References
- Adekunle, P. A., Adegboyega, A. O., Oluwole, A. O. and Oladipupo, S. O. (2015). “Comparative studies of steel, bamboo and rattan as reinforcing bars in concrete: Tensile and flexural characteristics”. Open Journal of Civil Engineering, 5(2):228 -238. DOI: 10.4236/ojce.2015.52023.
- Akinyemi, A. B., Afolayan, J. O. and Ogunji, E. O. (2016). “Some properties of composite corn cob and sawdust particle boards”. Construction and Building Materials, 127 (2): 436-441. DOI: 10.1016/j.conbuidmat.2016.10.040.
- Anbukarasi, K. and Kalaiselvam, S. (2015). “Study of the effect of fiber volume and dimension on mechanical, thermal, and water absorption behavior of luffa reinforced epoxy composites”. Materials and Design, 66(part A): 321 - 330. DOI: 10.1016/j.matdes. 2014.10.078.
- Bledzki, A. K., Franciszczak, P. and Elbadawi, M. (2015). “Polypropylene biocomposites reinforced with softwood, abaca, jute, and kenaf fibres”. Industrial Crops and Products, 70: 91-99. DOI:10.1016/j.indcrop.2015.03.013.
- Dransfield, J., Uhl, N. W., and Manokaran N. (2002). “Rattan current research issues and prospects for conservation and sustainable development”. Papers presented at the 20th Annual International Network on Bamboo and Rattan (INB AR), Rome, Italy, 5-7th December 2000. ISBN: 92-5-104691-3.
- Elakhame, Z. U., Alhassan, O. A., and Samuel, A. E. (2014). “Development and production of brake pads palm kernel shell composites”. International Journal of Scientific and Engineering Research, 5(10): 73 5-745. ISSN: 2229-5518.
- Archila, H., Kaminski, S., Trujillo, D., and Escamilla, E. Z. (2018). “Bamboo reinforcement concrete: A critical review”. Material and Science, 51:102. DOI: 10.1617/s11527-018-1228-6.
- Kiran R., G. U. Raju, K. G. and Kodancha. (2015). “Study on mechanical properties of corn cob particle and e-glass fiber reinforced hybrid polymer composites”. American Journal of Materials Science, 5(3): 86-91. DOI: 10.5923/c.materials.2 01502.18.
- Oladele, I. O. and Okoro, M.A. (2015). “Development of rattan (Calamuslongipinna) particulate reinforced paper pulp-based composites for structural application using waste papers”. Leonardo Journal of Sciences. 10(27): 75-87. ISSN: 583-0233.
- Onuoha, C., Onyemaobi, O. O., Anyakwo, C. N., and Onuegbu, G. C. (2017). “Effect of filler content and particle size on the mechanical properties of corn cob powder filled recycled polypropylene composites”. International Journal of Scientific Engineering and Applied Science. 3(4):145-151. ISSN: 239 5-3470.
- Richana, N., Irawadi, T. T. and Nur, A. M. (2007). “Corn cobs hemicelluloses isolation method comparison and its characterization with Infra-Red Spectrophotometry (FTIR) and High-Performance Liquid chromatography (HPLC)”. International journal of ChemTech Research, 6(5):3062-3070. ISSN: 0974-4290.
- Scarponi, C., and Messano, M. (2015). “Comparative evaluation between E-Glass and hemp fiber composites application in rotorcraft interiors”. Composites Part B: Engineering, 69(2): 542-549. DOI: 10.1016/j.compositesb.2014.09.0 10.
- Terzopoulou, Z. N., Papageorgiou, G. Z., Papadopoulou, E., Athanassiadou, E., Alexopoulou, E., and Bikiaris, D.N. (2015). “Green composites prepared from aliphatic polyesters and bast fibers”. Industrial Crops and Products, 68(6): 60-79. DOI: 10.1016/j.indcrop.2014. 08. 0 34.
- Xia, C. Sheldon, Q. and Cai, L. (2015). “Vacuum-assisted resin infusion (VARI) and hot pressing for CaCO3 nanoparticle treated kenaf fiber reinforced composites”. Composites Part B: Engineering, 78(7): 138-143. DOI: 10.1016/j. compositesb.2015.03.039.
- Kamprasad, C. and Rao, T. B. S. (2012). “Analysis of NACA 2412 for automobile rear spoiler using composite material”. International Journal of Engineering Research and Technology, (IJERT).1(7):1-5. ISSN: 2278-01