Experimental Research of Paperboard Cutting in Die Cutting Press with the Screw–Nut Transmission of Drive Mechanism of a Movable Pressure Plate
References
- 1. Behen P. I., Radikhovskyi I. A., Mlynko O. I. (2020), Die-cutting Press wit Using a Lead Screw Transmission (Investigation of Pressure Plate Kinematic Parameters), Upakovka, 2020. № 1, 44–45 (in Ukrainian).
- 2. Durand C., Bigot R., Baudouin C. (2018), Contribution to characterization of metal forming machines: application to screw presses, Procedia Manufacturing, Volume 15, 1024-1032.10.1016/j.promfg.2018.07.391
- 3. Emblem A., Emblem H. (2012), Packaging technology Fundamentals, Materials and Processes, Oxford: Woodhead Publishing.10.1533/9780857095701
- 4. Gorvat A. A., Molnar O. O., Minkovich V.V. (2019), Metodiobrobkieksperimentalnikhdanikh z vikoristannyam MS Excel. VidavnicztvoUzhNU «Goverla» (in Ukrainian).
- 5. Happonen, A., Stepanov A., Piili H., Salminen A. (2015), Innovation Study for Laser Cutting of Complex Geometries with Paper Materials, Physics Procedia, № 78, 128–137.10.1016/j.phpro.2015.11.025
- 6. Hilal Muftah M., Mohamed Haris S., Petroczki K., AwadKhidir E. (2013) An Improved Strain Gauge-Based Dynamic Torque Measurement Method. International Journal of Circuits, Systems and Signal Processing, Issue 1, Volume 7, 66-73.
- 7. Khvedchyn YU. Y., Zelenyi V. V. (2014) Analysis of The Mechanisms of Press in Die-cutting Automat, Scientific Papers, № 4 (49), 21-30 (in Ukrainian).
- 8. Kirwan, M. J. (2013), Handbook of Paper and Paperboard Packaging Technology, Oxford: John Wiley & Sons.10.1002/9781118470930
- 9. Knysh, O., Rehei, I., Kandiak, N., Ternytskyi, S. (2019), Experimental Evaluation of the Tractive Effort of the Chain Conveyor during Book Block Spine Processing by Cylindrical Milling Cutter at Perfect Binding, Acta Mechanica et Automatica, vol. 13 no. 2, 101–106.
- 10. Kuznetsov V. O., Kolomiets A. B., Dmitraschuk V. S. (2012), Parametric Researches of the Press Plate Drive in Die-cutting Automat, Upakovka, №6, 31-34 (in Ukrainian).
- 11. Kuznetsov V. O., Rehei I. I., Vlakh V. V. (2017), Modification of a Drive Mechanism of a Press Plate in a Die-cutting, Press, Printing and Publishing, №1, 56–62 (in Ukrainian).
- 12. Lin W., Zhou C., Huang W. (2015), Optimum design for mechanical Structures and material Properties of the dual-elbow-bar mechanism, Hindawi Advances in Materials Science and Engineering.10.1155/2015/724171
- 13. Liu Y., Wang J., Cheng H., Sun Y. (2015), Kinematics Analysis of the Roller Screw Based on the Accuracy of Meshing Point Calculation, Mathematical Problems in Engineering, vol. 2015.
- 14. Pinćjer I., Miketić N., Tomić I., Adamović S. (2020). Exploring the Various Parameters of CO2 Laser in the Cutting of Paper. Paper presented at the 10th International Symposium on Graphic Engineeringand Design GRID 2020, Novi Sad, Serbia, November 12–14.10.24867/GRID-2020-p28
- 15. Rehei І.І., Knysh O. B., Behen P. I., Radikhovsky I. A., Mlynko O. I. (2020). Drive of The Pressure Plate of the Die-cutting Press on The Basis of Using the Screw Nut Transmission (Method of Evaluation of Consumption Power Components), Scientific Papers 1 (60), 98–107 (in Ukrainian).10.32403/1998-6912-2020-1-60-98-107
- 16. Rehei, І. (2011), Consumer Cardboard Packaging: Materials, Materials, Design, Manufacturing Equipment, Lviv: Ukrainian Academy of Printing (in Ukrainian).
- 17. Schicher R., Wegener G. (2002). Measuring Torque Correctly, Hottinger Baldwin MesstechnikGmbh, Germany.
- 18. Shakhbazov J., Cheterbukh O., Shyrokov V., Palamar O. (2020). The Drive Mechanism of a Pressure Plate of a Flat Die-cutting Press, Printing and Publishing, 1 (79),112–120(in Ukrainian).10.32403/0554-4866-2020-1-79-112-120
- 19. Vlakh V., Pasika V. (2016), Automated Synthesis of Mechanism of Press of Diecutting Machine, Technological Complexes, №1 (13), 57-63 (in Ukrainian).
- 20. Zou C., Zhang H., Lu D., Zhang J., Zhao W. (2017), Effect of the screw–nut joint stiffness on the position-dependent dynamics of a vertical ball screw feed system without counterweight, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical EngineeringScience. 232.
Language: English
Page range: 122 - 131
Submitted on: Feb 14, 2021
Accepted on: Jun 25, 2021
Published on: Sep 27, 2021
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 times per year
Keywords:
Related subjects:
© 2021 Serhii Ternytskyi, Ivan Rehei, Nazar Kandiak, Ihor Radikhovskyi, Oksana Mlynko, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.