Slip Bands at the Tips of Narrow Slot in Brazilian Notched Disk – Plane Deformation

Andrzej Kazberuk

doi:10.2478/ama-2024-0079

Abstract

Using the method of singular integral equations, the elastic-plastic problem for notched Brazilian disk at plane deformation state was solved. Based on Dugdale model the relationships between load, notch tip opening displacement and the length of the slip bands was established. The results demonstrate the potential of the proposed method for practical applications in engineering, particularly in the assessment of structural integrity under various loading conditions.

References

Atahan HN, Tasdemir MA, Tasemir C, Ozyurt N and Akyuz S. Mode I and mixed mode fracture studies in brittle materials using the Brazilian disc specimen. Mater. Struct. 2005; 38:305–12.
Search in Google Scholar Back to article
Atkinson C, Smelser R, and Sanchez J. Combined mode fracture via the cracked Brazilian disk test. Int. J. Fract. 1982;18:279–91.
Search in Google Scholar Back to article
Awaji H and Sato S. Combined mode fracture toughness measurement by the disk test. J.Eng. Mater. Technol. 1978;100:175–82.
Search in Google Scholar Back to article
Ayatollahi M, Aliha M. Mixed mode fracture in soda lime glass analyzed by using the generalized MTS criterion. International Journal of Solids and Structures 2009; 46:311–21.
Search in Google Scholar Back to article
Ayatollahi M and Aliha M. On the use of Brazilian disc specimen for calculating mixed mode I–II fracture toughness of rock materials. Engineering Fracture Mechanics 2008;75:4631–41.
Search in Google Scholar Back to article
Ayatollahi M, Aliha M. Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading. Computational Materials Science 2007;38:660–70.
Search in Google Scholar Back to article
Belotserkovsky SM and Lifanov IK. Method of discrete vortices. CRC Press LLC. Boca Raton. 1993.
Search in Google Scholar Back to article
Dong S. Theoretical analysis of the effects of relative crack length and loading angle on the experimental results for cracked Brazilian disk testing. Engineering Fracture Mechanics 2008;75:2575–81.
Search in Google Scholar Back to article
Dugdale D. Yielding of steel sheets containing slits. J. Mech. Phys. Solids 1960; 8:100–4.
Search in Google Scholar Back to article
García VJ, Márquez CO, Zúñiga-Suárez AR, Zuñiga-Torres BC, Villalta-Granda LJ. Brazilian Test of Concrete Specimens Subjected to Different Loading Geometries: Review and New Insights. International Journal of Concrete Structures and Materials. 2017;11:343–63.
Search in Google Scholar Back to article
Johnston PR. Application of sigmoidal transformations to weakly singular and near-singular boundary element integrals. Int. J. Numer. Meth. Eng. 1999; 45:1333–48.
Search in Google Scholar Back to article
Kazberuk A. Koncentracja naprężeń wokół owalnego otworu. Acta Mech. Autom. 2007;1:25–30.
Search in Google Scholar Back to article
Kazberuk A. Application of the Deformation Fracture Criterion to Cracking of Disc Specimens with a Central Narrow Slot. Acta Mechanica et Automatica. 2022;16.
Search in Google Scholar Back to article
Kipnis LA, Cherepanov GP. Slip lines at the vertex of a wedge-like cut. J. Appl. Math. Mech. 1984; 48:112–4.
Search in Google Scholar Back to article
Kuliev VD. Plastic rupture lines at the tip of a wedge. Int. Appl. Mech. 1979; 15:221–7.
Search in Google Scholar Back to article
Leonov MY, Panasyuk VV. Development of a nanocrack in a solid. Prikl. Mekh. 1959; 5:391–401.
Search in Google Scholar Back to article
Li D, Wong LNY. The Brazilian disc test for rock mechanics applications: review and new insights. Rock mechanics and rock engineering 2013; 46:269–87.
Search in Google Scholar Back to article
Libatskii L, Kovchik S. Fracture of discs containing cracks. Mater. Sci. 1967; 3:334–9.
Search in Google Scholar Back to article
Lo KK. Modeling of plastic yielding at a crack tip by inclined slip planes. Int. J. Fract. 1979; 15:583–9.
Search in Google Scholar Back to article
Muskhelishvili NI. Some Basic Problems of the Mathematical Theory of Elasticity. Foundamental Equations Plane Theory of Elasticity Torsion and Bending. 2nd ed. Noordhoff International Publishing, Leyden. 1977:764.
Search in Google Scholar Back to article
Panasyuk VV, Savruk MP. Model for plasticity bands in elastoplastic failure mechanics. Mater. Sci. 1992; 28:41–5.7
Search in Google Scholar Back to article
Panasyuk VV, Savruk MP. Plastic strip model in elastic-plastic problems of fracture mechanics. Adv. Mech 1992; 15:123–47.
Search in Google Scholar Back to article
Rice JR. Limitations to the small scale yielding approximation for crack tip plasticity. J. Mech. Phys. Solids 1974; 22:17–26.
Search in Google Scholar Back to article
Rice JR. The location of plastic deformation. Theor. Appl. Mech. 1976; 1:207–20.
Search in Google Scholar Back to article
Savruk MP. Two-dimensional problems of elasticity for bodies with cracks (in Russian). Naukova Dumka. Kiev. 1981.
Search in Google Scholar Back to article
Savruk MP, Kazberuk A. A unified approach to problems of stress concentration near V-shaped notches with sharp and rounded tip. Int. Appl. Mech. 2007; 43:182–97.
Search in Google Scholar Back to article
Savruk MP, Kazberuk A. Stress Concentration at Notches. Springer International Publishing Switzerland. 2017;498.
Search in Google Scholar Back to article
Savruk MP, Kazberuk A. Two-dimensional fracture mechanics problems for solids with sharp and rounded V-notches. Int. J. Fract. 2010; 161:79–95.
Search in Google Scholar Back to article
Savruk MP, Osiv PN, Prokopchuk IV. Numerical analysis in plane problems of the crack theory (in Russian). Naukova Dumka, Kiev. 1989.
Search in Google Scholar Back to article
Savruk MP, Zavodovs’kyi AM, Panasyuk VY. On fracture of bodies with V-notches under plane strain. Mekhanika i fizyka ruinuvannya budivelnykh materialiv ta konstruktsii (Mechanics and physics of fracture of building materials and structures). Lviv. 2005;10:140–7.
Search in Google Scholar Back to article
Seitl S, Miarka P. Evaluation of mixed mode I/II fracture toughness of C 50/60 from Brazilian disc test. Frattura ed Integrità Strutturale 2017; 11:119–27
Search in Google Scholar Back to article
Sidi A. A new variable transformation for numerical integration. H. Brass H. and G. Hämmerlin, editors. Numerical integration IV. Ed. by Brass H and Hämmerlin G. 1993;359–73.
Search in Google Scholar Back to article
Sun CT. Fracture mechanics. Ed. by Jin ZH. Waltham. Mass. Butter-worth-Heinemann/Elsevier. 2012;311 pp.
Search in Google Scholar Back to article
Tang S. Stress intensity factors for a Brazilian disc with a central crack subjected to compression. International Journal of Rock Mechanics and Mining Sciences 2017; 93:38–45.
Search in Google Scholar Back to article
Wang Q, Gou X, Fan H. The minimum dimensionless stress intensity factor and its upper bound for CCNBD fracture toughness specimen analyzed with straight through crack assumption. Engineering Fracture Mechanics 2012; 82:1–8.
Search in Google Scholar Back to article
Xiankai B, Meng T, Jinchang Z. Study of mixed mode fracture toughness and fracture trajectories in gypsum interlayers in corrosive environment. Royal Society Open Science. 2018; 5.
Search in Google Scholar Back to article
Yarema SY, Ivanitskaya G, Maistrenko A, Zboromirskii A. Crack development in a sintered carbide in combined deformation of types I and II. Strength of Materials 1984; 16:1121–8.
Search in Google Scholar Back to article
Yarema SY. Stress state of disks with cracks, recommended as specimens for investigating the resistance of materials to crack development. Mater. Sci. 1977;12:361–74.
Search in Google Scholar Back to article
Yarema SY and Krestin GS. Determination of the modulus of cohesion of brittle materials by compressive tests on disc specimens containing cracks. Mater. Sci. 1967; 2:7–10.
Search in Google Scholar Back to article
Yarema SY, Krestin GS. Limiting equilibrium of a disk with a diametral crack. Int. Appl. Mech. 1968; 4:55–8.
Search in Google Scholar Back to article
Zhou S. Fracture Propagation in Brazilian Discs with Multiple Pre-existing Notches by Using a Phase Field Method. Periodica Polytechnica Civil Engineering 2018; 62:700–8.
Search in Google Scholar Back to article

Slip Bands at the Tips of Narrow Slot in Brazilian Notched Disk – Plane Deformation

Abstract

Paradigm

My account