References
- AMINI, K. S. – DAYAGHI, S. M. – YAZDANIAN, M. – SEIYED, B. T. – GHARAVI, F. 2019. The effect of tempering temperature on microstructure and the mechanical properties of forged steel containing chrome, manganese and molybdenum. In Mechanics, vol. 24, no. 6, pp. 112–118.
- ÇAKIR, M. – ÖZSOY, A. – BRAGA, B. M. – LIU, N. – PENG, Y. – ZHAO, X. – REN, R. – ZHANG, H. 2011. Investigation of the correlation between thermal properties and hardenability of Jominy bars quenched with air–water mixture for AISI 1050 steel: A model describing TRIP and TWIP effects. In Journal of Materials Research and Technology, vol. 32, no. 5, pp. 3099–3105.
- BRITO, P. – RAMOS, P. A. – RESENDE, L. P. – DE FARIA, D. A. – RIBAS, O. K. – LIIMATAINEN, T. – KÖMI, J. – ZHANG, H. 2019. Experimental investigation of cooling behavior and residual stresses for quenching with vegetable oils at different bath temperatures: A model describing TRIP and TWIP effects. In Journal of Cleaner Production, vol. 216, no. 20, pp. 230–23810.1016/j.jclepro.2019.01.194
- ČSN EN ISO 6508. 2015. Metalic materilals – Rockwell hardness test. Praha: Český normalizační institut.
- ČSN EN ISO 7438. 2005. Metallic materials – Bend test. Praha: Český normalizační institut.
- ČSN EN ISO 148-1. 2017. Metallic materials – Charpy pendulum impact test. Praha: Český normalizační institut.
- ČSN EN ISO 6507. 2018. Metallic materials – Vickers hardness test. Praha: Český normalizační institut
- FERNANDES, P. K. – PRABHU, N. – BRAGA, B. M. – LIU, N. – PENG, Y. – ZHAO, X. –REN, R – ZHANG, H. 2007. Effect of section size and agitation on heat transfer during quenching of AISI 1040 steel: A model describing TRIP and TWIP effects. In Journal of Materials Processing Technology, vol. 183, no. 1, pp. 1–5.
- GALINDO-NAVA, E. I. – RIVERA-DÍAZ-DEL-CASTILLO, P. E. J. 2017. Understanding martensite and twin formation in austenitic steels: A model describing TRIP and TWIP effects. In Acta Materialia, vol. 128, no. 15, pp. 120–134.
- GOMES, D. F. – TAVARES, R. P. – BRAGA, B. M. – LIU, N. – PENG, Y. – ZHAO, X. –REN, R. – ZHANG, H. 2019. Mathematical model for the temperature profiles of steel pipes quenched by water cooling rings: A model describing TRIP and TWIP effects. In Journal of Materials Research and Technology, vol. 8, no. 1, pp. 1197–1202.
- HAIKO, O. – KAIJALAINEN, A. – PALLASPURO, S. – HANNULA, J. – PORTER, D. – LIIMATAINEN, T. – KÖMI, J. – ZHANG, H. 2019. The effect of tempering on the microstructure and mechanical properties of a novel 0.4C press-hardening steel: A model describing TRIP and TWIP effects. In Applied Sciences, vol. 9, no. 20, pp. 1–5.
- NAPOLI, G. – FABRIZI, G. – RUFINI, R. – MENGARONI, S. – DI SCHINO, A. 2018. Effect of quenching and tempering process on a medium C steel with low chromium and molybdenum addition for forged components. In Acta Metallurgica Slovaca, vol. 24, no. 6, pp.112–118.
- PAULIČEK, T. – KOTUS, M. – DAŇKO, M – ŽÚBOR, P. 2013. Resistance of hard-facing deposit created by laser surfacing technology. In Advanced Materials Research, vol. 801, special iss., pp. 117–122.
- PRATHVIRAJ, M. P. – AUGUSTINE, S. – NARAYAN, P. 2020. Reprocessed waste sunflower cooking oil as quenchant for heat treatment. In Journal of Cleaner Production, vol. 269, article no. 122276.
- SUN, H. – WANG, Y. – WANG, Z. – LIU, N. – PENG, Y. – ZHAO, X. – REN, R. – ZHANG, H. 2020. Twinned substructure in lath martensite of water quenched Fe-0.2 %C and Fe-0.8 %C steels. In Journal of Materials Science and Technology, vol. 49, no. 6, pp. 126–132.
- ŤAVODOVÁ, M. – KALINCOVÁ, D. – KOTUS, M. – PAVLÍK, Ľ. 2018. The possibility of increasing the wearing resistance of mulcher tools. In Acta Technologica Agriculturae, vol. 21, no. 2, pp.87–9310.2478/ata-2018-0016
- VOTAVA, J. – KUMBÁR, V. – POLCAR, A. 2016. Optimisation of heat treatment for steel stressed by abrasive erosive degradation. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 64, no. 4, pp. 1267–1277.
- VOTAVA, J. – KUMBÁR, V. 2014. Application of hard metal weld deposit in the area of mixing organic materials. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 62, no. 5, pp. 1161–1169.
- VOTAVA, J. – KUMBÁR, V. – POLCAR, A. – FAJMAN, M. 2020 Change of mechanical properties of zinc coatings after heat treatment. In Acta Technologica Agriculturae, vol. 23, no. 1, pp. 7–11.