Performance Features of Tooth Gearing in Gear Hydraulic Machines

Kuleshkov, Yuri V.; Rudenko, Timofey V.; Krasota, Mikhailo V.; Bošanský, Miroslav; Tóth, František

doi:10.2478/ata-2021-0014

Abstract

The paper presented determines that the rotation velocities of gears and radii connecting the axes of rotation of the gears with the point of their teeth gearing are not equal with each other. It is explained by the relative slip of involute gear profiles during their rolling. This phenomenon will become a prerequisite for further development of creation of mathematical models in the context of theory of gear hydraulic machines. The models can explain a number of specific phenomena in the operation of gear hydraulic machines, such as pressure and input pulsations, dynamics of hydraulic oil in the cut-off plane, combined torque pulsations in gear hydraulic motors and others.

References

ARTOBOLEVSKY, I. I. 1988. Theory of Mechanisms and Machines. Moscow: Nauka Publ., 640 pp. ISBN 978–5020138100. (In Russian: Teoriya mehanizmov i mashin).
Search in Google Scholar Back to article
CASOLI, P. – VACCA, A. – BERTA, G. L. 2008. Optimization of relevant design parameters of external gear pumps. In Proceedings of the 7th JFPS International Symposium on Fluid Power. Toyama, Japan, Sept. 15–18, 2008. ISBN 4-931070-07-X.10.5739/isfp.2008.277
Search in Google Scholar Back to article
GAMEZ-MONTERO, P. J. – CASTILLA, R. – CODINA, E. 2018. Methodology based on best practice rules to design a newborn trochoidal gear pump. In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 232, no. 6, pp. 1057–1068.
Search in Google Scholar Back to article
HUANG, K. J. – CHEN, CH. 2008. Kinematic displacement optimization of external helical gear pumps. In Chung Hua Journal of Science and Engineering, vol. 6, no. 2, pp. 23–28.
Search in Google Scholar Back to article
IVANOVIC, L. – DEVEDZIC, G. – CUKOVIC, S. – MIRIC, N. 2012. Modeling of the meshing of trochoidal profiles with clearances. In Journal of Mechanical Design, vol. 134, no. 4, pp. 041003-1–041003-9.
Search in Google Scholar Back to article
KUČERA, M. – ALEŠ, Z. 2017. Morphology analysis of friction particles generated in tractor transmission oils. In Acta Technologica Agriculturae, vol. 20, no. 3, pp. 57–62.
Search in Google Scholar Back to article
KULESHKOV, Yu. V. – CHERNOVOL, M. I. – RUDENKO, T. V. – GUTSUL, V. I. – OSIN, R. A. 2010. Investigation of the behavior of mathematical model of the specific displacement of a gear pump of NSH type from the gearing parameters. In Agricultural Engineering, Industry Engineering, Automation. Collection of scientific works of Kirovohrad National Technical University 2010. Kirovohrad: Kirovohrad National Technical University, pp. 278–290. ISSN 2409–9392.
Search in Google Scholar Back to article
KULESHKOV, Yu. V. – CHERNOVOL, M. I. – BEZ, O. V. – TITOV, Yu. A. 2009. Gear Pumps with Asymmetric Gearing Line. Theory, Design and Calculation. Monography. Kirovohrad: KOD, 243 pp. ISBN 978-966-1508-19-3.
Search in Google Scholar Back to article
STRYCZEK, J. – BEDNARCZYK, S. – CODINA, E. – GAMEZ-MONTERO, P. J. – IVANOVIC, L. – MATEJIC, M. 2019. Gears or rotors – three approaches to design of working units of hydraulic machines. In IOP Conference Series: Materials Science and Engineering, vol. 959, pp. 1–13. ISSN 1757-8981.
Search in Google Scholar Back to article
TKÁČ, Z. – ČORŇÁK, Š. – CVIKLOVIČ, V. – KOSIBA, J. – GLOS, J. – JABLONICKÝ, J. – BERNÁT, R. 2017. Research of biodegradable fluid impacts on operation of tractor hydraulic system. In Acta Technologica Agriculturae, vol. 20, no. 2, pp. 42–45.
Search in Google Scholar Back to article
TULÍK, J. – HUJO, Ľ. – KOSIBA, J. – JABLONICKÝ J. – JÁNOŠOVÁ, M. 2017. Evaluation of new biodegradable fluid on the basis of accelerated durability test, FTIR and ICP spectroscopy. In Research in Agricultural Engineering, vol. 63, no. 1, pp. 1–9.
Search in Google Scholar Back to article
VACCA, A. – GUIDETTI, M. 2011. Modelling and experimental validation of external spur gear machines for fluid power applications. In Simulation Modelling Practice and Theory, vol. 19, no. 9, pp. 2007–2031.
Search in Google Scholar Back to article
WANG, S. – SAKURAI, H.– KASAREKAR, A. 2011. The optimal design in external gear pump and motors. In IEEE/ASME Transactions on Mechatronics, vol. 16, no. 6, pp. 945–952.
Search in Google Scholar Back to article
ZHOU, H. – DU, R. – XIE, A. – YANG, H. 2017. Investigations of the micro surface shape for the gear shaft/journal – bearing interface in water hydraulic internal gear pumps. In Advances in Mechanical Engineering, vol. 9, no. 11.
Search in Google Scholar Back to article

Performance Features of Tooth Gearing in Gear Hydraulic Machines

Abstract

Paradigm

My account