progress in Organic Coatings, vol. 37, no. 3–4, pp. 131–140.
- CABANELAS, I. – COLLAZO, A. – IZQUIERDO, M. – NÓVOA, X. R. – PÉREZ, C. 2007. Influence of galvanised surface state on the duplex systems behaviour. In Corrosion Science, vol. 49, no. 4, pp. 1816–1832.
- ČSN EN ISO 1461. 2010. Hot dip galvanized coatings on fabricated iron and steel articles – Specifications and test methods. Prague : Czech Standards Institute.
- ČSN EN ISO 2431. 2020. Paints and varnishes – Determination of flow time by use of flow cups. Prague : Czech Standards Institute.
- ČSN EN ISO 4287. 1999. Geometrical product specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters. Prague : Czech Standards Institute.
- ČSN EN ISO 4624. 2016. Paints and varnishes – Pull-off test for adhesion. Prague : Czech Standards Institute.
- ČSN EN ISO 9227. 2017. Corrosion tests in artificial atmospheres – Salt spray tests. Prague : Czech Standards Institute.
- DUNHAM, K. J. 2002. Preparing hot-dip galvanized steel surfaces for painting or powder coating: a primer. In Metal Finishing, vol. 100, no. 9, pp. 20–25.
- GUAN, H. – BUCHHEIT, R. G. 2004. Corrosion protection of aluminium alloy 2024-T3 by vanadate conversion coatings. In Corrosion, vol. 60, no. 3, pp. 284–296.
- GUZANOVÁ, A. – BREZINOVÁ, J. – DRAGANOVSKÁ, D. – JAŠ, F. 2014. A study of the effect of surface pre-treatment on the adhesion of coatings. In Journal of Adhesion Science and Technology, vol. 28, no. 17, pp. 1754–1771.
- HANSEL, D. 1999. Abrasive blasting systems. In Metal Finishing, vol. 97, no. 5, pp. 29–55.
- HYLÁK, K. – KUDLÁČEK, J. 2017. Light blasting (sweeping) of hotdip galvanising surface for coatings application. In Proceedings of Conference Student Creative Activity. Prague : Czech Technical University in Prague, Faculty of Mechanical Engineering, pp. 1–4.
- HYLÁK, K. – KUDLÁČEK, J. – KREIBICH, V. – SVOBODA, J. 2017. Mechanical pre-treatment of zinc surfaces and comparison coatings for duplex system. In Proceedings 10th Conference Pigments and Binders. Pardubice : University of Pardubice, Faculty of Chemical Technology, pp. 144–148.
- KUKLÍK, V. – KUDLÁČEK, J. 2014. Hot dip galvanizing. Prague : Czech and Slovak Galvanizers Association, 208 pp. ISBN 978-80-905298-2-3.
- LILKO, J. – KOTUS, M. – DOBIÁŠ, P. – PONJICAN, O. 2019. Hardfacing electrodes resistance in laboratory conditions. In Proceeding of 7th International Conference on Trends in Agricultural Engineering. Prague : Czech University of Life Sciences Prague, pp. 337–340.
- LOZRT, J. – VOTAVA, J. – ŠMAK, R. 2021. Duplex anti-corrosion protection of steel using a combination of hot-dip galvanising and water-soluble paints. In Acta Technologica Agriculturae, vol. 24, no. 3, pp. 129–135.
- MALONE, J. F. 1992. Painting hot dip galvanized steel. In Materials Performance, vol. 31, no. 5, pp. 39–42.
- POLÁKOVÁ, N. – DOSTÁL, P. – VOTAVA, J. 2018. TIG welding of stainless steel and titanium with additive AG 104. In MendelNet: Proceedings of International PhD Students Conference. Brno : Mendel University in Brno, Faculty of AgriSciences, pp. 468–471.
- SATHYANARAYANA, M. N. – YASEEN, M. 1995. Role of promoters in improving adhesions of organic coatings to a substrate. In Progress in Organic Coatings, vol. 23, no. 2–4, pp. 275–313.
- SERÉ, P. R. – SCHVEZOV, C. – DI SARLI, A. R. – DEYÁ, C. 2018. Triplex systems: accelerated and outdoor tests. In Materials and Corrosion, vol. 70, no. 3, pp. 470–480.
- SERÉ, P. R. – ARMAS, A. R. – ELSNER, C. I. – DI SARLI, A. R. 1996. The surface condition effect on adhesion and corrosion resistance of carbon steel/chlorinated rubber/artificial sea water systems. In Corrosion science, vol. 38, no. 6, pp. 853–866.
- ŠMAK, R. – VOTAVA, J. – POLCAR, A. 2020. The cooling media influence on selected mechanical properties of steel. In Acta Technologica Agriculturae, vol. 23, no. 4, pp. 183–189.
- ŤAVODOVÁ, M. – KALINCOVÁ, D. – KOTUS, M. – PAVLÍK, L. 2018. The possibility of increasing the wearing resistance of mulcher tools. In Acta Technologica Agriculturae, vol. 21, no. 2, pp. 87–93.
- VERNER, P. – CHRÁST, V. – KRAHULA, K. – ZMRZLÝ, M. – ČERŇANSKÝ, M. – HOUDKOVÁ, J. – VORLÍČEK, V. 2006. Chromate alternatives in zinc galvanized steel surface treatment. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 54, no. 1, pp. 135–144.
- VOTAVA, J. – KUMBÁR, V. – POLCAR, A. – FAJMAN, M. 2020. Change of mechanical properties of zinc coatings after heat treatment. In Acta Technologica Agriculturae, vol. 23, no. 1, pp. 7–11.
- VOTAVA, J. – JUKL, M. – POLCAR, A. – KUMBÁR, V. – DOSTÁL, P. 2018. Anti-corrosion systems in vehicles for the transportation and application of fertilizers. In Kovové Materiály – Metallic Materials, vol. 56, no. 2, pp. 131–136.
- VOTAVA, J. – KUMBÁR, V. 2017. Usage of waterborne acrylate anticorrosion systems for ecological environment. In Manufacturing technology, vol. 17, no. 1, pp. 103–110.