Evaluation of mechanical changes to clear aligners caused by exposure to different liquids
By:
References
- Camcı H, Salmanpour F. Impact of intraoral scanning conditions on the accuracy virtual aligners (VA). Australas Orthod J 2022;38(1):102–10.
- Alexandropoulos A, Al Jabbari YS, Zinelis S, Eliades T. Chemical and mechanical characteristics of contemporary thermoplastic orthodontic materials. Aust Orthod J 2015;31(2):165–70.
- Tartaglia GM, Mapelli A, Maspero C, Santaniello T, Serafin M, Farronato M, et al. Direct 3D printing of clear orthodontic aligners: current state and future possibilities. Materials (Basel) 2021; 14(7):1799.
- Iliadi A, Enzler V, Polychronis G, Peltomaki T, Zinelis S, Eliades T. Effect of cleansers on the composition and mechanical properties of orthodontic aligners in vitro. Prog Orthod 2022;23(1):54.
- Atta I, Bourauel C, Alkabani Y, et al. Physiochemical and mechanical characterisation of orthodontic 3D printed aligner material made of shape memory polymers (4D aligner material). J Mech Behav Biomed Mater 2024;150:106337.
- Šimunović L, Jurela A, Sudarević K, Bačić I, Haramina T, Meštrović S. Influence of post-processing on the degree of conversion and mechanical properties of 3d-printed polyurethane aligners. Polymers (Basel) 2023;16(1):17.
- Papadopoulou AK, Cantele A, Polychronis G, Zinelis S, Eliades T. Changes in roughness and mechanical properties of Invisalign® Appliances after one- and two-weeks use. Materials (Basel) 2019; 12(15):2406.
- Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic deformation. J Adv Join Process 2022;5:100113.
- Lombardo L, Martines E, Mazzanti V, Arreghini A, Mollica F, Siciliani G. Stress relaxation properties of four orthodontic aligner materials: A 24-hour in vitro study. Angle Orthod 2017;87(1): 11–8.
- Fang D, Li F, Zhang Y, Bai Y, Wu BM. Changes in mechanical properties, surface morphology, structure, and composition of Invisalign material in the oral environment. Am J Orthod Dentofacial Orthop 2020;157(6):745–53.
- Daniele V, Macera L, Taglieri G, Spera L, Marzo G, Quinzi V. Color stability, chemico-physical and optical features of the most common PETG and PU based orthodontic aligners for clear aligner therapy. Polymers (Basel) 2021;14(1):14.
- Liu CL, Sun WT, Liao W, et al. Colour stabilities of three types of orthodontic clear aligners exposed to staining agents. Int J Oral Sci 2016;8(4):246–53.
- Anon. Blog | Invisalign. Accessed July 29, 2024. Available at: https://www.invisalign.co.uk/blog/post/what-can-you-drink-during-your-invisalign-treatment.
- Timm LH, Farrag G, Baxmann M, Schwendicke F. Factors influencing patient compliance during clear aligner therapy: a retrospective cohort study. J Clin Med 2021;10(14):3103.
- Guo R, Zheng Y, Liu H, Li X, Jia L, Li W. Profiling of subgingival plaque biofilm microbiota in female adult patients with clear aligners: a three-month prospective study. Peer J 2018;6:e4207.
- Can E, Panayi N, Polychronis G, et al. In-house 3D-printed aligners: effect of in vivo ageing on mechanical properties. Eur J Orthod 2022;44(1):51–5.
- Lee SY, Kim H, Kim H-J, et al. Thermo-mechanical properties of 3D printed photocurable shape memory resin for clear aligners. Sci Rep 2022;12(1):6246.
- Jindal P, Juneja M, Siena FL, Bajaj D, Breedon P. Mechanical and geometric properties of thermoformed and 3D printed clear dental aligners. Am J Orthod Dentofac Orthop 2019;156(5):694–701.
- Aldweesh AH, Al-Maflehi NS, AlGhizzi M, AlShayea E, Albarakati SF. Comparison of mechanical properties and color stability of various vacuum-formed orthodontic retainers: An in vitro study. Saudi Dent J 2023;35(8):953–9.
- Zafeiriadis AA, Karamouzos A, Athanasiou AE, Eliades T, Palaghias G. An in vivo spectrophotometric evaluation of Vivera® and Essix® clear thermoplastic retainer discolouration. Australas Orthod J 2018;34(1):3–10.
- Chen S-M, Huang T-H, Ho C-T, Kao C-T. Force degradation study on aligner plates immersed in various solutions. J Dent Sci 2023;18(4):1845–9.
- Habib ANEA, Abdelmoniem SA, Mahmoud SA. Effect of children’s drinks on color stability of different dental composites: an in vitro study. J Clin Pediatr Dent 2017;41(2):120–5.
- Gawriołek M, Gawriołek K, Eliasz W, Czarnecka B, Paszynska E, Sikorski M. How does the color of restorative material change during exposure to dietary liquids due to the acquisition of a discolored layer? Coatings 2020;10(9):866.
- Zafeiriadis AA, Karamouzos A, Athanasiou AE, Eliades T, Palaghias G. In vitro spectrophotometric evaluation of Vivera clear thermoplastic retainer discolouration. Aust Orthod J 2014;30(2):192–200.
- Reschke G, Köhler D, Kupfer R, Troschitz J, Gude M, Brosius A. In-situ computed tomography and transient dynamic analysis— failure analysis of a single-lap tensile-shear test with clinch points. Proc Inst Mech Eng E: J Process Mech Eng 2024:1-9. doi:<a href="https://doi.org/10.1177/09544089241251646" target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">10.1177/09544089241251646</a>
- Son HJ, Lee KH, Sim JY, Kim HY, Kim JH, Kim WC. Pressure differences from clear aligner movements assessed by pressure sensors. Biomed Res Int 2020;2020:. Available at: /pmc/articles/ PMC7091522/. Accessed July 29, 2024
- Kohda N, Iijima M, Muguruma T, Brantley WA, Ahluwalia KS, Mizoguchi I. Effects of mechanical properties of thermoplastic materials on the initial force of thermoplastic appliances. Angle Orthod 2013;83(3):476–83.
- Tuncay OC, Bowman SJ, Nicozisis JL, Amy BD. Effectiveness of a compliance indicator for clear aligners. J Clin Orthod 2009;43(4):263–8; quiz 273–4
- Albertini P, Mazzanti V, Mollica F, Pellitteri F, Palone M, Lombardo L. Stress Relaxation properties of five orthodontic aligner materials: a 14-day in-vitro study. Bioengineering 2022;9(8):349.
- Jaggy F, Zinelis S, Polychronis G, et al. ATR-FTIR analysis and one-week stress relaxation of four orthodontic aligner materials. Materials (Basel) 2020;13(8):1868.
- Fang D, Zhang N, Chen H, Bai Y. Dynamic stress relaxation of orthodontic thermoplastic materials in a simulated oral environment. Dent Mater J 2013;32(6):946–51.
- Dupaix RB, Boyce MC. Finite strain behavior of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate)-glycol (PETG). Polymer (Guildf) 2005;46(13):4827–38.
- Kim H, Ryu KH, Baek D, Khan TA, Kim HJ, Shin S, et al. 3D printing of polyethylene terephthalate glycol-sepiolite composites with nanoscale orientation. ACS Appl Mater Interfaces 2020;12(20):23453–63.
- Johal A, Sharma NR, McLaughlin K, Zou LF. The reliability of thermoform retainers: a laboratory-based comparative study. Eur J Orthod 2015;37(5):503–7.
- Ryokawa H, Miyazaki Y, Fujishima A, Miyazaki T, Maki K. The mechanical properties of dental thermoplastic materials in a simulated intraoral environment. Orthod Waves 2006;65(2):64–72.
- Min S, Hwang CJ, Yu HS, Lee SB, Cha JY. The effect of thickness and deflection of orthodontic thermoplastic materials on its mechanical properties. Korean J Orthod 2010;40(1):16–26.
- Mantovani E, Parrini S, Coda E, et al. Micro computed tomography evaluation of Invisalign aligner thickness homogeneity. Angle Orthod 2021;91(3):343.
- Lyu X, Cao X, Yan J, Zeng R, Tan J. Biomechanical effects of clear aligners with different thicknesses and gingival-margin morphology for appliance design optimization. Am J Orthod Dentofac Orthop 2023;164(2):239–52.
- Tamer I, Öztas E, Marsan G. Orthodontic treatment with clear aligners and the scientific reality behind their marketing: a literature review. Turkish J Orthod 2019;32(4):241.
- Sayahpour B, Zinelis S, Polychronis G, et al. Effects of intraoral aging on mechanical properties of directly printed aligners vs. thermoformed aligners: an <em>in vivo</em> prospective investigation. Eur J Orthod 2024;46(1) :1-8.
- Iliadi A, Koletsi D, Eliades T. Forces and moments generated by aligner-type appliances for orthodontic tooth movement: A systematic review and meta-analysis. Orthod Craniofac Res 2019;22(4):248–58.
- Memè L, Notarstefano V, Sampalmieri F, Orilisi G, Quinzi V. ATR-FTIR analysis of orthodontic Invisalign® aligners subjected to various in vitro aging treatments. Materials (Basel) 2021;14(4):1–10.
Language: English
Page range: 75 - 86
Submitted on: Jun 1, 2024
Accepted on: Aug 1, 2024
Published on: Sep 16, 2024
Published by: Australian Society of Orthodontists Inc.
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Related subjects:
© 2024 Tarık Sarı, Hasan Camcı, Kubilay Aslantaş, published by Australian Society of Orthodontists Inc.
This work is licensed under the Creative Commons Attribution 4.0 License.