References
- Haardt R., Godet M. Axial vibration of a misaligned radial face seal under a constant closure force. ASLE Trans, 1975;18: 55-61. https://doi.org/10.1080/05698197508982747
- Etsion I. Squeeze effects in radial face seals. J. Lubric. Technol., 1980; 102: 145-152. https://doi.org/10.1115/1.3251452
- Sharoni A., Etsion I. Performance of end-face seals with diametral tilt and coning-hydrodynamic effects. ASLE Trans, 1978; 24: 61-70. https://doi.org/10.1080/05698198108982998
- Lebeck A. O., Teale J. L., Pierce R. E. Hydrodynamic lubrication and wear in wavy contacting face seals. J.Lubric. Technol, 1978; 100: 81-91. https://doi.org/10.1115/1.3453120
- Ruddy A. V., Dowson D., Taylor C. M. The prediction of film thickness in a mechanical face seal with circumferential waviness on both the face and the seat. Journal of Mechanical Engineering Science, 1982; 24(1): 37-43. https://doi.org/10.1243/JMES_JOUR_1982_024_008_02
- Key W. E., Salant R. F., Payvar P., Gopalakrishnan S., Vaghasia G. Analysis of a Mechanical Seal with Deep Hydropads. Tribology Transactions, 1989; 32(4): 481–489. https://doi.org/10.1080/10402008908981916
- Nakano M, Korenaga A, Korenaga A, et al. Applying micro-texture to cast iron surfaces to reduce the friction coefficient under lubricated conditions. Tribol. Lett. 2007; 28: 131–137. https://doi.org/10.1007/s11249-007-9257-2.
- Etsion I. State of the art in laser surface texturing. J. Tribol. 2005;127:248–253. https://doi.org/10.1115/1.1828070.
- Voevodin A.A, Zabinski J.S. Laser surface texturing for adaptive solid lubrication. Wear. 2006;261(11–12):1285–1292. https://doi.org/10.1016/j.wear.2006.03.013.
- Wang X, Adachi K, Otsuka K, Kato K. Optimization of the surface texture for silicon carbide sliding in water. Appl. Surf. Sci. 2006;253(3):1282–1286. https://doi.org/10.1016/j.apsusc.2006.01.076.
- Yan D, Qu N, Li H, Wang X. Significance of dimple parameters on the friction of sliding surfaces investigated by orthogonal experiments. Tribol. Trans. 2010;53:703–712. https://doi.org/10.1080/10402001003728889.
- Etsion I, Burstein L. A model for mechanical seals with regular micro-surface structure. Tribol. Trans. 1996;39:677-683. https://doi.org/10.1080/10402009608983582.
- Etsion I, Halperin G, Greenberg Y. Increasing mechanical seal life with laser-textured seal faces. In Proc. of 15th international conference on fluid sealing BHR group, Maastricht. 1997;3-11.
- Etsion I, Kligerman Y, Halperin G. Analytical and experimental investigation of laser-textured mechanical seal faces. Tribol. Trans. 1999;42:511-516. https://doi.org/10.1080/10402009908982248.
- Kligerman Y, Etsion I. Analysis of the hydrodynamic effects in a surface textured circumferential gas seal. Tribol. Trans. 2001;44(3):472-478. https://doi.org/10.1080/10402000108982483.
- Etsion I, Halperin G. A laser surface textured hydrostatic mechanical seal. Tribol. Trans. 2002;45(3):430-434. https://doi.org/10.1080/10402000208982570.
- Wang X.L, Hsu S.M. Integrated surface technology for friction control: A new paradigm effects of geometric shapes on friction. The 4th china international symposium on tribology. 2004;12-20.
- Yu H, Wang X, Zhou F. Geometric shape effects of surface texture on the generation of hydrodynamic pressure between conformal contacting surfaces. Tribol. Lett. 2010;37:123-130. https://doi.org/10.1007/s11249-009-9497-4
- Bai S, Peng X, Li Y, Sheng S. A hydrodynamic laser surface-textured gas mechanical face seal. Tribol. Lett. 2010;38(2):187-194. https://doi.org/10.1007/s11249-010-9589-1.
- Yu H, Deng H, Haung W, Wang X. The effect of dimple shapes on friction of parallel surfaces. Proceedings of the institution of mechanical engineers, Part J: Journal of engineering tribology. 2011;225(8):693-703. https://doi.org/10.1177/1350650111406045.
- Qiu M, Delic A, Raeymaekers B. The effect of texture Shape on the load-carrying capacity of gas-lubricated parallel slider bearings. Tribol. Lett. 2012;48:315–327. https://doi.org/10.1007/s11249-012-0027-4.
- Qiu M, Minson B, Raeymaekers B. The effect of texture shape on the friction coefficient and stiffness of gas-lubricated parallel slider bearings. Tribology International. 2013;67:278-288. https://doi.org/10.1016/j.triboint.2013.08.004.
- Raeymaekers B, Etsion I, Talke F.E. A model for the magnetic tape/guide interface with laser surface texturing. In proceedings of the ASME/STLE international joint tribology conference. 2008;669–671. https://doi.org/10.1115/IJTC2007-44173.
- Han J, Fang L, Sun J, Ge S. Hydrodynamic lubrication of microdimple textured surface using three-dimensional CFD. Tribology Transactions. 2010;53:6:860-870. https://doi.org/10.1080/10402004.2010.496070.
- Han J, Fang L, Sun J, Wang Y, Ge S, Zhu H. Hydrodynamic lubrication of surfaces with asymmetric microdimple. Tribology Transactions. 2011;54:4:607-615. https://doi.org/10.1080/10402004.2011.584364.
- Liu W, Ni H, Chen H, Wang P. Numerical simulation and experimental investigation on tribological performance of micro-dimples textured surface under hydrodynamic lubrication. International Journal of Mechanical Sciences. 2019;163:105095. https://doi.org/10.1016/j.ijmecsci.2019.105095.
- Wei Y, Tomkowski R, Archenti A. Numerical study of the influence of geometric features of dimple texture on hydrodynamic pressure generation. Metals, 2020;10:361. https://doi.org/10.3390/met10030361.
- Gangadia H, Sheth S. Influence of the Bowtie Shaped Dimples on the Performance of Sliding Surfaces under Hydrodynamic Lubrication. Tribologia - Finnish Journal of Tribology. 2023; 40(1−2): 46−58. https://doi.org/10.30678/fjt.126885
- Gangadia H, Sheth S. The Effect of Star Shaped Dimples on Sliding Surfaces under Hydrodynamic Lubrication, Tribology Online. 2023; 18(7): 457-468. https://doi.org/10.2474/trol.18.457
- ANSYS Fluent Theory Guide, 2013.
- Bakir F, Rey R, Gerber A. G, Belamri T, Hutchinson B. Numerical and experimental investigations of the cavitating behaviour of an inducer. Int. J. Totat. Mech. 2004; 10(1): 15-25. https://doi.org/10.1080/10236210490258034
- Cupillard S, Glavatskih S, Cervantes M. J. Computational fluid dynamics analysis of a journal bearing with surface texturing. Proceedings of the Institution of Mechanical Engineers. Part J: Journal of Engineering Tribology. 2008; 222(2): 97-107. https://doi.org/10.1243/13506501JET319