References
- Saito R, Dresselhaus G, Dresselhaus MS. Physical properties of carbon nanotubes. Imperial College Press; 1998.
- Thostenson ET, Ren Z, Chou T-W. Advances in the science and technology of carbon nanotubes and their composites: a review. Composites Science and Technology. 2001;61:1899-1912. https://doi.org/10.1016/S0266-3538(01)00094-X
- Thostenson ET, Li C, Chou T-W. Nanocomposites in context. Composites Science and Technology. 2005; 65: 491-516. https://doi.org/10.1016/j.compscitech.2004.11.003
- Shaffer MSP, Sandler JKW. Carbon nanotube/nanofibre polymer composites. Chapter 1 in Advani SG. Processing and properties of nanocomposites. World Scientific Publishing; 2007.
- De Volder MFL, Tawfick SH, Baughman RH, Hart AJ. Carbon nanotubes: present and future commercial applications. Science. 2013; 339: 535-539. https://doi.org/10.1126/science.1222453
- Tsai SW, Hahn HT. Introduction to composite materials. Lancaster: Technomic Publishing Company Inc.; 1980.
- Jones RM. Mechanics of composite materials. London-Philadelphia: Taylor & Francis; 1999.
- Gibson RF. Principles of composite material mechanics. Boca Raton London-New York: CRC Press, Taylor & Francis Group; 2012.
- Sabet M. Advanced developments in carbon polymer composites for structural applications. Iranian Polymer Journal. 2025; 34: 917-946. https://doi.org/10.1007/s13726-024-01419-1
- Kausar A, Rafique I, Muhammad B. Review of applications of polymer/carbon nanotubes and epoxy/CNT composites. Polymer-Plastics Technology and Engineering. 2016; 55: 1167-1191. https://doi.org/10.1080/03602559.2016.1163588
- Mohd Nurazzi N, Asyraf MRM, Khalina A, Abdullah N, Sabaruddin FA., Kamarudin SH, Ahmad S, Mahat AM, Lee CL, Aisyah HA, et al. Fabrication, functionalization, and application of carbon nanotube reinforced polymer composite: an overview. Polymers. 2021; 13: 1047. https://doi.org/10.3390/polym13071047
- Richardson MOW, Wisheart MJ. Review of low-velocity impact properties of composite materials. Composites Part A. 1996; 27A: 1123-1131. https://doi.org/10.1016/1359-835X(96)00074-7
- Liu H, Zhang Ch, Li Z, Zhou X. Photoelastic studies for composite dynamics. Journal of Materials Science. 1999; 34: 3479-3487.
- Malekzadeh P, Zarei AR. Free vibration of quadrilateral laminated plates with carbon nanotube reinforced composite layers. Thin-Walled Structures. 2014; 82: 221-232. http://dx.doi.org/10.1016/j.tws.2014.04.016
- Phung-Van P, Abdel-Wahab M, Liew KM, Bordas SPA, Nguyen-Xuan H. Isogeometric analysis of functionally graded nanotube-reinforced composite plates using higher-order shear deformation theory. Composite Structures. 2015;123:137-149. http://dx.doi.org/10.1016/j.compstruct.2014.12.021
- Rasoolpoor M, Ansari R, Hassanzadeh-Aghdam MK. A numerical investigation on low velocity impact response of polymer-based nanocomposite plates containing multiscale reinforcements. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021; 43: 91. https://doi.org/10.1007/s40430-021-02824-w
- Tarkashvand A, Bolhassani M, Daneshjou K, Bakhtiari M. Thermoacoustic response of polymethyl methacrylate composite shells reinforced by carbon nanotube resting on Winkler-Pasternak elastic foundation. Journal of Vibration and Control. 2024; 30: 1159-1178. https://doi.org/10.1177/10775463231157131
- Tserpes KI, Papanikos P. Finite element modeling of single-walled carbon nanotubes. Composites: Part B. 2005; 36: 468-477. https://doi.org/10.1016/j.compositesb.2004.10.003
- Li C, Chou T-W. Elastic wave velocities in single-walled carbon nanotubes. Physical Review B. 2006; 73: 245407-1-5. https://doi.org/10.1103/PhysRevB.73.245407
- Sakhaee-Pour A, Ahmadian MT, Vafai A. Vibrational analysis of single-walled carbon nanotubes using beam element. Thin-Walled Structures. 2009; 47: 646-652. https://doi.org/10.1016/j.tws.2008.11.002
- Khalili SMR, Haghbin A. Investigation on design parameters of single-walled carbon nanotube reinforced nanocomposites under impact loads. Composite Structures. 2013;98:253-260. https://doi.org/10.1016/j.compstruct.2012.09.049
- Thostenson ET, Chou T-W. On the elastic properties of carbon nanotube-based composites: modeling and characterization. Journal of Physics D: Applied Physics. 2003; 36: 573-582. https://doi.org/10.1088/0022-3727/36/5/323
- Tsai JL, Tzeng SH, Chiu YT. Characterizing elastic properties of carbon nanotubes/polyimide nanocomposites using multi-scale simulation. Composites: Part B. 2010; 41: 106-115. https://doi.org/10.1016/j.compositesb.2009.06.003
- Tserpes KI, Chanteli A. Parametric numerical evaluation of the effective elastic properties of carbon nanotube-reinforced polymers. Composite Structures. 2013; 99: 366-374. https://doi.org/10.1016/j.compstruct.2012.12.004
- Chwał M, Muc A. FEM micromechanical modelling of nanocomposites with carbon nanotubes. Reviews on Advanced Materials Science. 2021; 60: 342-351. https://doi.org/10.1515/rams-2021-0027
- Pingle P, Sherwood J, Gorbatikh L. Properties of rigid-line inclusions as building blocks of naturally occurring composites. Composite Science and Technology. 2008; 68: 2267-2272. https://doi.org/10.1016/j.compscitech.2008.04.015
- Pike MG, Oskay C. Modeling random short nanofiber- and microfiber reinforced composites using the extended finite-element method. Journal of Nanomechanics and Micromechanics. 2015; 5: A4014005-1-11. https://doi.org/10.1016/S0266-3538(01)00094-X
- Liu Y, Nishimura N, Otani Y. Large-scale modeling of carbon-nanotube composites by a fast multipole boundary element method. Computational Materials Science. 2005; 34: 173-187. https://doi.org/10.1016/j.commatsci.2004.11.003
- Wang HT, Yao ZH. A rigid-fiber-based boundary element model for strength simulation of carbon nanotube reinforced composites. Computer Modeling in Engineering and Sciences – CMES. 2008; 29: 1-13.
- Yao ZH, Xu JD, Wang HT, Zheng XP. Simulation of CNT composites using fast multipole BEM. Journal of Marine Science and Technology. 2009; 17: 194-202.
- Fedeliński P, Górski R. Analysis and optimization of dynamically loaded reinforced plates by the coupled boundary and finite element method. Computer Modeling in Engineering and Sciences – CMES. 2006; 15: 31-40.
- Fedeliński P, Górski R. Optimal arrangement of reinforcement in composites. Archives of Civil and Mechanical Engineering. 2015; 15: 525-531. https://doi.org/10.1016/j.acme.2014.05.002
- Fedeliński P. Computer modeling and analysis of microstructures with fibres and cracks. Journal of Achievements in Materials and Manufacturing Engineering. 2012; 54: 242-249.
- Fedeliński P. Effective elastic properties of composites with randomly distributed thin rigid fibres. Archive of Applied Mechanics. 2020; 91: 135-149. https://doi.org/10.1007/s00419-020-01758-4
- Durbin F. Numerical inversion of Laplace transforms: an efficient improvement to Dubner and Abate’s method. Computer Journal. 1974; 17: 371-376.
- Zhang X, Zhao M, Liang H. Improved algorithms applying the numerical Laplace method for response analyses of Timoshenko beam subjected to typical external loads. International Journal of Mechanical Sciences. 2018; 144: 186-204. https://doi.org/10.1016/j.ijmecsci.2018.05.047.
- Bakhtiari M, Tarkashvand A, Daneshjou K, Plane-strain wave propagation of an impulse-excited fluid-filled functionally graded cylinder containing an internally clamped shell. Thin-Walled Structures. 2020; 149: 106482. https://doi.org/10.1016/j.tws.2019.106482
- Dominguez J. Boundary elements in dynamics. Southampton: Computational Mechanics Publications; 1993.
- Fedeliński P, Aliabadi MH, Rooke DP. The Laplace transform DBEM method for mixed-mode dynamic crack analysis. Computers and Structures. 1996; 59: 1021-1031. https://doi.org/10.1016/0045-7949(95)00347-9
- Porządny K. FEM analysis of dynamically loaded carbon nanotube reinforced composites. MSc thesis, Supervisor Fedeliński P. Gliwice: Silesian University of Technology; 2024.