Have a personal or library account? Click to login

Fatigue Behaviour of Medium Carbon Steel Assessed by the Barkhausen Noise Method

Acta Mechanica et Automatica
Volume 18 (2024): Issue 1 (March 2024)
By:
Open Access
|Jan 2024

References

  1. Heyes AM. Automotive component failures. Eng Fail Anal. 1998;5(2):129–141. Available from: https://doi.org/10.1016/S1350-6307(98)00010-7
    Search in Google ScholarBack to article
  2. Meyers MA., Chawla KK. Mechanical behaviour of materials. Cambridge University Press, Cambridge, second edition, 2009.
    Search in Google ScholarBack to article
  3. Bhaumik SK. Fatigue fracture of crankshaft of an aircraft engine. Eng Fail Anal. 2002;9(3):255–263. Available from: https://doi.org/10.1016/S1350-6307(01)00022-X
    Search in Google ScholarBack to article
  4. Fonte M, Anes V, Duarte P, Reis L, Freitas M. Crankshaft failure analysis of a boxer diesel motor. Eng Fail Anal. 2015;5:109–115. Available from: https://doi.org/10.1016/j.engfailanal.2015.03.014
    Search in Google ScholarBack to article
  5. Godec M, Mandrino Dj, Jenko M. Investigation of the fracture of car’s drive shaft. Eng Fail Anal. 2009;16(4):1252–1261. Available from: https://doi.org/10.1016/j.engfailanal.2008.08.022
    Search in Google ScholarBack to article
  6. Tjernberg A. Fatigue lives for induction hardened shafts with subsur-face crack initiation. Eng Fail Anal. 2002; 9(1):45–61. Available from: https://doi.org/10.1016/S1350-6307(00)00036-4
    Search in Google ScholarBack to article
  7. Yu Z, Xu X. Failure analysis of an idler gear of diesel engine gear-box. Eng Fail Anal. 2006;13:1092–1100. Available from: https://doi.org/10.1016/j.engfailanal.2005.07.015
    Search in Google ScholarBack to article
  8. Chen B, Wang C, Wang P, Zheng S, Sun W. Research on fatigue damage in high-strength steel (FV520B) using nonlinear ultrasonic testing. Shock and Vibration 2020; 8(19):1–15. Available from: https://doi.org/10.1155/2020/8847704
    Search in Google ScholarBack to article
  9. Sarris G, Haslinger SG, Huthwaite P, Lowe MJS: Ultrasonic methods for the detection of near surface fatigue damage. NDT & E Int. 2023;135:1–13. Available from: https://doi.org/10.1016/j.ndteint.2023.102790
    Search in Google ScholarBack to article
  10. Kowalczyk D, Aniszewicz A. Experimental and simulation tests of 1MN screw coupling. Problemy Kolejnictwa. Rail. Rep. 2022;194: 97–102. Available from: https://doi.org/10.36137/1943E
    Search in Google ScholarBack to article
  11. Bjørheim F, Siriwardane SC, Pavlou D. A review of fatigue damage detection and measurement techniques. Int. J. Fat. 2022;154:1–16. Available from: https://doi.org/10.1016/j.ijfatigue.2021.106556
    Search in Google ScholarBack to article
  12. Wu H, Ziman JA, Raghuraman SR, Nebel J-E, Weber F. Starke P.: Short-time fatigue life estimation for heat treated low carbon steels by applying electrical resistance and magnetic Barkhausen noise. Materials. 2023;16:1–21. Available from: https://doi.org/10.3390/ma16010032
    Search in Google ScholarBack to article
  13. Roye W. Ultrasonic testing of spot welds in the automotive industry. Krautkramer, SD 298, 11/99, 6 pages.
    Search in Google ScholarBack to article
  14. Yuhas DE, Vorres CL, Remiasz JR, Gesch E, Yamane T. Nondestructive ultrasonic methods for quality assurance of brake pads. EuroBrake. 2012, April 16-18th 2012, Dresden Germany.
    Search in Google ScholarBack to article
  15. Lamarre A. Ultrasonic phased-array for aircraft maintencance, Amstredam, November 2009, 76 slides. Available from: https://ndt.aero/images/docs/UTPAfor%20maintenance.pdf
    Search in Google ScholarBack to article
  16. Wronkowicz A, Dragan K. Damage evaluation based on ultrasonic testing of composite aircraft elements and image analysis methods. MATEC Web of Conferences 204, IMIEC 2018, 06003. Available from: https://doi.org/10.1051/matecconf/201820406003
    Search in Google ScholarBack to article
  17. Luziński R, Ziemkiewicz J, Synaszko P, Zyluk A, Dragan KA. Comparison of composite specimens damage area measurements performed using pulsed thermography and ultrasonic NDT methods. Fat. Air. Struc. 2019; 2019(11): 68–77. Available from: https://doi.org/10.2478/fas-2019-0007
    Search in Google ScholarBack to article
  18. Drelich R, Rosiak M, Pakuła M. Application of non-contact ultrasonic method in air to study fiber-cement corrugated boards, Bull. Pol. Ac. Tech., 2021;69(2). Available from: https://doi.org/10.24425/bpasts.2021.136740
    Search in Google ScholarBack to article
  19. Callejas A, Palma R, Hernández-Figueirido D, Rus G. Damage detection using ultrasonic techniques in Concrete-Filled Steel Tubes (CFSTS) columns. Sensors. 2022;22,4400. Available from: https://doi.org/10.3390/s2212440
    Search in Google ScholarBack to article
  20. Mackiewicz S. Possibilities of ultrasonic evaluation of energetic steels as a result longterm exploitation (in Polish). Materiały Konferencyjne VII Sympozjum Informacyjno-Szkoleniowe „Diagnostyka i remonty długoeksploatowanych urządzeń energetycznych. Nowe problemy diagnostyczne na starych blokach energetycznych”, 05–07 October 2005, Ustroń, Poland.
    Search in Google ScholarBack to article
  21. Hirao M, Ogi H, Suzuki N, Ohtani T. Ultrasonic attenuation peak during fatigue of polycrystalline copper. Acta Mater. 2000;48:517–524. Available from: https://doi.org/10.1016/S1359-6454(99)00346-8
    Search in Google ScholarBack to article
  22. Luo Z, Meng Y, Fan S, Lin L. Assessment of surface/subsurface damage in early-stage fatigue: A new attempt based on LCR wave. Int. J Fat. 2023;170:107537. Available from: https://doi.org/10.1016/j.ijfatigue.2023.107537
    Search in Google ScholarBack to article
  23. Luo Z, Wang X, Ma Z, Zou L, Zhu X, Lin L. Combined quantitative evaluation on early-stage fatigue damage of coarse-grained austenite stainless steel based on EBSD and ultrasonic technique. Ultrasonics 2020;103:106090. Available from: https://doi.org/10.1016/j.ultras.2020.106090
    Search in Google ScholarBack to article
  24. Kamaya M, Kuroda M. Fatigue damage evaluation using backscatter diffraction. Mater. Trans. 2011;52:1168–1176. Available from: https://doi.org/10.1016/S1359-6454(99)00346-810.2320/matertrans.M2011014
    Search in Google ScholarBack to article
  25. Luo Z, Dong H, Ma Z, Zou L, Zhu X, Lin L. Orientation relationship between ferrite and austenite and its influence on ultrasonic attenuation in cast austenitic stainless steel. Acta Physica Sinica. 2018;67: 238102. Available from: https://doi.org/10.7498/aps.67.20181251.
    Search in Google ScholarBack to article
  26. Piotrowski L, Augustyniak B, Chmielewski M, Tomaš I. The influence of plastic deformation on magnetoelastic properties of the CSN12021 grade steel. J Magn Magn Mater. 2009;321(15):2331–2335. Available from: https://doi.org/10.1016/j.jmmm.2009.02.028
    Search in Google ScholarBack to article
  27. Blaow M, Evans JT, Shaw BA. The effect of microstructure and applied stress on magnetic Barkhausen emission in induction hardened steel. J Mater Sci. 2007;42(12):4364–4371. Available from: https://doi.org/10.1007/s10853-006-0631-5
    Search in Google ScholarBack to article
  28. Piech T. Magnetic research. Application of Barkhausen effect (in Polish). Biuro Gamma, Warsaw, 1998.
    Search in Google ScholarBack to article
  29. Jiles D. Introduction to magnetism and magnetic materials. CRC Press, Boca Raton. 1998.
    Search in Google ScholarBack to article
  30. Guyon M, Mayos M. Nondestructive evaluation of fatigue damage of steels using magnetic techniques. Review of Progress in Quantitative Nondestructive Evaluation. 14. Edited by D.O. Thompson and D.E. Chimenti, Plenum Press, New York, 1995, 1717–1724.
    Search in Google ScholarBack to article
  31. Palma ES, Mansur TR, Ferreira Silna Jr S, Alvarenga Jr A. Fatigue damage assessment in AISI 8620 steel using Barkhausen noise. Int J Fat. 2005;27(6):659-665. Available from: https://doi.org/10.1016/j.ijfatigue.2004.11.005
    Search in Google ScholarBack to article
  32. da Silva Junior SF, Mansur TR, Aguiar AE, Palma ES, Marques PV. Damage accumulation study in fatigue testing using Barkhausen noise. Proceedings of COBEM 2003, 17th International Congress of Mechanical Engineering, 10–14 November 2003, Sao Paulo, Brazil. Available from: https://www.abcm.org.br/anais/cobem/2003/html/pdf/COB03-0558.pdf
    Search in Google ScholarBack to article
  33. Sagar PS, Parida N, Das S, Dobmann G, Bhattacharya DK. Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue. 2005;27(3): 317–322. Available from: https://doi.org/10.1016/j.ijfatigue.2004.06.015
    Search in Google ScholarBack to article
  34. Augustyniak B, Piotrowski L, Chmielewski M, Kowalewski Z. Comparative study with magnetic techniques of P91 and 13HMF steels properties subjected to fatigue tests. J Elec Eng. 2012;63(7):15–18. Available from: http://iris.elf.stuba.sk/JEEEC/data/pdf/7s_112-04.pdf.
    Search in Google ScholarBack to article
  35. Palma ES, Junior AA, Mansur TR, Pinto JMA. Fatigue damage in AISI/SAE 8620 steel. Proceedings of COBEM 2003, 17th International Congress of Mechanical Engineering, 10–14 November 2003, Sao Paulo, Brazil. Available from: https://www.abcm.org.br/anais/cobem/2003/html/pdf/COB03-0066.pdf
    Search in Google ScholarBack to article
  36. Morsy MA, El-Kashif E. Repair welding reclamation of 42CrMo4 and C45 steels. Proceedings of IIW 2017 International Conference, June, 29-30 Shanghai, R.P. China.
    Search in Google ScholarBack to article
  37. Costa LL, Brito AMG., Rosiak A, Schaeffer L. Microstructure evolution of 42CrMo4 during hot forging process of hollow shafts for wind turbines. Int. J Adv. Man. Tech. 2020; 106:511–517. Available from: https://doi.org/10.1007/s00170-019-04642-w
    Search in Google ScholarBack to article
  38. Fischer A, Scholtes B, Niendorf T. Influence of deep rolling and induction hardening on microstructure evolution of crankshaft sections made from 38MnSiVS5 and 42CrMo4. HTM-J Heat Treat Mater. 2021;76:175-179. Available from: https://doi.org/10.1515/htm-2021-0002
    Search in Google ScholarBack to article
  39. Basavaraj Y, Joshi R, Setty GR. FEA of NX-11 unigraphics modelled connecting rod using different materials. Mater Today: Proc. 2021;46:2807–2813. Available from: https://doi.org/10.1016/j.matpr.2021.02.620
    Search in Google ScholarBack to article
  40. Wieczorek AN. Studies on the combined impact of external dynamic forces and quartz abrasive on the wear of chain wheels made of 42CrMo4 steel which are used in conveyors [in Polish]. Autobusy. 2016;6:1207–1210.
    Search in Google ScholarBack to article
  41. Das S, Mukhopadhyay G, Bhattacharyya S. Failure analysis of axle shaft of a fork lift. Case Studies in Eng Fail Anal. 2015;3:46–51. Available from: https://doi.org/10.1016/j.csefa.2015.01.003
    Search in Google ScholarBack to article
  42. Moorthy V, Choudhury BK, Vaidyanathan S, Jayakumar T, Rao KBS, Raj B. An assessment of low cycle fatigue using magnetic Barkhausen emission in 9Cr-1Mo ferritic steel. Int J Fat. 1999;21(3):263–269. Available from: https://doi.org/10.1016/S0142-1123(98)00079-6
    Search in Google ScholarBack to article
  43. Polák J, Man J. Mechanisms of extrusion and intrusion formation in fatigue crystalline materials. Mater Sci Eng A. 2014;596:15-24. Available from: https://doi.org/10.1016/j.msea.2013.12.005
    Search in Google ScholarBack to article
  44. Anglada-Rivera J, Padovese LR, Capó-Sánchez J. Magnetic Bark-hausen noise and hysteresis loop in commercial carbon steel: influence of applied tensile stress and grain size. J Magn Magn Mater. 2001;231(2-3):299–306. Available from: https://doi.org/10.1016/S0304-8853(01)00066-X
    Search in Google ScholarBack to article
  45. Stewart DM, Stevens KJ, Kaiser AB. Magnetic Barkhausen noise analysis of stress in steel. Curr Appl Phys. 2004;4(2-4):308–311. Available from: https://doi.org/10.1016/j.cap.2003.11.035
    Search in Google ScholarBack to article
  46. Tomita Y, Hashimoto K, Osawa N. Nondestructive estimation of fatigue damage for steel by Barkhausen noise analysis. NDT & E Inter. 1996;29(5):275–280. Available from: https://doi.org/10.1016/S0963-8695(96)00030-8
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/ama-2024-0005 | Journal eISSN: 2300-5319 | Journal ISSN: 1898-4088
Journal RSS Feed
Language: English
Page range: 40 - 47
Submitted on: Apr 26, 2023
Accepted on: Jul 6, 2023
Published on: Jan 5, 2024
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 times per year
Keywords:
fatigue,
Barkhausen noise,
structural steel,
fracture,
mechanical properties,
deformation
Related subjects:
Engineering,
Electrical engineering,
Electronics,
Mechanical engineering,
Mechanics,
Bioengineering and biomedical engineering,
Biomechanics,
Civil engineering,
Environmental engineering

© 2024 Katarzyna Makowska, Tadeusz Szymczak, Zbigniew L. Kowalewski, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous articleVolume 18 (2024): Issue 1 (March 2024)Next article