References
- APEL, P. YU. – DMITRIEV, S. N. 2004. Optimization of the shape of the pores of track membranes. In Critical Technologies, Membranes, vol. 23, no. 3, pp. 32–37.
- BALOG, M. – MAĽCOVSKÝ, M. 2015. Optimization of the production process of the plastic injection molding engineering with the technology of reverse engineering application. In Acta Tecnología – International Scientific Journal about Technologies, vol. 1, no. 2, pp. 9–12.
- BOŽEK, P. – TURYGIN, Y. 2014. Measurement of the operating parameters and numerical analysis of the mechanical subsystem. In Measurement Science Review, vol. 14, no. 4, pp. 198–203.
- CHARVET, A. – PACAULT, S. – BOURROUS, S. – THOMAS, D. 2018. Association of fibrous filters for aerosol filtration in predominant Brownian diffusion conditions. In Separation and Purification Technology, vol. 207, DOI: December 22, 2018.
- GUSINSKY, G. M. – KREMER, E. B. – KREMER, M. I. – MCHEDLISHVILI, B. V. 1979. Determination of the micropores’ size of nuclear microfilters with a small diameter. In Engineering and Physics Journal, vol. 37, pp.119–129.
- KRISHNA MURTHY, C. S. – MANDAL, B. B. 2016. Biomaterials based on natural and synthetic polymer fibers. In Trends in Biomaterials, pp. 217–174.
- LESTYÁNSZKA ŠKŮRKOVÁ, K. – KUDIČOVÁ, J. 2015. Study of injection process capability in production of plastic boxes. In Acta Technologica Agriculturae, vol. 18, no. 2, pp. 54–56.
- PAN, Y. – ZHAO, H. A. 2018. Novel blowing agent polyelectrolyte for fabricating intumescent multilayer coating that retards fire on cotton fabric. In Journal of Applied Polymer Science, vol. 135, no. 32, DOI: August 20, 2018.
- PAPKOV, S. P. 1988. Theoretical foundations of the production of chemical fibers. Moscow: Chemistry, 272 pp.
- PERTON, M. – SPICA, Z. – CAUDRON, C. 2018. Inversion of the horizontal-to-vertical spectral ratio in presence of strong lateral heterogeneity. In Geophysical Journal International, vol. 212, no. 2, pp. 930–941.
- SENTYAKOV, B. A. – TIMOFEEV, V. L. 2004. The production technology of heat-insulating materials on the basis of basalt fiber. Izhevsk: Publishing house of ISTU, 232 pp.
- SENTYAKOV, B. A. – SHIROBOKOV, K. P. – SVIATSKII, V. M. 2010. Fibrous sorbent for the collection of oil based on polyethylene terephthalate. Prevention of accidents of buildings and structures. In Collection of Scientific Papers, no. 9, Moscow, pp. 631–634.
- SENTYAKOV, B. A. – SHIROBOKOV, K. P. – SVIATSKII, V. M. – SVIATSKII, V. M. 2014. Processes of obtaining and practical use of polyethylene terephthalate fiber from secondary raw materials (monograph). Stary Oskol: Publishing house TNT, 162 pp. ISBN 978-5-94178-451-6.
- SVIATSKII, V. M. – SENTYAKOV, B. A. – SVIATSKII, M. A. – SENTYAKOV, K. B. – GARAYEV, S. A. 2015. Simulation of the process of fabrication canvas with fibrous materials. In Vestnik ISTU, no. 2, pp. 17–20.