References
- 1. Lal H, Patralekh MK. 3D printing and its applications in orthopaedic trauma: A technological marvel. J Clin Orthop Trauma. 2018;9(3):260-268.10.1016/j.jcot.2018.07.022
- 2. Papagelopoulos PJ, Savvidou OD, Koutsouradis P, Chloros GD, Bolia IK, Sakellariou VI, Kontogeorgakos VA, Mavrodontis II, Mavrogenis AF, Diamantopoulos P. Three-dimensional Technologies in Orthopedics. Orthopedics. 2018;41(1):12-20.10.3928/01477447-20180109-04
- 3. Pfeiffer FM. The Use of Finite Element Analysis to Enhance Research and Clinical Practice in Orthopedics. J Knee Surg. 2016;29(2):149-58.10.1055/s-0035-1570114
- 4. Moldovan F, Gligor A, Bataga T. Integration of Three-dimensional Technologies in Orthopedics: A Tool for Preoperative Planning of Tibial Plateau Fractures. Acta Inform Med. 2020;28(4):278-282.10.5455/aim.2020.28.278-282
- 5. Braun BJ, Grimm B, Hanflik AM, Marmor MT, Richter PH, Sands AK, Sivananthan S. Finding NEEMO: towards organizing smart digital solutions in orthopaedic trauma surgery. EFORT Open Rev. 2020;5(7):408-420.10.1302/2058-5241.5.200021
- 6. Segaran N, Saini G, Mayer JL, Naidu S, Patel I, Alzubaidi S, Oklu R. Application of 3D Printing in Preoperative Planning. J Clin Med. 2021;10(5):917.10.3390/jcm10050917
- 7. Bagaria V, Deshpande S, Rasalkar DD, Kuthe A, Paunipagar BK. Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures. Eur J Radiol. 2011;80(3):814-20.10.1016/j.ejrad.2010.10.007
- 8. Zhong H, Ma S, Cen Y, Ma L, Li D, Liang B, Chen J, Zhang Y. A case report of early unilateral external fixation by 3D printing and computer-assisted and secondary bone graft internal fixation in pseudarthrosis of the tibia surgery. J Int Med Res. 2020;48(9):300060520945518.10.1177/0300060520945518
- 9. Wang C, Chen Y, Wang L, Wang D, Gu C, Lin X, Liu H, Chen J, Wen X, Liu Y, Huang F, Yao L, Fan S, Huang W, Dong J. Three-dimensional printing of patient-specific plates for the treatment of acetabular fractures involving quadrilateral plate disruption. BMC Musculoskelet Disord. 2020;21(1):451.10.1186/s12891-020-03370-7
- 10. Kim HN, Liu XN, Noh KC. Use of a real-size 3D-printed model as a preoperative and intraoperative tool for minimally invasive plating of comminuted midshaft clavicle fractures. J Orthop Surg Res. 2015;10:91.10.1186/s13018-015-0233-5
- 11. Liu P, Hewitt N, Shadid W, Willis A. A system for 3D reconstruction of comminuted tibial plafond bone fractures. Comput Med Imaging Graph. 2021;89:101884.10.1016/j.compmedimag.2021.101884
- 12. Wang J, Wang X, Wang B, Xie L, Zheng W, Chen H, Cai L. Comparison of the feasibility of 3D printing technology in the treatment of pelvic fractures: a systematic review and meta-analysis of randomized controlled trials and prospective comparative studies. Eur J Trauma Emerg Surg. 2020; Epub ahead of print.10.1007/s00068-020-01532-9
- 13. Yang L, Shang XW, Fan JN, He ZX, Wang JJ, Liu M, Zhuang Y, Ye C. Application of 3D Printing in the Surgical Planning of Trimalleolar Fracture and Doctor-Patient Communication. Biomed Res Int. 2016;2016:2482086.10.1155/2016/2482086
- 14. Yang L, Grottkau B, He Z, Ye C. Three dimensional printing technology and materials for treatment of elbow fractures. Int Orthop. 2017;41(11):2381-2387.10.1007/s00264-017-3627-7
- 15. Campana V, Cardona V, Vismara V, Monteleone AS, Piazza P, Messinese P, Mocini F, Sircana G, Maccauro G, Saccomanno MF. 3D printing in shoulder surgery. Orthop Rev (Pavia). 2020;12(Suppl 1):8681.10.4081/or.2020.8681
- 16. Jastifer JR, Gustafson PA. Three-Dimensional Printing and Surgical Simulation for Preoperative Planning of Deformity Correction in Foot and Ankle Surgery. J Foot Ankle Surg. 2017;56(1):191-195.10.1053/j.jfas.2016.01.052
- 17. Zhou X, Zhang D, Xie Z, Yang Y, Chen M, Liang Z, Zhang G, Li S. Application of 3D printing and framework internal fixation technology for high complex rib fractures. J Cardiothorac Surg. 2021;16(1):5.10.1186/s13019-020-01377-8
- 18. Liodakis E, Bruns N, Macke C, Krettek C, Omar M. 3D-Druck-Template-gestützte Reposition von Frakturen der langen Röhrenknochen [3D-printed template-assisted reduction of long bone fractures]. Unfallchirurg. 2019;122(4):286-292.10.1007/s00113-019-0627-7
- 19. Marinescu R, Popescu D, Laptoiu D. A Review on 3D-Printed Templates for Precontouring Fixation Plates in Orthopedic Surgery. J Clin Med. 2020;9(9):2908.10.3390/jcm9092908
- 20. Krettek C, Bruns N. Aktueller Stand und neue Entwicklungen des 3D-Drucks in der Unfallchirurgie [Current concepts and new developments of 3D printing in trauma surgery]. Unfallchirurg. 2019;122(4):256-269.10.1007/s00113-019-0636-6
- 21. Morgan C, Khatri C, Hanna SA, Ashrafian H, Sarraf KM. Use of three-dimensional printing in preoperative planning in orthopaedic trauma surgery: A systematic review and meta-analysis. World J Orthop. 2020;11(1):57-67.10.5312/wjo.v11.i1.57
- 22. Chen C, Cai L, Zheng W, Wang J, Guo X, Chen H. The efficacy of using 3D printing models in the treatment of fractures: a randomised clinical trial. BMC Musculoskelet Disord. 2019;20(1):65.10.1186/s12891-019-2448-9
- 23. Chung KJ, Hong DY, Kim YT, Yang I, Park YW, Kim HN. Preshaping plates for minimally invasive fixation of calcaneal fractures using a real-size 3D-printed model as a preoperative and intraoperative tool. Foot Ankle Int. 2014;35(11):1231-6.10.1177/1071100714544522
- 24. Yao LF, Wang HQ, Zhang F, Wang LP, Dong JH. Minimally invasive treatment of calcaneal fractures via the sinus tarsi approach based on a 3D printing technique. Math Biosci Eng. 2019;16(3):1597-1610.10.3934/mbe.2019076
- 25. Bizzotto N, Tami I, Santucci A, Adani R, Poggi P, Romani D, Carpeggiani G, Ferraro F, Festa S, Magnan B. 3D Printed replica of articular fractures for surgical planning and patient consent: a two years multi-centric experience. 3D Print Med. 2015;2(1):2.10.1186/s41205-016-0006-8
- 26. Moldovan F, Gligor A, Bataga T. Structured Integration and Alignment Algorithm: A Tool for Personalized Surgical Treatment of Tibial Plateau Fractures. J Pers Med. 2021;11(3):190.10.3390/jpm11030190
- 27. Li C, Yang M, Xie Y, Chen Z, Wang C, Bai Y, Zhu X, Li M. Application of the polystyrene model made by 3-D printing rapid prototyping technology for operation planning in revision lumbar discectomy. J Orthop Sci. 2015;20(3):475-80.10.1007/s00776-015-0706-8
- 28. Kaya I, Cingöz İD, Şahin MC, Atar M, Ozyoruk S, Sayin M, Yuceer N. Are 3D Printing Templates an Advantage in Upper Thoracic Pedicle Screw Fixation? Cureus. 2021;13(3):e13989.10.7759/cureus.13989
- 29. Sheth U, Theodoropoulos J, Abouali J. Use of 3-Dimensional Printing for Preoperative Planning in the Treatment of Recurrent Anterior Shoulder Instability. Arthrosc Tech. 2015;4(4):e311-6.10.1016/j.eats.2015.03.003
- 30. Liang H, Ji T, Zhang Y, Wang Y, Guo W. Reconstruction with 3D-printed pelvic endoprostheses after resection of a pelvic tumour. Bone Joint J. 2017;99-B(2):267-275.10.1302/0301-620X.99B2.BJJ-2016-0654.R1
- 31. Hunn SAM, Koefman AJ, Hunn AWM. 3D-printed Titanium Prosthetic Reconstruction of the C2 Vertebra: Techniques and Outcomes of Three Consecutive Cases. Spine (Phila Pa 1976). 2020;45(10):667-672.10.1097/BRS.0000000000003360
- 32. Kadakia RJ, Wixted CM, Allen NB, Hanselman AE, Adams SB. Clinical applications of custom 3D printed implants in complex lower extremity reconstruction. 3D Print Med. 2020;6(1):29.10.1186/s41205-020-00083-4
- 33. Zhang C, Cao J, Zhu H, Fan H, Yang L, Duan X. Endoscopic Treatment of Symptomatic Foot and Ankle Bone Cyst with 3D Printing Application. Biomed Res Int. 2020;2020:8323658.10.1155/2020/8323658
- 34. Starosolski ZA, Kan JH, Rosenfeld SD, Krishnamurthy R, Annapragada A. Application of 3-D printing (rapid prototyping) for creating physical models of pediatric orthopedic disorders. Pediatr Radiol. 2014;44(2):216-21.10.1007/s00247-013-2788-9
- 35. Coote JD, Nguyen T, Tholen K, Stewart C, Verter E, McGee J, Celestre P, Sarkar K. Three-Dimensional Printed Patient Models for Complex Pediatric Spinal Surgery. Ochsner J. 2019;19(1):49-53.10.31486/toj.18.0117
- 36. Ren X, Yang L, Duan XJ. Three-dimensional printing in the surgical treatment of osteoid osteoma of the calcaneus: A case report. J Int Med Res. 2017;45(1):372-380.10.1177/0300060516686514
- 37. Park JW, Kang HG, Kim JH, Kim HS. The application of 3D-printing technology in pelvic bone tumor surgery. J Orthop Sci. 2021;26(2):276-283.10.1016/j.jos.2020.03.004
- 38. Gong S, Xu W, Wang R, Wang Z, Wang B, Han L, Chen G. Patient-specific instrumentation improved axial alignment of the femoral component, operative time and perioperative blood loss after total knee arthroplasty. Knee Surg Sports Traumatol Arthrosc. 2019;27(4):1083-1095.10.1007/s00167-018-5256-0
- 39. Bonicoli E, Andreani L, Parchi P, Piolanti N, Lisanti M. Custom-fit total knee arthroplasty: our initial experience with 30 knees. Eur J Orthop Surg Traumatol. 2014;24(7):1249-54.10.1007/s00590-013-1304-0
- 40. Nam D, Park A, Stambough JB, Johnson SR, Nunley RM, Barrack RL. The Mark Coventry Award: Custom Cutting Guides Do Not Improve Total Knee Arthroplasty Clinical Outcomes at 2 Years Followup. Clin Orthop Relat Res. 2016;474(1):40-6.10.1007/s11999-015-4216-y
- 41. Hirao M, Ikemoto S, Tsuboi H, Akita S, Ohshima S, Saeki Y, Yoshikawa H, Sugamoto K, Murase T, Hashimoto J. Computer assisted planning and custom-made surgical guide for malunited pronation deformity after first metatarsophalangeal joint arthrodesis in rheumatoid arthritis: a case report. Comput Aided Surg. 2014;19(1-3):13-9.10.3109/10929088.2014.885992
- 42. Bauer AS, Storelli DAR, Sibbel SE, McCarroll HR, Lattanza LL. Preoperative Computer Simulation and Patient-specific Guides are Safe and Effective to Correct Forearm Deformity in Children. J Pediatr Orthop. 2017;37(7):504-510.10.1097/BPO.0000000000000673
- 43. Arnal-Burró J, Pérez-Mañanes R, Gallo-Del-Valle E, Igualada-Blazquez C, Cuervas-Mons M, Vaquero-Martín J. Three dimensional-printed patient-specific cutting guides for femoral varization osteotomy: Do it yourself. Knee. 2017;24(6):1359-1368.10.1016/j.knee.2017.04.016
- 44. IJpma FFA, Meesters AML, Merema BBJ, Ten Duis K, de Vries JPM, Banierink H, Wendt KW, Kraeima J, Witjes MJH. Feasibility of Imaging-Based 3-Dimensional Models to Design Patient-Specific Osteosynthesis Plates and Drilling Guides. JAMA Netw Open. 2021;4(2):e2037519.10.1001/jamanetworkopen.2020.37519
- 45. Lin CL, Fang JJ, Lin RM. Resection of giant invasive sacral schwannoma using image-based customized osteotomy tools. Eur Spine J. 2016;25(12):4103-4107.10.1007/s00586-016-4782-z
- 46. Ma L, Zhou Y, Zhu Y, Lin Z, Wang Y, Zhang Y, Xia H, Mao C. 3D-printed guiding templates for improved osteosarcoma resection. Sci Rep. 2016;6:23335.10.1038/srep23335
- 47. Li H, Qu X, Mao Y, Dai K, Zhu Z. Custom Acetabular Cages Offer Stable Fixation and Improved Hip Scores for Revision THA With Severe Bone Defects. Clin Orthop Relat Res. 2016;474(3):731-40.10.1007/s11999-015-4587-0
- 48. Stoffelen DV, Eraly K, Debeer P. The use of 3D printing technology in reconstruction of a severe glenoid defect: a case report with 2.5 years of follow-up. J Shoulder Elbow Surg. 2015;24(8):e218-22.10.1016/j.jse.2015.04.006
- 49. Imanishi J, Choong PF. Three-dimensional printed calcaneal prosthesis following total calcanectomy. Int J Surg Case Rep. 2015;10:83-7.10.1016/j.ijscr.2015.02.037
- 50. Chandhanayingyong C, Srikong K, Puncreobutr C, Lohwongwatana B, Phimolsarnti R, Chuckpaiwong B. Three-dimensional printed, proximal phalangeal prosthesis with metatarsophalangeal joint arthroplasty for the treatment of a giant cell tumor of the fifth toe: The first case report. Int J Surg Case Rep. 2020;73:84-89.10.1016/j.ijscr.2020.06.069
- 51. Qiao F, Li D, Jin Z, Gao Y, Zhou T, He J, Cheng L. Application of 3D printed customized external fixator in fracture reduction. Injury. 2015;46(6):1150-5.10.1016/j.injury.2015.01.020
- 52. Raux S, Kohler R, Garin C, Cunin V, Abelin-Genevois K. Tridimensional trunk surface acquisition for brace manufacturing in idiopathic scoliosis. Eur Spine J. 2014;23 Suppl 4:S419-23.10.1007/s00586-014-3337-4
- 53. Cobetto N, Aubin CE, Parent S, Clin J, Barchi S, Turgeon I, Labelle H. Effectiveness of braces designed using computer-aided design and manufacturing (CAD/CAM) and finite element simulation compared to CAD/CAM only for the conservative treatment of adolescent idiopathic scoliosis: a prospective randomized controlled trial. Eur Spine J. 2016;25(10):3056-3064.10.1007/s00586-016-4434-3
- 54. Dombroski CE, Balsdon ME, Froats A. The use of a low cost 3D scanning and printing tool in the manufacture of custom-made foot orthoses: a preliminary study. BMC Res Notes. 2014;7:443.10.1186/1756-0500-7-443
- 55. Tanaka KS, Lightdale-Miric N. Advances in 3D-Printed Pediatric Prostheses for Upper Extremity Differences. J Bone Joint Surg Am. 2016;98(15):1320-6.10.2106/JBJS.15.01212
- 56. Swartz AQ, Turner K, Miller L, Kuiken T. Custom, rapid prototype thumb prosthesis for partial-hand amputation: A case report. Prosthet Orthot Int. 2018;42(2):187-190.10.1177/0309364617706421
- 57. Gálvez JA, Gralewski K, McAndrew C, Rehman MA, Chang B, Levin LS. Assessment and Planning for a Pediatric Bilateral Hand Transplant Using 3-Dimensional Modeling: Case Report. J Hand Surg Am. 2016;41(3):341-3.10.1016/j.jhsa.2015.12.010