Implementation of 5-axis Robot Arm for Automatic Processes

Enes Bugra Bayir; Lida Kouhalvandi; Farzad Mir

doi:10.2478/amset-2022-0017

Abstract

This project devotes to implement the 5-axis movable robot arm leads to provide an automated process for capturing the utensils. The main target is to perform material separation manually and via android program using a 5-axis movable robot arm. In this generated environment, there is information about the electrical circuits, mechanical structures and software of a robot arm that can be used in automation systems. Practically, an experimental study is developed to move the robot arm by adjusting the angular values it receives by remote connection and positioning the motors. 3D printer filaments, which are light in weight, and gear sets of the servo motor are used in order not to burden the servo motors in the mechanical parts of the robot.

References

[1] O. SeungSub, H. Jehun, J. Hyunjung, L. Soyeon, and S. Jinho, “A study on the disaster response scenarios using robot technology,” in 2017 14th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI), 2017, pp. 520–523.10.1109/URAI.2017.7992658
Search in Google Scholar Back to article
[2] R. Designer and T. Takahashi, “Robot designer or robot creator,” in RO-MAN 2007 - The 16th IEEE International Symposium on Robot and Human Interactive Communication, 2007, pp. 507–507.10.1109/ROMAN.2007.4415137
Search in Google Scholar Back to article
[3] P. Hu, J. Li, J. Guo, L. Zhang, and J. Feng, “The architecture, methodology and implementation of step-nc compliant closed-loop robot machining system,” IEEE Access, pp. 1–1, 2022.10.1109/ACCESS.2022.3208160
Search in Google Scholar Back to article
[4] M. Abdelaal, “A study of robot control programing for an industrial robotic arm,” in 2019 6th International Conference on Advanced Control Circuits and Systems (ACCS) 2019 5th International Conference on New Paradigms in Electronics information Technology (PEIT), 2019, pp. 23–28.10.1109/ACCS-PEIT48329.2019.9062878
Search in Google Scholar Back to article
[5] K.-H. Lee, H.-S. Kim, S.-J. Lee, S.-W. Choo, S.-M. Lee, and K.-T. Nam, “High precision hand-eye self-calibration for industrial robots,” in 2018 International Conference on Electronics, Information, and Communication (ICEIC), 2018, pp. 1–2.10.23919/ELINFOCOM.2018.8330661
Search in Google Scholar Back to article
[6] J.-W. Lee, G.-T. Park, J.-S. Shin, and J.-W. Woo, “Industrial robot calibration method using denavit — hatenberg parameters,” in 2017 17th International Conference on Control, Automation and Systems (ICCAS), 2017, pp. 1834–1837.10.23919/ICCAS.2017.8204265
Search in Google Scholar Back to article
[7] Y. Ninomiya, Y. Arita, R. Tanaka, T. Nishida, and N. I. Giannoccaro, “Automatic calibration of industrial robot and 3d sensors using real-time simulator,” in 2018 International Conference on Information and Communication Technology Robotics (ICT-ROBOT), 2018, pp. 1–4.10.1109/ICT-ROBOT.2018.8549889
Search in Google Scholar Back to article
[8] F. Mir, L. Kouhalvandi, L. Matekovits, and E. O. Gunes, “Automated optimization for broadband flat-gain antenna designs with artificial neural network,” IET Microwaves, Antennas & Propagation, vol. 15, no. 12, pp. 1537–1544, 2021. [Online]. Available: https://ietresearch.onlinelibrary.wiley.com/doi/abs/10.1049/mia2.12137 10.1049/mia2.12137
Back to article
[9] L. Kouhalvandi, F. Mir, and L. Matekovits, “Patch antenna array design through bottom-up and bayesian optimizations,” in 2021 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (APS/URSI), 2021, pp. 779–780.10.1109/APS/URSI47566.2021.9703781
Search in Google Scholar Back to article
[10] F. Mir, L. Matekovits, L. Kouhalvandi, and E. O. Gunes, “Optimization for wideband linear array antenna through bottom-up method,” in 2020 IEEE International Conference on Electrical Engineering and Photonics (EExPolytech), 2020, pp. 51–54.10.1109/EExPolytech50912.2020.9243969
Search in Google Scholar Back to article
[11] J. Oh, K. Lee, T. Hughes, S. Forrest, and K. Sarabandi, “Flexible antenna integrated with an epitaxial lift-off solar cell array for flapping-wing robots,” IEEE Transactions on Antennas and Propagation, vol. 62, no. 8, pp. 4356–4361, 2014.10.1109/TAP.2014.2322895
Search in Google Scholar Back to article
[12] J.-H. Kim and S. Nam, “A compact quasi-isotropic antenna based on folded split-ring resonators,” IEEE Antennas and Wireless Propagation Letters, vol. 16, pp. 294–297, 2017.10.1109/LAWP.2016.2573849
Search in Google Scholar Back to article
[13] F. Mir, L. Matekovits, and A. De Sabata, “Symmetry-breaking manipulation in the design of multifunctional tunable frequency selective surface,” AEU - International Journal of Electronics and Communications, vol. 142, p. 154003, 2021. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S1434841121004003 10.1016/j.aeue.2021.154003
Back to article