Simulation Evaluation of the Influence of Selected Geometric Parameters on the Operation of the Pneumatic Braking System of a Trailer with a Differential Valve
References
- 1. Kamiński Z, Kulikowski K. Determination of the functional and service characteristics of the pneumatic system of an agricultural tractor with mechanical brakes using simulation methods. Eksploatacja i Niezawodność - Maintenance and Reliability. 2015;17(3):355–64.10.17531/ein.2015.3.5
- 2. Regulation No 13 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking [Internet]. Official Journal of the European Union. 2015 [cited 2022 Apr 3]. Available from: http://data.europa.eu/eli/reg/2016/194/oj
- 3. Krichel S V, Sawodny O. Dynamic modeling of pneumatic transmission lines in Matlab/Simulink. In: International Conference on Fluid Power and Mechatronics - 17-20 Aug 2011, Beijing, China. Beijing, China: IEEE; 2011. p. 24–9.10.1109/FPM.2011.6045723
- 4. Kulesza Z, Siemieniako F, Mikołajczyk B. Modelowanie zaworu przekaźnikowo-sterującego. Pneumatyka. 2008;1:31–5.
- 5. Kamiński Z. Mathematical modelling of the trailer brake control valve for simulation of the air brake system of farm tractors equipped with hydraulically actuated brakes. Eksploatacja i Niezawodność - Maintenance and Reliability. 2014;16(4):637–43.
- 6. Kulesza Z, Siemieniako F. Modeling the air brake system equipped with the brake and relay valves. Zeszyty Naukowe. 2010;24(96): 5–11.
- 7. Beater P. Pneumatic Drives. System Design, Modelling and Control. Springer; 2007.10.1007/978-3-540-69471-7
- 8. Miatluk M, Avtuszko F. Dinamika pnievmaticeskich i gidravliceskich privodov avtomobilej. M. Maszinostrojenije; 1980. 231 p.
- 9. Szpica D. Modeling of the operation of a pneumatic differential valve increasing the efficiency of pneumatic brake actuation of road trains. In: Transport Means - Proceedings of the International Conference. 2018. p. 151–6.
- 10. Mystkowski A. Zastosowanie zaworów różniczkujących w pneumatycznych układach napędowych. Pneumatyka. 2004;3:21–3.
- 11. Patil JN, Palanivelu S, Jindal AK. Mathematical model of dual brake valve for dynamic characterization. In: SAE Technical Papers. SAE International; 2013.10.4271/2013-26-0150
- 12. Jing Z, He R. Electronic structural improvement and experimental verification of a tractor-semitrailer air brake system. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 2020 Jul 1;234(8):2154–61.10.1177/0954407019899794
- 13. Yang Z, Cheng X, Zheng X, Chen H. Reynolds-Averaged Navier-Stokes Equations Describing Turbulent Flow and Heat Transfer Behavior for Supercritical Fluid. Journal of Thermal Science. 2021;30(1).10.1007/s11630-020-1339-6
- 14. Matyushenko AA, Garbaruk A V. Adjustment of the k-ω SST turbulence model for prediction of airfoil characteristics near stall. In: Journal of Physics: Conference Series. 2016.10.1088/1742-6596/769/1/012082
- 15. Yu W, Yang W, Zhao F. Investigation of internal nozzle flow, spray and combustion characteristics fueled with diesel, gasoline and wide distillation fuel (WDF) based on a piezoelectric injector and a direct injection compression ignition engine. Applied Thermal Engineering. 2017;114.10.1016/j.applthermaleng.2016.12.034
- 16. Michalcová V, Kotrasová K. The numerical diffusion effect on the cfd simulation accuracy of velocity and temperature field for the application of sustainable architecture methodology. Sustainability (Switzerland). 2020;12(23):10173.10.3390/su122310173
- 17. Cvetkovic D, Cosic I, Subic A. Improved performance of the electromagnetic fuel injector solenoid actuator using a modelling approach. International Journal of Applied Electromagnetics and Mechanics. 2008;10.3233/JAE-2008-939
- 18. Szpica D, Mieczkowski G, Borawski A, Leisis V, Diliunas S, Pilkaite T. The computational fluid dynamics (CFD) analysis of the pressure sensor used in pulse-operated low-pressure gas-phase solenoid valve measurements. Sensors. 2021;21(24):8287.10.3390/s21248287870704734960381
- 19. Subramanian SC, Darbha S, Rajagopal KR. Modeling the pneumatic subsystem of an s-cam air brake system. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME. 2004;126(1):36–46.10.1115/1.1666893
- 20. Kumar EA, Gautam V, Subramanian SC. Performance evaluation of an electro-pneumatic braking system for commercial vehicles. In: ICPCES 2012 - 2012 2nd International Conference on Power, Control and Embedded Systems. 2012.10.1109/ICPCES.2012.6508102
- 21. Afshari A, Specchia S, Shabana AA, Caldwell N. A train air brake force model: Car control unit and numerical results. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 2013;227(1):38–55.10.1177/0954409712447231
- 22. Aboubakr AK, Volpi M, Shabana AA, Cheli F, Melzi S. Implementation of electronically controlled pneumatic brake formulation in longitudinal train dynamics algorithms. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics. 2016;230(4):505–26.10.1177/1464419316628764
- 23. Kamiński Z. A simplified lumped parameter model for pneumatic tubes. Mathematical and Computer Modelling of Dynamical Systems. 2017;23(5):523–35.10.1080/13873954.2017.1280512
- 24. Iwaszko J. Wymiana ciepła podczas opróżniania zbiornika. Zeszyty Naukowe Politechniki Łódzkiej, Cieplne Maszyny Przepływowe. 1988;93:12–21.
- 25. Grymek S, Kiczkowiak T. Conversion of the sonic conductance C and the critical pressure ratio b into the airflow coefficient μ. Journal of Mechanical Science and Technology. 2005;19(9):1706–10.10.1007/BF02984182
- 26. Yang WY, Cao W, Chung T-S, Morris J. Applied Numerical Methods Using MATLAB®. Applied Numerical Methods Using MATLAB®. Wiley & Sons; 2020. 1–502 p.
- 27. Shamdani AH, Shameki AH, Basharhagh MZ, Aghanajafi S. Modeling and simulation of a diesel engine common rail injector in Matlab/Simulink. In: 14 th Annual (International) Mechanical Engineering Conference – May 2006 Isfahan University of Technology, Isfahan, Iran. 2006. p. 7.
- 28. Demarchi A, Farçoni L, Pinto A, Lang R, Romero R, Silva I. Modelling a solenoid’s valve movement. In: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). 2018.10.1007/978-3-030-00308-1_24
- 29. Kamiński Z. Experimental and numerical studies of mechanical subsystem for simulation of agricultural trailer air braking systems. International Journal of Heavy Vehicle Systems. 2013;20(4):289–311.10.1504/IJHVS.2013.056802
- 30. Czaban J, Kamiński Z. Diagnosing of the agricultural tractor braking system within approval tests. Eksploatacja i Niezawodność - Maintenance and Reliability. 2012;14(4):319–26.
- 31. Hung NB, Lim O, Yoon S. Effects of Structural Parameters on Operating Characteristics of a Solenoid Injector. In: Energy Procedia. 2017. p. 1771 – 1775.10.1016/j.egypro.2017.03.511
- 32. Plavec E, Ladisic I, Vidovic M. The impact of coil winding angle on the force of DC solenoid electromagnetic actuator. Advances in Electrical and Electronic Engineering. 2019;17(3):244–50.10.15598/aeee.v17i3.3338
- 33. Mieczkowski G, Szpica D, Borawski A, Diliunas S, Pilkaite T, Leisis V. Application of smart materials in the actuation system of a gas injector. Materials. 2021;14(22):6984.10.3390/ma14226984862196534832384
- 34. Mieczkowski G. Static electromechanical characteristics of piezoelectric converters with various thickness and length of piezoelectric layers. Acta Mechanica et Automatica. 2019;13(1):30–6.10.2478/ama-2019-0005
- 35. Liu Y. Modeling abstractions of vehicle suspension systems supporting the rigid body analysis. International Journal of Vehicle Structures and Systems. 2010;2(3–4):117–26.10.4273/ijvss.2.3-4.05
- 36. Liu Y. Constructing equations of motion for a vehicle rigid body model. SAE International Journal of Passenger Cars - Electronic and Electrical Systems. 2009;1(1):1289–97.10.4271/2008-01-2751
Language: English
Page range: 233 - 241
Submitted on: Apr 10, 2022
Accepted on: Jun 10, 2022
Published on: Jul 1, 2022
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2022 Dariusz Szpica, Marcin Kisiel, Jarosław Czaban, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.