References
- [1] Chuang, S.Y., Sahoo, N., Lin, H.W. and Chang, Y.H. (2019), Predictive Maintenance with Sensor Data Analytics on a Raspberry Pi-Based Experimental Platform, Sensors, vol. 19, no.18, 3884.10.3390/s19183884676731131505843
- [2] Adu-Amankwa, K., Attia, A.K., Janardhanan, M.N. and Patel, I. (2019), A predictive maintenance cost model for CNC SMEs in the era of industry 4.0, International Journal of Advanced Manufacturing Technology, vol. 104, no. 9-12, pp 3567-3587.10.1007/s00170-019-04094-2
- [3] Fan, S., Zhan, J. (2016). An intelligent condition-based monitoring and maintenance system for wind turbine. In Proceedings of the 2016 3rd International Conference on Systems and Informatics (ICSAI), Shanghai, China, 19-21 November 2016, pp. 399-404.10.1109/ICSAI.2016.7810988
- [4] Fu, C., Ye, L., Liu, Y., Yu, R., Lung, B., Cheng, Y. and Zeng, Y. (2004). Predictive maintenance in intelligent-control-maintenance-management system for hydroelectric generating unit. IEEE Trans. Energy Convers., vol. 19, pp. 179-186.10.1109/TEC.2003.816600
- [5] Hashemian, H.M. and Bean, W.C. (2011), State-of-the-Art predictive maintenance techniques. IEEE Trans. Instrum. Meas. vol. 60, pp. 3480-3492.10.1109/TIM.2009.2036347
- [6] Malik, H., Kr, B.A., Kr, M., and Jarial, R.K. (2011), Application research based on modern technology to investigating causes and detection of failures in transformers on the bases of importance level. In Proceedings of the 2011 Annual IEEE India Conference, Hyderabad, India, 16-18 December 2011, pp. 1-6.10.1109/INDCON.2011.6139577
- [7] Hanyun, Z. and Shunfang, H. (2015), The Research of data mining analysis system based on Pearson relation. In Proceedings of the 2015 2nd International Conference on Information Science and Control Engineering, Shanghai, China, 24-26 April 2015, pp. 508-511.10.1109/ICISCE.2015.118
- [8] Marichal, G.N., Avila, D., Hernandez, A., Padron, I. and Castejon, C. (2018). Feature extraction from indirect monitoring in marine oil separation systems, Sensors, vol. 18, 3159.
- [9] Samhouri, M., Al-Ghandoor, A., Ali, S.A., Hinti, I. and Massad, W. (2009), An intelligent machine condition monitoring system using time-based analysis: Neuro-Fuzzy versus Neural Network. Jordan J. Mech. Ind. Eng., vol. 3, 294-305.
- [10] Gou, X., Bian, C., Zeng, F., Xu, Q., Wang, W., Yang, S. (2018), A Data-Driven smart fault diagnosis method for electric motor. In Proceedings of the 2018 IEEE International Conference on Software Quality, Reliability and Security Companion (QRS-C), Lisbon, Portugal, 16–20 July 2018; pp. 250–257.10.1109/QRS-C.2018.00053
- [11] Syafrduin, M., Alfian, G., Fitriyani, N.L., Rhee, J. (2018), Performance analysis of IoT based sensor, big data processing, and machine learning model for real time monitoring system in automative manufacturing, Sensors, vol. 18, 2946.
- [12] Vianna, W.O.L., Yoneyama, T. (2018), Predictive maintenance optimization for aircraft redundant systems subjected to multiple wear profiles. IEEE Syst. J., vol. 12, pp. 1170-1181.10.1109/JSYST.2017.2667232
- [13] Jung, D., Zhang, Z., Winslett, M. (2017), Vibration Analysis for IoT Enabled Predictive Maintenance. In Proceedings of the 2017 33rd IEEE International Conference on Data Engineering (ICDE), San Diego, CA, USA, 19–22 April 2017, pp. 1271-1282.10.1109/ICDE.2017.170
- [14] Patil, R.B., Patil, M.A., Ravi, V. and Naik, S. (2017), Predictive modelling for corrective maintenance of imaging devices from machine logs. In Proceedings of the 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Seogwipo, Korea, 11–15 July 2017, pp. 1676–1679.
- [15] Sipos, R., Fradkin, D., Moerchen, F. and Wang, Z. (2014), Log-based predictive maintenance. In Proceedings of the 20th ACM SIGKDD International Conference on Knowledge Discovery and Data Mining (SIGKDD 2014), New York, NY, USA, 24–27 August 2014, pp. 1867–1876.10.1145/2623330.2623340
- [16] Rodseth, H. and Schjolberg, P. Data-driven predictive maintenance for green manufacturing. In Proceedings of the 6th International Workshop of Advanced Manufacturing and Automation (IWAMA 2016), Manchester, UK, 10–11 November 2016, pp. 36–41.
- [17] Chen, X., Kopsaftopoulos, F., Wu, Q., Ren, H. and Chang, F.K. (2018), Flight state identification of a self-sensing wing via an improved feature selection method and machine learning approaches, Sensors, vol. 18, 1379.
- [18] Susto, G.A., Wan, J., Pampuri, S., Zanon, M., Johnston, A.B., O’Hara, P.G. and McLoone, S. (2014), An adaptive machine learning decision system for flexible predictive maintenance. In Proceedings of the 10th IEEE International Conference on Automation Science and Engineering (CASE 2014), Taipei, Taiwan, 18–22 August 2014; pp. 806-811.10.1109/CoASE.2014.6899418
- [19] Borgi, T., Hidri, A., Neef, B. and Naceur, M.S. (2017), Data analytics for predictive maintenance of industrial robots. In Proceedings of the 2017 International Conference on Advanced Systems and Electric Technologies (IC_ASET), Hammamet, Tunisia, 14-17 January 2017, pp. 412-417.10.1109/ASET.2017.7983729
- [20] Balogh, Z., Gatial, E., Barbosa, J., Leitão, P., Matejka, T. Reference Architecture for a Collaborative Predictive Platform for Smart Maintenance in Manufacturing, 2018 IEEE 22nd International Conference on Intelligent Engineering Systems (INES), 2018, pp. 299-304, doi: 10.1109/INES.2018.8523969.
- [21] The Social Network of Machines Chist-ERA Project Homepage, Accessed: May 30, 2022, Web: https://soon-project.eu/
- [22] Ghorbel, H., Dreyer, J., Abdalla, F., Montequin, V.R., Balogh, Z., Gatial, E., Bundinska, I., Gligor, A., Iantovics, L.B., Carrino, S. SOON: Social Network of Machines to Optimize Task Scheduling in Smart Manufacturing, 2021 IEEE 32nd Annual International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC), 2021, pp. 1-6, doi: 10.1109/PIMRC50174.2021.9569644.
- [23] Gatial, E., Balogh, Z., Hluchý, L. “Concept of Energy Efficient ESP32 Chip for Industrial Wireless Sensor Network,” 2020 IEEE 24th International Conference on Intelligent Engineering Systems (INES), 2020, pp. 179-184, doi: 10.1109/INES49302.2020.9147189.
- [24] van der Maaten, L.J.P. and Hinton, G.E. (2008). Visualizing Data Using t-SNE. Journal of Machine Learning Research, vol. 9, pp. 2579-2605.
- [25] Heideman, M.T., Johnson, D.H.; and Burrus, C.S. (1984), Gauss and the history of the fast Fourier transform. IEEE ASSP Magazine, vol. 1, no. 4, pp. 14-2110.1109/MASSP.1984.1162257
- [26] Iantovics, L.B., and Enachescu, C. (2022). Method for Data Quality Assessment of Synthetic Industrial Data, Sensors, vol. 22, no. 4, 1608, DOI: 10.3390/s22041608 887697735214509