References
- Bałon P, Rejman E, Kiełbasa B, Smusz R. Using HSM Technology in Machining of Thin-Walled Aircraft Structures. Acta Mech Autom. 2022;16(1):27–33.
- Yeganefar A, Ali Niknam S, Songmene V. Machinability study of aircraft series aluminium alloys 7075-T6 and 7050-T7451. Trans Can Soc Mech Eng. 2020;44(3):427–39.
- Santos MC, Machado AR, Sales WF, Barrozo MAS, Ezugwu EO. Machining of aluminum alloys: a review. Int J Adv Manuf Technol. 2016;86(9–12):3067–80.
- Soren TR, Kumar R, Panigrahi I, Sahoo AK, Panda A, Das RK. Machinability behavior of aluminium alloys: A brief study. Mater Today Proc. 2019;18:5069–75.
- Pimenov DY, Kiran M, Khanna N, Pintaude G, Vasco MC, da Silva LRR, et al. Review of improvement of machinability and surface integrity in machining on aluminum alloys. Vol. 129, International Journal of Advanced Manufacturing Technology. Springer London. 2023; 4743– 4779.
- Yuazhi Z, Guozheng Z. Prediction of surface roughness and optimization of process parameters for efficient cutting of aluminum alloy. Adv Mech Eng. 2024;16(1):1–12.
- Pham TH, Luyen TT, Nguyen DT. Investigating the correlation between surface roughness and degree of chip segmentation in A7075 aluminum alloy milling across varied cutting speeds. Sadhana-Acad Proc Eng Sci. 2024;49(2):1–16.
- Tahmasbi A, Moungomo JBM, Samuel AM, Zedan Y, Songmene V, Samuel FH. Role of Li and Sc Additions and Machining Conditions on Cutting Forces on Milling Behavior of A7075-Based Alloys. J Manuf Mater Process. 2024;8(2).
- Ping Z, Yue X, Shuangfeng H, Ailing S, Baoshun L, Xiao Y. Experiment and simulation on the high-speed milling mechanism of aluminum alloy 7050-T7451. Vacuum. 2020;182:109778.
- Habrat W, Lisowicz J, Tymczyszyn J, Skroban A. Simulation and Experimental Study of the Termo-Mechanical Effect of the Milling Process of 7075 Aluminium Alloy. Adv Sci Technol Res J. 2024;18(3): 58–66.
- Sethupathy A, Shanmugasundaram N. Prediction of cutting force based on machining parameters on AL7075‐T6 aluminum alloy by response surface methodology in end milling. Materwiss Werksttech. 2021 Aug 16;52(8):879–90.
- Bhirud NL, Dube AS, Patil AS, Bhole KS. Multi-objective optimization of cutting parameters and helix angle for temperature rise and surface roughness using response surface methodology and desirability approach for Al 7075. Int J Interact Des Manuf. 2023;
- Ikhries II, Al-Shawabkeh AF. Novel methods for optimizing CNC aluminum alloy machining parameters in polymer mold cavities. Int J Light Mater Manuf. 2024;7(4):507–19.
- Żyłka Ł, Flejszar R, Krupa K, Lajmert P. Redefinition of precision in finishing milling: Exploring the influence of tool margin and edge micro-radius on surface roughness. Manuf Lett. 2024;41:52–8.
- Schönecker RIE, Baumann J, Garcia Carballo R, Biermann D. Fundamental Investigation of the Application Behavior and Stabilization Potential of Milling Tools with Structured Flank Faces on the Minor Cutting Edges. J Manuf Mater Process. 2024;8(4).
- Kuczmaszewski J, Łogin W, Pieśko P, Zawada-Michałowska M. Assessment of the Accuracy of High-Speed Machining of Thin-Walled EN AW-2024 Aluminium Alloy Elements Using Carbide Milling Cutter and with PCD Blades. In: Advances in Manufacturing Lecture Notes in Mechanical Engineering. 2018; 671–80.
- Teicher U, Pirl S, Nestler A, Hellmich A, Ihlenfeldt S. Surface roughness and its prediction in high speed milling of aluminum alloys with PCD and cemented carbide tools. MM Sci J. 2019;3136–41.
- Chen X, Tang J, Ding H, Liu A. Experimental study on the evolution of chip morphology, chip formation, and surface topography with cutting parameters, and their relationships in dry milling of cast aluminum alloy with PCD inserter. J Mech Sci Technol. 2021;35(4):1651–62.
- O’Toole L, Fang F. Experimental study on efficient micro-milling of Alumina with PCD and cBN micro-milling tools. nanoMan 2022 AETS 2022-2022 8th Int Conf Nanomanufacturing 4th AET Symp ACSM Digit Manuf. 2022;1–6.
- Davim JP, Maranhão C, Jackson MJ, Cabral G, Grácio J. FEM analysis in high speed machining of aluminium alloy (Al7075-0) using polycrystalline diamond (PCD) and cemented carbide (K10) cutting tools. Int J Adv Manuf Technol. 2008;39(11–12):1093–100.
- Bourlet C, Fromentin G, Harika E, Crolet A. Analysis and modeling of burr formation during the plane milling of cast aluminum alloy using polycrystalline diamond tools. J Manuf Sci Eng Trans ASME. 2016;138(8):081010.
- Karolczak P, Kołodziej M, Kowalski M. Effectiveness of Diamond Blades in the Turning of Aluminium Composites. Adv Sci Technol Res J. 2020;14(4):262–72.
- Horváth R, Czifra Á, Drégelyi-Kiss Á. Effect of conventional and non-conventional tool geometries to skewness and kurtosis of surface roughness in case of fine turning of aluminium alloys with diamond tools. Int J Adv Manuf Technol. 2015;78(1–4):297–304.
- Fraga da Silva T, Soares RB, Jesus AMP, Rosa PAR, Reis A. Simulation Studies of Turning of Aluminium Cast Alloy Using PCD Tools. Procedia CIRP. 2017;58:555–60.
- Soares RB, de Jesus AMP, Neto RJL, Chirita B, Rosa PAR, Reis A. Comparison Between Cemented Carbide and PCD Tools on Machinability of a High Silicon Aluminum Alloy. J Mater Eng Perform. 2017;26(9):4638–57.
- Soares RB, de Jesus AMP, R.J.L. N, Rosa PAR, Machado M, Reis A. Machinability of an Aluminium Cast Alloy Using PCD Tools for Turning. In: Materials Design and Applications Advanced Structured Materials. 2023; 329–46.
- Aslantas K, Hascelik A, Çiçek A. Performance evaluation of DLC and NCD coatings in micro-milling of Al7075-T6 alloy. J Manuf Process. 2022;81:976–90.
- Tamiloli N, Venkatesan J, Raja Raghu Vamsi Krishna P, Sampath Kumar T. Time domain and frequency domain of coated milling inserts using FFT spectrum. Mater Manuf Process. 2022 Dec 10;37(16):1882–92.
- Pittalà GM, Linguanotto S. A study of machinability of Al7075-T6 with solid carbide end mills. Procedia CIRP. 2022;115:148–53.
- Silva FJG, Martinho RP, Magalhães LL, Fernandes F, Sales-Contini RCM, Durão LM, et al. A Comparative Study of Different Milling Strategies on Productivity, Tool Wear, Surface Roughness, and Vibration. J Manuf Mater Process. 2024;8(3):1–26.
- Burhanudin, Margono, Suryono E, Triatmoko N, Zainuddin. The Effect of Finishing Allowance and Milling Methode on Surface Roughness in the Finishing Process of Al5052 and Al7075. Key Eng Mater. 2022;935:63–71.
- Tzotzis A, Korlos A, Verma RK, Kyratsis P. Ann-Based Surface Roughness Modelling of Aa7075-T6 Slot Milling: Cutting Technique Evaluation. Acad J Manuf Eng. 2023;21(4):27–35.
- Sivalingam V, Liu H, Tiwari S, Kumar PG, Sun M, Kai G, et al. Effect of reinforced particles on the machinability of Al alloy under MQL, cryogenic, and hybrid lubrication. Int J Adv Manuf Technol. 2024;132 (7–8):3349–61.
- Tran CC, Luu VT, Nguyen VT, Tran VT, Tran VT, Vu HD. Multi-objective Optimization of CNC Milling Parameters of 7075 Aluminium Alloy Using Response Surface Methodology. Jordan J Mech Ind Eng. 2023;17(3):393–402.
- Yapan YF, Türkeli K, Emiroğlu U, Bahçe E, Uysal A. Machining and Sustainability Performance Comparison for the Milling Process of Al6082 Alloy Under Various Minimum Quantity Lubrication Conditions. Int J Precis Eng Manuf-Green Technol. 2024;12(2):409–30.
- Guntreddi B, Ghosh A. High-speed machining of aluminium alloy using vegetable oil based small quantity lubrication. Proc Inst Mech Eng Part B J Eng Manuf. 2023;237(13):1999–2014.
- Bayat M, Amini S. Distortion analysis in axial ultrasonic assisted milling of Al 7075-T6. Int J Light Mater Manuf. 2024;7(5):678–87.
- Baraya M, Yan J, Hossam M. Improving and Predicting the Surface Roughness and the Machining Accuracy in Ultrasonic Vibration-Assisted Milling. J Vib Eng Technol. 2024;12:127–40.
- Ali MN, Khalil H, El-Hofy H. Analytical modeling of cutting force in vibration-assisted helical milling of Al 7075 alloy. J Manuf Process. 2024;119:372–84.