References
- Wardenier, J., Kurobane, Y., Packer, J.A., Dutta, D. and Yeomans, N.: Design guide for circular hollow section (CHS) joints under predominantly static loading (1). CIDECT (Ed.) and Verlag TÜV Rheinland, Cologne, Germany, 1991. ISBN3-88585-975-0.
- Rondal, J., Würker, K.G., Wardenier, J., Dutta, D. and Yeomans, N.: Structural stability of hollow sections (2). CIDECT (Ed.) and Verlag TÜV Rheinland, Cologne, Germany, 1991. ISBN 3-8249-0075-0.
- Packer, J.A., Wardenier, J., Kurobane Y., Dutta, D. and Yeomans, N.: Design guide for rectangular hollow section (RHS) joints under predominantly static loading (3). CIDECT (Ed.) and Verlag TÜV Rheinland, Cologne, Germany, 1992. ISBN 3-8249-0089-0.
- Twilt, L., Hass, R., Klingsch, W., Edwards, M. and Dutta, D.: Design guide for structural hollow section columns exposed to fire (4). CIDECT (Ed.) and Verlag TÜV Rheinland, Cologne, Germany, 1994. ISBN 3-8249-0171-4.
- Bergmann, R., Dutta, D., Matsui, C. and Meinsma, C.: Design guide for concrete-filled hollow section columns (5). CIDECT (Ed.) and Verlag TÜV Rheinland, Cologne, Germany, 1995. ISBN 3-8249-0298-2.
- Wardenier, J., Dutta, D., Yeomans, N., Packer, J.A. and Bucak, Ö.: Design guide for structural hollow sections in mechanical applications (6). CIDECT (Ed.) and Verlag TÜV Rheinland, Cologne, Germany, 1995. ISBN 3-8249-0302-4.
- Dutta, D., Wardenier, J., Yeomans, N., Sakae, K., Bucak, Ö. and Packer, J.A.: Design Guide for Fabrication, Assembly and Erection of Hollow Section Structures (7). CIDECT (Ed.) and TÜV Verlag, Cologne, Germany, 1998. ISBN 3-8249-0443-8.
- Zhao, X-L., Herion, S., Packer, J A., Puthli, R.S., Sedlacek, G., Wardenier, J., Weynand, K., Wingerde, A.M. van. andYeomans, N.F.: Design Guide for Circular and Rectangular Hollow Section Welded Joints under Fatigue Loading (8). CIDECT (Ed.) and TÜV Verlag, Cologne, Germany, 2000. ISBN 3-8249-0565-5.
- Jamm, W.: Form strength of welded tubular connections and tubular structures under static loading. (Translation from German). Schweissen und Schneiden, Vol. 3, Germany, 1951.
- Jim Noll, Steve Tysl, and Matt Westrich, (2009),The Use of Corrugated Metal Pipe and Structural Plate for Aggregate Tunnel and Conveyor Enclosure Applications, Professional Development Advertising Section, CONTECH Construction Products Inc.
- Natarajan, M. and Toprac, A.A.: Studies on tubular joints in Japan: Review of research reports. University of Texas Report, U.S.A., 1968.
- Togo, T.: Experimental study on mechanical behaviour of tubular joints. PhD thesis, Osaka University, Japan, 1967 (in Japanese).
- Natarajan, M. and Toprac, A.A.: Studies on tubular joints in USA: Review of research reports. University of Texas Report, U.S.A., 1969.
- Bouwkamp, J.G.: Concept on tubular joints design. Proceedings of ASCE, Vol. 90, No. ST2, U.S.A., 1964.
- Marshall, P.W. and Toprac, A.A.: Basis for tubular design. ASCE preprint 2008, April 1973, also Welding Journal, U.S.A., 1974.
- Brodka, J.: Stahlrohrkonstruktionen. VerlagsgesellschaftRüdolf Müller, Köln-Braunsfeld, Germany, 1968.
- Dutta, D., Würker, K.G.: HandbuchHohlprofile in Stahlkonstruktionen, Verlag TÜV Rheinland GmbH, Köln, Germany, 1988. ISBN 3-88585-528-3.
- Dutta, D.: Hohlprofilkonstruktionen. Ernst &Sohn, Berlin, Germany, 1999. ISBN 3-433-01310-1.
- Mang, F., Bucak, Ö.:Hohlprofilkonstruktionen, Stahlbau-Handbuch, Bd. I, Stahlbau-Verlag, Köln, Germany, 1983.
- Puthli, R.S.: Hohlprofilkonstruktionenaus Stahl nach DIN V ENV 1993 (EC3) und DIN 18 800 (11.90), Werner Verlag GmbH & Co. K.G., Düsseldorf, Germany, 1998. ISBN 3-8041-2975-7.
- Rautaruukki: Design Handbook for Rautaruukki Structural Hollow Sections. Hämeenlinna, Finland, 1998. ISBN 952-5010-22-8.
- Stahlrohr-Handbuch: 9. Aufl. Vulkan-Verlag, Essen, Germany, 1982.
- Wardenier, J.: Hollow Section Joints, Delft University Press, Delft, The Netherlands, 1982. ISBN 90.6275.084.2.
- Wanke, J.: Stahlrohrkonstruktionen. Springer Verlag, Vienna, Austria, 1966.
- “Corrugate.” Merriam-Webster.com. 2014. http://www.merriam-webster.com.
- Yokozeki, T., Takeda, S. I., Ogasawara, T., & Ishikawa, T. (2006). Mechanical properties of corrugated composites for candidate materials of flexible wing structures. Composites Part A: applied science and manufacturing, 37(10), 1578-1586.
- Hachemi, H., Kebir, H., Roelandt, J. M., &Wintrebert, E. (2011). A study of the braided corrugated hoses: Behavior and life estimation. Materials & Design,32(4), 1957-1966.
- Semenyuk, N. P., &Neskhodovskaya, N. A. (2002). On design models in stability problems for corrugated cylindrical shells. International applied mechanics, 38(10), 1245-1252.
- Semenyuk, N. P., &Neskhodovskaya, N. A. (2002). Timoshenko-type theory in the stability analysis of corrugated cylindrical shells. International applied mechanics, 38(6), 723-730.
- Semenyuk, N. P., Zhukova, N. B., &Ostapchuk, V. V. (2007). Stability of corrugated composite noncircular cylindrical shells under external pressure.International Applied Mechanics, 43(12), 13801389.
- Semenyuk, N. P., Babich, I. Y., and Zhukova, N. (2005). Natural vibrations of corrugated cylindrical shells. International Applied Mechanics, 41(5):512–519.
- Gulgazaryan, G. and Gulgazaryan, L. (2006). Vibrations of a corrugated orthotropic cylindrical shell with free edges. International Applied Mechanics, 42(12):1398–1413.
- Deutscher Dampfkesselausschuß: GlatteVierkantrohre und TeilkammernunterinneremÜberdruck, TechnischeRegelnfürDampfkessel (TRD 320), Vereinigung der TechnischenÜberwachungsvereinee.V., Essen, Germany, 1975.
- Twilt, L., Hass, R., Klingsch, W., Edwards, M. and Dutta, D.: Design guide for structural hollow section columns exposed to fire (4). CIDECT (Ed.) and Verlag TÜV Rheinland, Cologne, Germany, 1994. ISBN 3-8249-0171-4.
- Bourada, M., Kaci, A., Houari, M.S.A. and Tounsi, A. (2015), “A new simple shear and normal deformations theory for functionally graded beams”, Steel Compos. Str#uct., 18(2), 409-423.
- Hamidi, A., Houari, M.S.A., Mahmoud, S.R. and Tounsi, A. (2015), “A sinusoidal plate theory with 5-unknowns and stretching effect for thermomechanical bending of functionally graded sandwich plates”, Steel Compos. Struct., 18(1), 235-253.
- AitYahia, S., AitAtmane, H., Houari, M.S.A. and Tounsi, A. (2015), “Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories”, Struct. Eng. Mech., 53(6), 1143-1165.
- Attia, A., Tounsi, A., AddaBedia, E.A. and Mahmoud, S.R. (2015), “Free vibration analysis of functionally graded plates with temperature-dependent properties using various four variable refined plate theories”, Steel Compos. Struct., 18(1), 187-212.
- Bouchafa, A., Bouiadjra, M. B., Houari, M. S. A., & Tounsi, A. (2015). Thermal stresses and deflections of functionally graded sandwich plates using a new refined hyperbolic shear deformation theory. Steel Compos. Struct, 18(6), 1493-1515.
- Bouderba, B., Houari, M.S.A. and Tounsi, A. 2013) “Thermomechanical bending response of FGM thick plates resting on Winkler–Pasternak elastic foundations”, Steel Compos. Struct., 14(1), 85-104.
- SCI P364 Steel Building Design: Worked Examples - Open Sections, 2009 (A 2017 revised edition is available from SCI)
- Zuo, Wenkang, Man-Tai Chen, and Ben Young. “Structural behaviour of cold-formed steel elliptical hollow section stub columns after exposure to ISO-834 fire curve.” Thin-Walled Structures (2023): 111309.