References
- Benslimane A, Bouzidi S, Methia M. Displacements and stresses in pressurized thick-walled FGM cylinders: Exact and numerical solutions. Int. J. Press. Vessel. 2018 December; 168: 219-224. https://doi.org/10.1016/j.ijpvp.2018.10.019.
- An J, Hong P, Kim J, Budden J. Elastic stresses for 90° elbows under in-plane bending. Int. J. Mech. 2011;53(9): 762-776. https://doi.org/10.1016/j.ijmecsci.2011.06.008.
- Marie S, Chapuliot S, Kayser Y, Lacire MH, Drubay B:BB, Triay M. French RSE-M and RCC-MR code appendices for flaw analysis: Presentation of the fracture.parameters calculation—Part I: General overview. Int. J. Press. Vessel. 2007 October–November; 84(10–11): 590-600.https://doi.org/10.1016/j.ijpvp.
- Li Y, Gao B, Liu S, Ding J. Finite Element Analysis of the Limit Load of Straight Pipes with Local Wall-Thinning Defects under Complex Loads. Appl. Sci. 2022 Novembre; 12(10 ): 4850; https://doi.org/10.3390/app12104850.
- Karamanos SA, Tsouvalas D, Gresnigt AM. Ultimate Bending Capacity and Buckling of Pressurized 90 deg Steel Elbows. J. Press. Vessel Technol. 2006; 128: 128–356..
- Bao S, Liu Y, Mao J, Ge R, Li X. Numerical and experimental investigation on limit load of elbow with local thinning area. International Journal of Pressure Vessels and Piping. 2019 May; 172: 414-422.doi:10.1016/j.ijpvp.2019.04.014.
- Peng C, Changyu Z. Limit Load Analysis of Elbow with Local Wall Thinning under Combined Loads. Applied Mechanics and Materials. 2015 April; 750: 198-205. https://doi.org/10.4028/www.scientific.net/AMM.750.198.
- Ansari S, Rahimi G, Citarella R, Shahbazi K, Sepe R, Esposito.. Analytical solutions for yield onset achievement in FGM thick walled cylindrical tubes undergoing thermomechanical loads. Composites Part B: Engineering. 2017 May; 116: 211-223. https://doi.org/10.1016/j.compositesb.2017.02.023.
- Lee KH, Oh CS, Kim YJ, Yoon KB. Quantification of the yield strength-to-elastic modulus ratio effect on TES plastic loads from finite element limit analyses of elbows. Engineering Fracture Mechanics. 2009 May; 76 (7): 856-875.
- Dai HL, Fu YM, Dong Z. Exact solutions for functionally graded pressure vessels in a uniform magnetic field. International Journal of Solids and Structures. 2006 September; 43(18–19): 5570-5580. https://doi.org/10.1016/j.ijsolstr.2005.
- Yavar A, Gholamhosein R.. Stress analysis of thick pressure vessel composed of functionally graded incompressible hyperelastic materials. International Journal of Mechanical Sciences. 2015 decembre; 104 : 1-7. https://doi.org/10.1016/j.ijmecs.
- Almasi A, Baghani M, Moallemi A. Thermomechanical analysis of hyperelastic thick-walled cylindrical pressure vessels, analytical solutions and FEM. International Journal of Mechanical Sciences. 2017 September; 130: 426-436.https://doi.org/10.
- Nejad Z, Kashkoli D. Time-dependent thermo-creep analysis of rotating FGM thick-walled cylindrical pressure vessels under heat flux. International Journal of Engineering Science. 2014 September; Volume 82: 222-237.https://doi.org/10.1016/j.ijengs.
- Lee M, Toi Y. Elasto-plastic damage analysis of functionally graded material disks subjected to thermal shock and thermal cycle. Nippon Kikai Gakkai Ronbunshu, A Hen. 2001; 67(655): 503-510.
- Thamburaj P, Johnson W. Propagation of Damage in Functionally Graded Materials under Impact Loads. In 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 14th AIAA/ASME/AHS Adaptive Structures Conference 7th. 2012 Jun;: https://doi.org/10.2514/6.2006-2012.
- Houari A, Mokhtari M, Bouchikhi A, Polat A, Madani K. Using finite element analysis to predict the damage in FGM-3D notched plate under tensile load; Different geometric concept. Engineering Structures. 2021 15 June; 237: 112-160. https://doi.org/10.1016/j.engstruct.2021.112160.
- Houari A, Mokhtari M, Bouchikhi A, Polat A, Madani K. Numerical analysis of the elastic-plastic behavior of a tubular structure in FGM under pressure and defect presence. Frattura ed Integrità Strutturale. 2022; 16(59): 212–231. doi: 10.3221/IGF-ESIS.59.1.
- Jin Z, Paulino G, Dodds R. Cohesive fracture modeling of elastic– plastic crack growth in functionally graded materials. Engineering Fracture Mechanics. 2003 September; 70(14): 1885-1912. https://doi.org/10.1016/S0013-7944(03)00130.
- Mori T, Tanaka K. Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metallurgica. 1973 May; 21(5): 571-574.https://doi.org/10.1016/0001-6160(73)90064-3.
- Tamura Y, Tomota H, Ozawa.. Strength and Ductility of Iron-Nickel-Carbon Alloys Composed of Austenite and Martensite with Various Strength. Proceedings of the 3rd International Conference on Strength of Metals and Alloys, Cambridge. 1973 August; 611.