References
- Menq CH, Yau HT, Lai GY. Automated Precision Measurement of Surface Profile in CAD-direct Inspection. IEEE Transactions on Robotics and Automation. 1992;8(2):268-278. https://doi.org/10.1109/70.134279
- Pahk HJ, Jung MY, Hwang SW, Kim YH, Hong YS, Kim S.G. Integrated precision inspection system for manufacturing of moulds having CAD defined features. International Journal of Advanced Manufacturing Technology. 1995;10:198-207. https://doi.org/10.1007/BF01179348
- Cho MW, Kim K. New inspection planning strategy for sculptured surfaces using coordinate measuring machine. International Journal of Production Research. 1995;33:427-444. https://doi.org/10.1080/00207549508930158
- Edgeworth R, Wilhelm RG. Adaptive sampling for coordinate metrology. Precision Engineering. 1999;23:144-154. https://doi.org/10.1016/S0141-6359(99)00004-5
- Park H, Lee JH. B-spline curve fitting based on adaptive curve refinement using dominant points. Computer-Aided Design. 2007; 39(6):439-451. https://doi.org/10.1016/j.cad.2006.12.006
- Rajamohan G, Shunmugam MS, Samuel G.L. Sampling strategies for verification of freeform profiles using coordinate measuring machines. Proceedings of 9th International Symposium on Measurement and Quality Control. Madras India. 2007;135-140.
- ElKott DF, ElMaraghy HA, ElMaraghy WH. Automatic sampling for CMM inspection planning of free-form surfaces. International Journal of Production Research. 2002;40(11): 2653-2676. https://doi.org/10.1080/00207540210133435
- ElKott DF, Veldhuis SC. Isoparametric line sampling for the inspection planning of sculptured surfaces. Computer-Aided Design. 2005;37:189-200. https://doi.org/10.1016/j.cad.2004.06.006
- ElKott DF, Veldhuis SC. CAD-based sampling for CMM inspection of models with sculptured features. Engineering with Computers. 2007;23:187-206. https://doi.org/10.1007/s00366-007-0057-y
- Obeidat SM, Raman S. An intelligent sampling method for inspecting free-form surfaces. International Journal Advanced Manufacturing Technology. 2009;40:1125-1136. https://doi.org/10.1007/s00170-008-1427-3
- Rajamohan G, Shunmugam MS, Samuel GL. Effect of probe size and measurement strategies on assessment of freeform profile deviations using coordinate measuring machine. Measurement. 2011;44: 832-841. https://doi.org/10.1016/j.measurement.2011.01.020
- Rajamohan G, Shunmugam MS, Samuel GL. Practical measurement strategies for verification of freeform surfaces using coordinate measuring machines. Metrology and Measurement Systems. 2011;18:209-222. http://dx.doi.org/10.2478/v10178-011-0004-y
- Bowen Y, Fan Q, Nuodi H, Xiaosun W, Shijing W, Dirk B. Adaptive sampling point planning for free-form surface inspection under multi-geometric constraints. Precision Engineering. 2021;72:95–101. https://doi.org/10.1016/j.precisioneng.2021.04.009
- Zhaoyu L, Dong H., Xiangyu L, Xiaoke D, Pengcheng H, Jiancheng H, Yue H, Hongyu Y, Kai T. Efficient five-axis scanning-inspection path planning for complex freeform surfaces. Robotics and Computer–Integrated Manufacturing. 2024;86:102687. https://doi.org/10.1016/j.rcim.2023.102687
- Sliusarenko O, Escudero G, González H, Bartoň A, Ortega N, Lacalle LNL. Constant probe orientation for fast contact-based inspection of 3D free-form surfaces using (3+2)-axis inspection machines. Precision Engineering. 2023;84:37–44. https://doi.org/10.1016/j.precisioneng.2023.06.013
- Magdziak M. Determining the strategy of contact measurements based on results of noncontact coordinate measurements. Procedia Manufacturing. 2020;51: 337–344. https://doi.org/10.1016/j.promfg.2020.10.048
- Lim EM, Menq CH. The prediction of dimensional error for sculptured surface productions using the ball-end milling process – part 2: surface generation model and experimental verification. International Journal of Machine Tools and Manufacture. 1995;35:1171-1185. https://doi.org/10.1016/0890-6955(94)00045-L