References
- 1. Bansal A., Ramaswamy A. (2002), FE analysis of piezo-laminate composites under thermal loads, J. Intell. Mater. Syst. Struct., 13, 291–301.
- 2. Beheshti-Aval S.B., Lezgy-Nazargah M., Vidal P., Polit O. (2011), A Refined Sinus Finite Element Model for the Analysis of Piezoelectric-Laminated Beams, A Refined Sinus Finite Element Model for the Analysis of Piezoelectric-Laminated Beams, J. Intell. Mater. Syst. Struct., 22, 203–219, https://doi.org/10.1177/1045389X10396955.10.1177/1045389X10396955
- 3. Bendine K., Boukhoulda F.B., Nouari M., Satla Z. (2016), Active vibration control of functionally graded beams with piezoelectric layers based on higher order shear deformation theory, Earthq. Eng. Eng. Vib., 15, 611–620.
- 4. Benjeddou A., Andrianarison O. (2005), A thermopiezoelectric mixed variational theorem for smart multilayered composites, Comput. Struct., 83, 1266–1276.
- 5. Birman V. (1996), Thermal effects on measurements of dynamic processes in composite structures using piezoelectric sensors, Smart Mater. Struct., 5, 379, https://doi.org/10.1088/0964-1726/5/4/001.10.1088/0964-1726/5/4/001
- 6. Chandrashekhara K., Tenneti R. (1995), Thermally induced vibration suppression of laminated plates with piezoelectric sensors and actuators, Smart Mater. Struct., 4, 281. https://doi.org/10.1088/0964-1726/4/4/008.10.1088/0964-1726/4/4/008
- 7. Chattopadhyay A., Li J., Gu H. (1999), Coupled Thermo-Piezoelectric-Mechanical Model for Smart Composite Laminates, AIAA J., 37, 1633–1638, https://doi.org/10.2514/2.645.10.2514/2.645
- 8. Clark W.W. (1999), Semi-active vibration control with piezoelectric materials as variable-stiffness actuators, Smart Structures and Materials: Passive Damping and Isolation, International Society for Optics and Photonics, 123–130.10.1117/12.349775
- 9. Crawley E.F., De Luis J. (1987), Use of piezoelectric actuators as elements of intelligent structures, AIAA J., 25, 1373–1385.
- 10. Elshafei M.A., Alraiess F. (2013), Modeling and analysis of smart piezoelectric beams using simple higher order shear deformation theory, Smart Mater. Struct., 22, 035006.
- 11. Gay D., Hoa S.V. (2007), Composite Materials : Design and Applications, Second Edition, CRC Press.10.1201/9781420045208
- 12. Gupta V., Sharma M., Thakur N., Singh S.P. (2011), Active vibration control of a smart plate using a piezoelectric sensor–actuator pair at elevated temperatures, Smart Mater. Struct., 20, 105023. https://doi.org/10.1088/0964-1726/13/1/004https://doi.org/10.1115/1.3167719https://doi.org/10.1201/9781420045208
- 13. Jiang J.P., Li D.X. (2007), A new finite element model for piezothermoelastic composite beam, J. Sound Vib., 306, 849–864.
- 14. Johnson C.D. (1995), Design of Passive Damping Systems, J. Mech. Des., 117, 171–176, https://doi.org/10.1115/1.2836451.10.1115/1.2836451
- 15. Kargarnovin M.H., Najafizadeh M.M., Viliani N.S. (2007), Vibration control of a functionally graded material plate patched with piezoelectric actuators and sensors under a constant electric charge, Smart Mater. Struct., 16, 1252.
- 16. Lam K.Y., Peng X.Q., Liu G.R., Reddy J.N. (1997), A finite-element model for piezoelectric composite laminates, Smart Mater. Struct., 6, 583.
- 17. Lee H.-J., Saravanos D.A. (1996), Coupled layerwise analysis of thermopiezoelectric composite beams, AIAA J., 34, 1231–1237.
- 18. Lee H.-J., Saravanos D.A. (1998), The effect of temperature dependent material properties on the response of piezoelectric composite materials, J. Intell. Mater. Syst. Struct., 9, 503–508.
- 19. Liew K.M., He X.Q., Ng T.Y., Sivashanker S. (2001), Active control of FGM plates subjected to a temperature gradient: modelling via finite element method based on FSDT, Int. J. Numer. Methods Eng., 52, 1253–1271.
- 20. Peng X.Q., Lam K.Y., Liu G.R. (1998), Active vibration control of composite beams with piezoelectrics: a finite element model with third order theory., J. Sound Vib., 209, 635–650.10.1006/jsvi.1997.1249
- 21. Qiu J., Ji H., Zhu K. (2009), Semi-active vibration control using piezoelectric actuators in smart structures, Front. Mech. Eng. China, 4, 242–251.
- 22. Raja S., Sinha P.K., Prathap G., Dwarakanathan D. (2004), Thermally induced vibration control of composite plates and shells with piezoelectric active damping, Smart Mater. Struct., 13, 939.
- 23. Reddy J.N. (1984), A Simple Higher-Order Theory for Laminated Composite Plates, J. Appl. Mech., 51, 745–752.
- 24. Sharma A., Kumar R., Vaish R., Chauhan V.S. (2016), Experimental and numerical investigation of active vibration control over wide range of operating temperature, J. Intell. Mater. Syst. Struct., 27, 1846–1860.
- 25. Song, G., Zhou, X., Binienda, W. (2004), Thermal deformation compensation of a composite beam using piezoelectric actuators, Smart Mater. Struct., 13, 30.
- 26. Tzou H.S., Bao Y. (1995), A theory on anisotropic piezothermoelastic shell laminates with sensor/actuator applications, J. Sound Vib., 184, 453–473.
- 27. Tzou H.S., Gadre M. (1989), Theoretical analysis of a multi-layered thin shell coupled with piezoelectric shell actuators for distributed vibration controls, J. Sound Vib., 132, 433–450.
- 28. Tzou H.S., Tseng C.I. (1990), Distributed piezoelectric sensor/actuator design for dynamic measurement/control of distributed parameter systems: a piezoelectric finite element approach, J. Sound Vib., 138, 17–34.
- 29. Wang D., Fotinich Y., Carman G.P. (1998), Influence of temperature on the electromechanical and fatigue behavior of piezoelectric ceramics, J. Appl. Phys., 83, 5342, https://doi.org/10.1063/1.367362.10.1063/1.367362
- 30. Ye Z.-G. (2008), Handbook of advanced dielectric, piezoelectric and ferroelectric materials: Synthesis, properties and applications, Elsevier.10.1201/9781439832882
- 31. Zhou X., Chattopadhyay A., Gu H. (2000), Dynamic responses of smart composites using a coupled thermo-piezoelectric-mechanical model, AIAA J., 38, 1939–1948.
- 32. Zorić N.D., Simonović A.M., Mitrović Z.S., Stupar S.N. (2013), Optimal vibration control of smart composite beams with optimal size and location of piezoelectric sensing and actuation, J. Intell. Mater. Syst. Struct., 24, 499–526.
- 33. Zou Y., Tong L., Steven G.P. (2000), Vibration-based model-dependent damage (delamination) identification and health monitoring for composite structures — a review, J. Sound Vib., 230, 357–378, https://doi.org/10.1006/jsvi.1999.2624.10.1006/jsvi.1999.2624