References
- 1. Guarnieri A, Maglioni C, Molari G. Dynamic analysis of reciprocating single-blade cutter bars. T Asabe. 2007;50(3):755-64.10.13031/2013.23130
- 2. Igathinathane C, Pordesimo LO, Schilling MW, Columbus EP. Fast and simple measurement of cutting energy requirement of plant stalk and prediction model development. Industrial Crops and Products. 2011;33(2):518-23.10.1016/j.indcrop.2010.10.015
- 3. Kruszelnicka W, Kasner R, Baldowska-Witos P, Flizikowski J, Tomporowski A. The Integrated Energy Consumption Index for Energy Biomass Grinding Technology Assessment. Energies. 2020;13(6).10.3390/en13061417
- 4. Persson S, Engineers ASoA. Mechanics of Cutting Plant Material: American Society of Agricultural Engineers; 1987.
- 5. Bochat A, Zastempowski M. Impact of the beater shredder design on the granulometric composition of the shredded grain material. Przem Chem. 2019;98(9):1499-504.
- 6. Zastempowski M, Bochat A. Impact of design and parameters of the drum cutting assembly operation on non-uniformity of biomass length cutting. Przem Chem. 2020;99(3):457-61.
- 7. Zastempowski M, Bochat A. Mathematical Modelling of Elastic Deflection of a Tubular Cross-Section. Pol Marit Res. 2015;22(2):93-100.10.1515/pomr-2015-0022
- 8. Zastempowski M, Bochat A. Gyroscopic Effect in Machine Working Assemblies. Acta Technol Agr. 2020;23(1):24-9.10.2478/ata-2020-0005
- 9. Zastempowski M, Bochat A. Modeling of Cutting Process by the Shear-Finger Cutting Block. Appl Eng Agric. 2014;30(3):347-53.10.13031/aea.30.8806
- 10. Zastempowski M. Dynamics of Movement in Scissor-Finger Cutting Assembly. Engineer Mechan. 2017:1114-7.
- 11. Zastempowski M, Borowski S, Kaszkowiak J. New Solutions in Harvesting Plants for Power Purposes. Trends in Agricultural Engineering 2013. 2013:673-6.
- 12. Zhang M, Sword ML, Buckmaster DR, Cauffman GR. Design and evaluation of a corn silage harvester using shredding and flail cutting. Transactions of the American Society of Agricultural Engineers. 2003;46(6):1503-11.10.13031/2013.15633
- 13. Abilzhanov D, Abilzhanuly T, Golikov V, Adilsheyev A, Alshurina A. Development of universal pick-up chopper for harvesting of chopped hay and haylage. Journal of Engineering and Applied Sciences. 2017;12(13):3309-14.
- 14. Du DD, Wang J. Research on mechanics properties of crop stalks: A review. Int J Agr Biol Eng. 2016;9(6):10-9.
- 15. Bochat A. Theory and construction of cutting units of agricultural machines. In: UTP, editor. UTP University of Science and Technology. Bydgoszcz 2010.
- 16. Zastempowski M. Theory and construction of cutting units of agricultural machines. In: UTP, editor. UTP University of Science and Technology. Bydgoszcz 2017.
- 17. Dmitrewski J. Theory and construction of agricultural machines. State Agricultural and Forest Publishing House, Editor, 1978: Warsaw.
- 18. Zastempowski M, Bochat A. Innovative Constructions of Cutting and Grinding Assemblies of Agricultural Machinery. Proceeding of 6th International Conference on Trends in Agricultural Engineering 2016. 2016:726-35.
- 19. Savoie P, Tremblay D, Theriault R, Wauthy JM, Vigneault C. Forage Chopping Energy Vs Length of Cut. T Asae. 1989;32(2):437-42.10.13031/2013.31022
- 20. Kruszelnicka W, Baldowska-Witos P, Kasner R, Flizikowski J, Tomporowski A, Rudnicki J. Evaluation of emissivity and environmental safety of biomass grinders drive. Przem Chem. 2019;98(9):1494-8.