Determination of Static Flow Characteristics of A Prototypical Differential Valve Using Computational Fluid Dynamics
By:
References
- Polichshuk Y, Laptev N, Komarov A, Murzabekov T, Grebenyuk K. Development of agrotechnological requirements for manufacturers of technical tools and agricultural products used in precision farming. Siberian Herald of Agricultural Science. 2023;53:98–106.
- Polischuk Y, Laptev N, Komarov A. The use of automatic and parallel driving systems in agricultural production of the Republic of Kazakhstan and the efficiency of their use. Agrarian Bulletin of the. 2020;196:11–9.
- Ume C. The role of improved market access for small-scale organic farming transition: Implications for food security. J Clean Prod [Internet]. 2023;387:135889. Available from: https://www.sciencedirect.com/science/article/pii/S0959652623000471
- Squalli J, Adamkiewicz G. The spatial distribution of agricultural emissions in the United States: The role of organic farming in mitigating climate change. J Clean Prod [Internet]. 2023;414:137678. Available from: https://www.sciencedirect.com/science/article/pii/S095965262301836X
- Sivaranjani S, Rakshit A. Organic Farming in Protecting Water Quality. In: Organic Farming. 2019; 1–9.
- Parizad S, Bera S. The effect of organic farming on water reusability, sustainable ecosystem, and food toxicity. Environmental Science and Pollution Research. 2021 Sep;30:1–12.
- Vdovin S, Bogatyrev M, Nikonorov K, Korotkov P. Reducing the fluid loss in case of depressurization of tractors’ hydraulic drive. Tractors and Agricultural Machinery. 2023;90:5–12.
- von Uexküll O, Skerfving S, Doyle R, Braungart M. Antimony in brake pads-a carcinogenic component? J Clean Prod [Internet]. 2005;13(1):19–31. Available from: https://www.sciencedirect.com/science/article/pii/S0959652603001835
- Liu Y, Wu S, Chen H, Federici M, Perricone G, Li Y, et al. Brake wear induced PM10 emissions during the world harmonised light-duty vehicle test procedure-brake cycle. J Clean Prod [Internet]. 2022;361:132278. Available from: https://www.sciencedirect.com/science/article/pii/S0959652622018820
- Commision Regulation (EU) No 1230/2012 of 12 December 2012 implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council with regard to type-approval requirements for masses and dimensions of motor vehicles and their trailers and amending Directive 2007/46/EC of the European Parliament and of the Council.
- Koonthalakadu Baby D, Sridhar N, Patil H, Subramanian S. Delay compensated pneumatic brake controller for heavy road vehicle active safety systems. Proc Inst Mech Eng C J Mech Eng Sci. 2020;235.
- Kazama T. Comparison of power density of transmission elements in hydraulic, pneumatic, and electric drive systems. Mechanical Engineering Letters. 2019;5.
- Kisiel M, Szpica D, Czaban J. Determination of the flow characteristics of the trailer brake valve using computational fluid mechanics. In: Proceedings of the 27th International Scientific Conference Mechanika. 2023.
- Subramanian S. Electro-Pneumatic Brakes for Commercial Vehicles – Model Based Analysis for Control and Diagnosis. In: Schritte in die künftige Mobilität. 2013; 133–45.
- Kisiel M, Szpica D, Czaban J. Effect of differential valve chamber volume on trailer brake system response time. In: Mechanika 2022 Proceedings of the 26th International Scientific Conference. Kaunas: Kaunas University of Technology. 2022;32–3.
- Basara B, Krajnović S, Pavlovic Z, Ringqvist P. Performance analysis of Partially-Averaged Navier-Stokes method for complex turbulent flows. 2011.
- Huang X, Pang B, Chai X, Yin Y. Proposal of a turbulent Prandtl number model for Reynolds-averaged Navier–Stokes approach on the modeling of turbulent heat transfer of low-Prandtl number liquid metal. Front Energy Res. 2022;10:928693.
- Sang Y, Wang X, Sun W. Analysis of fluid flow through a bidirectional cone throttle valve using computational fluid dynamics. Australian Journal of Mechanical Engineering. 2019;19:1–10.
- Lee JH, Song X, Park YC, Kang SM. Computational fluid dynamic analysis of flow coefficient for pan check valve. In: Proceedings of the 9th WSEAS International Conference on Applied Computer and Applied Computational Science. ACACOS ’10. 2010; 157–60.
- Zhou XM, Wang ZK, Zhang YF. A simple method for high-precision evaluation of valve flow coefficient by computational fluid dynamics simulation. Advances in Mechanical Engineering. 2017;9.
- Gabel T, Mitra H, Williams D, Koeck F, Ostilla-Mónico R, Alba K. Incompressible flow through choke valve: An experimental and computational investigation. J Fluids Struct. 2022;113:103669.
- Garcia S, Iglesias-Rey P, Mora-Meliá D, Martinez-Solano F, Fuertes-Miquel V. Computational Determination of Air Valves Capacity Using CFD Techniques. Water (Basel). 2018;10:1433.
- Mitra H, Gabel T, Williams D, Koeck F, Ostilla-Mónico R, Alba K. Computational study of compressible flow through choke valve. J Fluids Struct. 2022;113.
- Hazzi F, Cardona CS, Pairetti C, Venier C. CFD analysis on flow control using a ball valve. Anales AFA. 2022;33:21–5.
- Gukop N, Kamtu P, Lengs B, Babawuya A, Adegoke A. Effect of Mesh Density on Finite Element Analysis Simulation of a Support Bracket. FUOYE Journal of Engineering and Technology. 2021;6.
- Lubimyi N, Mihail G, Andrey P, Arseniy S. Methodology for the Selection of Optimal Parameters of the Finite Element Mesh in Composite Materials Calculation. In 2023. p. 66–72.
- Pisarciuc C, Dan I, Cioară R. The Influence of Mesh Density on the Results Obtained by Finite Element Analysis of Complex Bodies. Materials. 2023;16:2555.
- Jurkowski S, Janisz K. Analiza wpływu parametrów siatki obliczeniowej na wynik symulacji przepływomierza. Autobusy. 2020;12:129–34.
- Kamiński Z, Kulikowski K. Measurement and evaluation of the quality of static characteristics of brake valves for agricultural trailers. Measurement. 2017;106:173–8.
- Kamiński Z, Kulikowski K. Determination of the functional and service characteristics of the pneumatic system of an agricultural tractor with mechanical brakes using simulation methods. Eksploatacja i Niezawodnosc. 2015;17(3):355–64.
- Kamiński Z. Mathematical modelling of the trailer brake control valve for simulation of the air brake system of farm tractors equipped with hydraulically actuated brakes. Maintenance and Reliability. 2014;16(4):637–43.
- Wu CC, Völker D, Weisbrich S, Neitzel F. The finite volume method in the context of the finite element method. Mater Today Proc. 2022;62.
- Yang P, Wang X, Li Y. Construction and analysis of the quadratic finite volume methods on tetrahedral meshes. Sci China Math. 2023;66:855–86.
- Jonuskaite A. Flow simulation with SolidWorks. [Helsinki]: Arcada University of Applied Sciences. 2017.
- Sobachkin A, Dumnov G. Numerical Basis of CAD-Embedded CFD. NAFEMS World Congress. 2013.
- Wang F, di Mare L. Favre-Averaged Nonlinear Harmonic Method for Compressible Periodic Flows. AIAA Journal. 2019;57:1–10.
- Pavlenko A, Nadrygailo T. On one simulation method of turbulent flows. Journal of New Technologies in Environmental Science. 2019;3(4):169–78.
Language: English
Page range: 593 - 602
Submitted on: Nov 21, 2023
Accepted on: May 20, 2024
Published on: Oct 30, 2024
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2024 Marcin Kisiel, Dariusz Szpica, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.