Cutting Process Capability Study

Škůrková, Katarína Lestyánszka; Žarnovský, Jozef

doi:10.2478/ata-2013-0020

.blurhash-client-img { display: none !important; }

Cutting Process Capability Study

Acta Technologica Agriculturae

Volume 16 (2013): Issue 3 (September 2013)

By: Katarína Lestyánszka Škůrková and Jozef Žarnovský

Open Access

|Dec 2013

Abstract

This study focuses on the evaluation of cutting process capability in the production of printed circuit boards according to regulation defined by ISO 9001: 2008 Quality Management Systems. Requirements. Therefore, statistical process control is analysed on the basis of normality and stability of the process, and cutting process capability indices Cp and Cpk are calculated. The values obtained for indices are Cp = 6.801 and Cpk = 5.499. Therefore, we can consider the process as capable.

References

Andrassyova, Z. et al. 2011. Assembly process capability of automotive seats. In Acta Technologica Agriculturae, vol. 14, 2011, no. 3, pp. 74-78.
Search in Google Scholar
Hrubec, J. et al. 2009. Integrovany manažersky system. Nitra : SPU. ISBN 978-80-552-0231-0.
Search in Google Scholar
Jarabova, D. 2013. Aplikacia štatistickej regulacie procesu strihania vyvodov komponentov (diploma thesis). Trnava : STU.
Search in Google Scholar
KONSTANCIAK, M. 2012. Analysis of technological strategies on the example of the production of the tramway whels. In: Archives of Materials Science and Engineering, vol. 57, 2012, no. 2, pp. 69-74.
Search in Google Scholar
Korenko , M. 2012. Manažerstvo kvality procesov. Nitra : SPU. ISBN 978-80-552-0789-6.
Search in Google Scholar
Markulik, Š. - Nag yova, A. 2009. System manažerstva kvality. Košice : TU. ISBN 978-80-553-0306-2.
Search in Google Scholar
Škůrko va, K. - Šestak, M. 2009. The capability of turning process by screws production. In Production Engineering. Novosibirsk : Novosibirsk State Technical University, 2009, pp. 49-56. ISBN 978-5-7782-1165-0.
Search in Google Scholar
STN EN ISO 8258. 1995 (010271). Shewhart control charts.
Search in Google Scholar
STN EN ISO 9001. 2009. Quality management systems. Requirements.
Search in Google Scholar
ULEV ICZ, R. - BORKOWSKI, S. 2001. The Quality System According to the Norm Qs-9000, W: MT01. The Third International Conference. Mechanical Engineering Technologies, Sofia, S. III. 70.
Search in Google Scholar

DOI: https://doi.org/10.2478/ata-2013-0020 | Journal eISSN: 1338-5267

Journal RSS Feed

Language: English

Page range: 78 - 81

Published on: Dec 31, 2013

Published by: Slovak University of Agriculture in Nitra

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

control charts,

Cp and Cpk indices,

cutting process capability,

process stability,

serial production

Related subjects:

Engineering,

Introductions and overviews,

Engineering, other

© 2013 Katarína Lestyánszka Škůrková, Jozef Žarnovský, published by Slovak University of Agriculture in Nitra
This work is licensed under the Creative Commons License.

Previous article Volume 16 (2013): Issue 3 (September 2013)Next article