References
- Hermansson F, Janssen M, Gellerstedt F. Environmental evaluation of Durapulp Bio-composite using LCA: comparison of two applications. J For. 2016; 5: 68-76.
- Kahl S, Peng RL, Calmunger M, Olsson B, Johansson S. In situ EBSD during tensile test of aluminum AA3003 sheet. Micron. 2014. 58: 15-24.
- Mohanty AK, Misra M, Drzal LT. Sustainable Bio-Composites from Renewable Resources: Opportunities and Challenges in the Green Materials World. J Polym Environ. 2002; 10(1): 19-26.
- Calì M, Pascoletti G, Gaeta M, Milazzo G, Ambu R.A New Generation of Bio-Composite Thermoplastic Filaments for a More Sustainable Design of Parts Manufactured by FDM. Appl Sci. 2020; 10(17): 5852.
- Paiva JMd, Mayer S, Rezende MC. Comparison of tensile strength of different carbon fabric reinforced epoxy composites. Mater Res. 2006; 9(1): 83-90.
- Goutham ERS, Vamshi Y, Namratha M, Gupta KB, Chandrasekar M, Naveen J. Influence of glass fibre hybridization on the open hole tensile properties of pineapple leaf fiber/epoxy composites. AIP Conf Proc;2022.
- Larbi Chaht F, Mokhtari M, Benzaama H. Using a Hashin Criteria to predict the Damage of composite notched plate under traction and torsion behavior. Frat.Integrità.Strut. 2019; 13(50): 331-341.
- SaadallahY Modeling of mechanical behavior of cork in compression. Frat.Integrità.Strut.2020; 14(53): 417-425.
- Huang Y, Frings P, Hennes E. Mechanical properties of Zylon/epoxy composite. Composites, Part B.2002; 33(2): 109-115.
- Duc F, Bourban PE, Månson JAE The role of twist and crimp on the vibration behaviour of flax fibre composites. Compos Sci Technol 2014; 102: 94-99.
- uillén-Rujano R, Avilés F, Vidal-Lesso A, Hernández-Pérez A.Closed-form solution and analysis of the plate twist test in sandwich and laminated composites. Mech Mater. 2021; 155: 103753.
- Tretyakova TV, Wildemann VE, Strungar EM. Deformation and failure of carbon fiber composite specimens with embedded defects during tension-torsion test. Frat.Integrità.Strut. 2018; 12(46):295-305.
- Liang S, Gning PB, Guillaumat L.A comparative study of fatigue behaviour of flax/epoxy and glass/epoxy composites. Compos Sci Technol. 2012; 72(5): 535-543.
- Lu Z, Feng B, Loh C.Fatigue behaviour and mean stress effect of thermoplastic polymers and composites. Frat Integrità Strut 2018;12(46): 150-157.
- Banaszkiewicz M, Dudda W. Applicability of notch stress-strain correction methods to low-cycle fatigue life prediction of turbine rotors subjected to thermomechanical loads. acta mech autom. 2018;12(3).
- Panettieri E, Fanteria D, Montemurro M. Low-velocity impact tests on carbon/epoxy composite laminates: A benchmark study. Compos B Eng. 2016;107: 9-21.
- Baykan BM, Yolum U, Özaslan E, Güler MA, Yıldırım B. Failure Prediction of Composite Open Hole Tensile Test Specimens Using Bond Based Peridynamic Theory. Procedia Struct Integ. 2020; 28: 2055-2064.
- Hao A, Zhao H, Chen JY. Kenaf/polypropylene nonwoven composites: The influence of manufacturing conditions on mechanical, thermal, and acoustical performance. Compos B Eng. 2013; 54: 44-51.
- Galeta T, Raos P, Stojšić J, Pakši I. Influence of Structure on Mechanical Properties of 3D Printed Objects. Procedia Eng. 2016; 149: 100-104.
- hosravani MR, Rezaei S, Faroughi S, Reinicke T. Experimental and numerical investigations of the fracture in 3D-printed open-hole plates. Theor Appl Fract Mech.2022; 121:103543.
- Zako M, Uetsuji Y, Kurashiki T. Finite element analysis of damaged woven fabric composite materials. Compos Sci Technol. 2003; 63(3):507-516.
- Dixit A, Mali HS. Modeling techniques for predicting the mechanical properties of woven-fabric textile composites: a review. Mech compos Mater. 2013; 49(1): 1-20.
- Eshraghi S, Das S. Micromechanical finite-element modeling and experimental characterization of the compressive mechanical properties of polycaprolactone–hydroxyapatite composite scaffolds prepared by selective laser sintering for bone tissue engineering. Acta biomater. 2012; 8(8): 3138-3143.
- Mohammadi R, Najafabadi MA, Saeedifar M. Correlation of acoustic emission with finite element predicted damages in open-hole tensile laminated composites. Compos B Eng. 2017; 108: 427-435.
- Ghezzo, F, Giannini G, Cesari F, Caligiana G, Numerical and experimental analysis of the interaction between two notches in carbon fibre laminates. Compos Sci Technol. 2008; 68(3): 1057-1072.
- Liao T, Adanur S. A Novel Approach to Three-Dimensional Modeling of Interlaced Fabric Structures. Text Res J. 1998; 68(11): 841-847.
- Bogrekci l, Demircioglu P, Sucuoglu HS,Altun E, Sakar B, Durakbasa MN, Topology Optimization of a Tensiletest Specimen. Int Sci Bk; 2020.
- Khosravani MR. Influences of defects on the performance of adhesively bonded sandwich joints. Key eng mater; 2018.
- Kojnoková T, Nový F, Markovičová L. Evaluation of tensile properties of carbon fiber reinforced polymers produced from commercial prepregs. Mater Today Proc. 2022; 62: 2663-2668.
- Xu P, Yang C, Peng Y, Yao S, Zhang D, Li B. Crash performance and multi-objective optimization of a gradual energy-absorbing structure for subway vehicles. int j mech sci. 2016; 107:1-12.
- Feulvarch E, Lacroix R, Deschanels H, A 3D locking-free XFEM formulation for the von Mises elasto-plastic analysis of cracks. Comput Methods Appl Mech Eng. 2020; 361: 112805.
- Frolov AS, Fedotov IV, Gurovich BA. Evaluation of the true-strength characteristics for isotropic materials using ring tensile test. nucl eng technol. 2021; 53(7): 2323-2333.
- Pilkey WD, Pilkey DF, Bi Z. Peterson’s stress concentration factors;2020.