References
- ABBASPOUR-GILANDEH, Y. − HASANKHANI-GHAVAM, F. − SHAHGOLI, G. – SHRABIAN, V. R. − ABBASPOUR-GILANDEH, M. 2018. Investigation of the effect of soil moisture content, contact surface material and soil texture on soil friction and soil adhesion coefficients. In Acta Technologica Agriculturae, vol. 21, no. 2, pp. 44−50.
- ARAYA, K. − KAWANISHI, K. 1985. Soil failure by introducing air under pressure. In Transactions of the ASAE, vol. 27, no. 5, pp. 1292–1298.
- BELOUSOV, S. V. − TRUBILIN, E. I. 2013. The development of a reversible plough design for heavy soil treatment. In Science of Kuban, no. 1, pp. 31–37. (In Russian: Razrabotka konstruktsii lemeshnogo plugadly a obrabotkity azholikh pochv)
- BULGAKOV, V. − PASCUZZI, S.−ADAMCHUK, V. − IVANOVS, S. – PYLYPAKA, S. 2019. A theoretical study of the limit path of the movement of a layer of soil along the plough mouldboard. In Soil & Tillage Research, vol. 195, pp. 1−11.
- GODWIN, R. J. 2007. A review of the effect of implement geometry on soil failure and implement forces. In Soil & Tillage Research, vol. 97, no. 2, pp. 331–340.
- KIRYUKHIN, V. G. − CHIRKOV, G. N. − MILTSEV, A. I. 1974. Test results of plow with plastic moldboards. In Tractors and Agricultural Machines, vol. 12, pp. 19–20. (In Russian: Rezultaty i spytaniy pluzhnykh korpusov s plastmassovymi otvalami)
- LOVEYKIN, V. − DYACHENKO, L. 2012. Methods of experimental investigation into parameters of vibroploughs with hydraulic vibrators. In Vestnik KHNADU, vol. 57, pp. 161–165. (In Ukrainian: Metodika eksperementalnogo doslidzhennia parametria vibropluga z gidravlichnimi vibratorami)
- LUKASHOK, M. A. − KORNEV, D. V. 2009. Method of friction decrease on plow’s bottom. In Almanac of Modern Research and Education, vol. 25, no.6, pp. 113–115. (In Russian: Metodsnizheniya treniya, voznika y ushegona korpusr pluga)10.1038/modpathol.2008.214
- NADYKTO, V. – KOTOV, O. 2015. UA 97828, G 01 N/00. Method for Determining Soil Density. Ukraine.
- NIYAMAPA, T. − SALOKHE, V.M. 2000. Force and pressure distribution under vibratory tillage tool. In Journal of Terramechanics, vol. 37, no. 3, pp. 139–150.
- NKAKINI, S. O. – AKOR, A. J. 2012. Modeling tractive force requirements of wheel tractors for disc ploughing in sandy loam soil. In International Journal of Engineering and Technology, vol. 2, no. 10, pp. 1707−1716.
- OWEN, R. R. – CYCLER, J. E. – TRIBBLE, R. T. 1959. Patent no. 2,913,060. Moldboard Plow with Plastic Resin Covering.
- PANOV, A. 2015. Statistical evaluation of quality of rotary tiller performance. In VESTNIK of Federal State Educational Institution of Higher Professional Education “Moscow State Agroengineering University named after V.P. Goryachkin”, vol. 66, no. 2, pp. 14–27.
- PAVLYUK, A. S. – SOTNIKOV, D. V. 2014. Decreasing methods of agricultural machines draft resistance. In Polzunov Vestnik, vol. 1, no. 4, pp. 7–13 (In Russian: Metody snizheniyaty a govogosoprotivleniy a pchvo obrabatyvayuchikh mashin)
- POLÁKOVÁ, N. – DOSTÁL, P. 2019. Titanium and stainless steel MIG LSC welding. In Acta Technologica Agriculturae, vol. 22, no. 2, pp. 56–59.
- ROMANUK, N. N. – AGEYCHIK, V. A. – NUKESHEV, S. O. – KONDRATENYA, V. N. 2016. Original construction of mounted vibrating plow. In Actual Problems of Formation of Personnel Potential for the Innovation Development of AIC. Minsk: BSATU, pp. 353–357. Available at http://rep.bsatu.by/handle/doc/1090
- SHMULEVICH, I. – ASAF, Z. − RUBINSTEIN, D. 2007. Interaction between soil and a wide cutting blade using the discrete element method. In Soil & Tillage Research, vol. 97, no. 1, pp. 37–50.
- UTKIN, L. A. 1986. Electro-hydraulic effect and its application in industry. Leningrad: Mashinostroenie, 253 pp. (In Russian: Elektrogidravlicheskiieffekt I ego primenenie v promishlennosti).