References
- FLIZIKOWSKI, J. – SADKIEWICZ, J. – TOMPOROWSKI, A. 2015. Functional characteristics of a six-roller mill for grainy or particle materials used in chemical and food industries. In Przemysl Chemiczny, vol. 94, no. 1, pp. 69–75.
- KARWOWSKA, M, – MIKOLAJCZAK, J. – DOLATOWSKI, Z. – BOROWSKI, S. 2013. The effect of varying distances from the wind turbine on meat quality of growing finishing pigs. In Annals of Animal Science, vol. 15, no. 4, pp. 1043–1054.
- KARWOWSKA, M. – MIKOLAJCZAK, J. – BOROWSKI, S. – DOLATOWSKI, Z. – MARC-PIENKOWSKA, J. – BUDZYNSKI, W. 2014. Effect of noise generated by the wind turbine on the quality of goose muscles and abdominal fat. In Annals of Animal Science, vol. 14, no. 2, pp. 441–451.
- KESKA, W. – GIERZ, L. 2011. Mathematical modeling and computer simulation of sowing. In 69th International Conference on Agricultural Engineering Land Technik AgEng, Hannover, Germany, pp. 459–464.
- KNOPIK, L. – MIGAWA, K. 2017. Optimal age-replacement policy for non-repairable technical objects with warranty. In Eksploatacja i Niezawodnosc – Maintenance and Reliability, vol. 19, no. 2, pp. 172–178.
- KNOPIK, L. – MIGAWA, K. 2018. Multi-state model of maintenance policy. In Eksploatacja i Niezawodnosc – Maintenance and Reliability, vol. 20, no. 1, pp. 125–130.
- LANDAU, L. D. – LIFSZYC, J. 2012. Mechanics. Warszawa : PWN publishing house. ISBN 9788301151522.
- LIGAJ, B. – SZALA, G. 2010. Experimental verification of two-parametric models of fatigue characteristics by using the tests of S55J0 steel as an example. In Polish Maritime Research, vol. 17, no. 1, pp. 39–50.
- MOINFAR, A. M. – SHAHGHOLI, G. 2018. Dimensional analysis of the tractor tractive efficiency parameters. In Acta Technologica Agriculturae, vol. 21, no. 3, pp. 94–99.
- POURDARBANI, R. 2019. Choosing a proper maintenance and repair strategy for tractors (in Urmia). In Acta Technologica Agriculturae vol. 22, no. 1, pp. 12–16.
- STRZELECKI, P. – TOMASZEWSKI, T. – SEMPRUCH, J. 2016. A method for determining a complete S-N curve using maximum likelihood. In 22nd International Conference on Engineering Mechanics, Svratka, Czech Republic, pp. 530–533.
- ŤAVODOVÁ, M. – DŽUPON, M. – KALINCOVÁ, D. – HNILICOVÁ, M. 2018. Deformation of exposed tool parts for crushing of undesirable advance growth. In Acta Technologica Agriculturae, vol. 21, no. 4, pp. 166–173.
- TKÁČ, Z. – ČORŇÁK, S. – CVIKLOVIČ, V. – KOSIBA, J. – GLOS, J. – JABLONICKÝ, J. – BERNÁT, R. 2017. Research of biodegradable fluid impacts on operation of tractor hydraulic system. In Acta Technologica Agriculturae, vol. 20, no. 2, pp. 42–45.
- ZASTEMPOWSKI, M. – BOCHAT, A. 2014. Modeling of cutting process by the shear-finger cutting block. In ASABE Applied Engineering in Agriculture, vol. 30, no. 3, pp. 347–353.
- ZASTEMPOWSKI, M. – BOCHAT, A. 2015. Mathematical modelling of elastic deflection of a tubular cross-section. In Polish Maritime Research, vol. 22, no. 2, pp. 93–100.
- ZASTEMPOWSKI, M. – BOCHAT, A. 2016. Innovative constructions of cutting and grinding assemblies of agricultural machinery. In TAE 2016 – Proceedings of the 6th International Conference on Trends in Agricultural Engineering, pp. 726–735.