References
- BREZINOVÁ, J. – DRAGANOVSKÁ, D. – GUZANOVÁ, A. – BALOG, P. – VIŇÁŠ, J. 2016. Influence of the hardfacing welds structure on their wear resistance. In Metals, vol. 6, no. 2, 36. doi:10.3390/met6020036.10.3390/met6020036
- CHOTĚBORSKÝ, R. – HRABĚ, P. – MÜLLER, M. – SAVKOVÁ, J. – JIRKA, M. – NAVRÁTILOVÁ, M. 2009b. Effect of abrasive particle size on abrasive wear of hardfacing alloys. In Research in Agricultural Engineering, vol. 55, no. 3, pp. 101–113.
- CHOTĚBORSKÝ, R. – HRABĚ, P. – MŰLLER, M. – SAVKOVÁ, J. 2009a. Abrasive wear of Fe-Cr-C based welding materials. In Konstrukce [online] 2009. [2016-09-20]. Available at: http://www.konstrukce.cz/clanek/abrazivni-opotrebeni-navarovych-materialu-na-bazi-fecr-c/ (In Czech: Abrazívní opotřebení návarových materiálů na bázi Fe-Cr-C)
- HNILICA, R. – MESSINGEROVÁ, V. – STANOVSKÝ, M. – SLUGEŇ, J. – HNILICOVÁ, M. – FERENČÍK, M. 2015. Possibilities of mechanization of work on forest founding and education. Scientific monography, 99 pp. ISBN 978-80-228-2722-5 (In Slovak: Možnosti mechanizácie prác pri zakladaní a výchove lesa. Vedecká monografia).
- KALINCOVÁ, D. – ŤAVODOVÁ, M. – HNILICOVÁ, M. – VEVERKOVÁ, D. 2016. Machinery for forest cultivation – increase of resistance to abrasive wear of the tool. In MM Science Journal, no. November, pp. 1269–1272.
- KOTUS, M. – ČIČO, P. – DAŇKO, M. – ANDRÁSSYOVÁ, Z. – VYSOČANSKÁ, M. 2011. Increasing the wear resistance of the workpieces by hardening. In Acta Technologica Agriculturae, vol. 14, no. 1, pp. 20–23.
- KOVÁČ, I. – TOLNAI, R. 2004. Improvement of the mechanical properties of surface layers of steels 14 220 and 15 203 saturated boron. In Acta Technologica Agriculturae, vol. 9, no. 1, pp. 1–3.
- ĽUPTÁČIKOVÁ, V. 2016. Possibilities of categorizing soil mills according to used working tools. In Kolokvium, Technická univerzita vo Zvolene, pp. 80–89. In Slovak Možnosti kategorizovania pôdnych fréz podľa použitých pracovných nástrojov.
- MÜLLER, M. – CHOTĚBORSKÝ, R. – VALÁŠEK, P. – HLOCH, S. 2013. Unusual possibility of wear resistance increase research in the sphere of soil cultivation. In Tehnicki Vjesnik-Technical Gazette, 2013, vol. 20, no. 4, pp. 641–646.
- NÁPRSTKOVÁ, N. – CAIS, J. – KRAUS, P. – NGUYEN VAN, T. 2016. Tool wear evaluation of selected inserts after turning by electron microscopy. In Manufacturing Technology, vol. 16, pp. 1068–1073.
- STN 41 4220. 1976. Steel 14 220 Mn-Cr. Vydavatelství ÚNM, Praha 1976. (In Slovak: Oceľ 14 220 Mn-Cr)
- STN EN ISO 6506-1:2005. Metallic materials - Brinell hardness test - Part 1: Test method. SÚTN Bratislava (In Slovak: Kovové materiály: Brinellova skúška tvrdosti. Časť 1. Skúšobná metóda).
- STN EN ISO 6507-1:2018. Metallic materials - Vickers hardness test – Part 1: Test method. SÚTN Bratislava. (In Slovak: Kovové materiály: Vickersova skúška tvrdosti. Časť 1. Skúšobná metóda)
- STODOLA, J. – PEŠLOVÁ, F. – KRMELA, J. 2008. The Wear of Machine Parts. Univerzita obrany Brno, 197 pp. (In Czech: Opotřebení strojních součástí)
- SVOBODOVÁ, J. 2014. SEM and EDS Analysis used in evaluation of chemical pre-treatment based on nanotechnology. In Manufacturing Technology, Journal for Science, Research and Production, vol. 14, no. 3.
- ŤAVODOVÁ, M. – KALINCOVÁ, D. – KOTUS, M. – PAVLÍK, Ľ. 2018. The possibility of increasing the wearing resistance of mulcher tools. In Acta Technologica Agriculturae, vol. 21, no. 2, pp 87–93.
- ŽÚBOR, P. – IŽDINSKÁ, Z. – KOVAŘÍKOVÁ, I. 2014. Materials and Their Behavior During Welding. Prvá Zváračská, a. s., 121 pp. ISBN 978-80-969330-9-9 (In Slovak: Materiály a ich správanie sa pri zváraní).