References
- 1. BASF (2010), Thermoplastic Polyurethane Elastomers, Elastollan® - Material Properties, BASF.
- 2. Behabelt (2015), Product Catalogue 2015/2016, Behabelt, Glottertal.
- 3. Berdychowski M., Malujda I., Wałęsa K., Fierek A. (2020), Analysis of angular deflection of bearing node in machine with toothed transport belt, IOP Conference Series: Materials Science and Engineering, 776, 012019.10.1088/1757-899X/776/1/012019
- 4. Breco (2011), Brecoflex flat belts – Product Catalogue, Breco, Porta Westfalica.
- 5. Broniewicz T., Iwasiewicz A., Kapko J., Płaczek W. (1970) Methods of researches and examination of plastics properties (in Polish), WNT, Warszawa.
- 6. Chao-Lieh Yang, Shey-Huei Sheu, Kun-Tzu Yu, (2009) The reliability analysis of a thin-edge blade wear in the glass fiber cutting process, Journal of Materials Processing Technology, 209, 1789-1795.10.1016/j.jmatprotec.2008.04.028
- 7. Ciszewski A., Radomski T. (1989), Constructuion materials in machine design (in Polish), PWN, Warszawa.
- 8. Continental, (2020), Continental products catalogue, In: https://www.contitech.de (Access date: 06.04.2020).
- 9. Domek G., Dudziak M. (2011), Energy Dissipation in Timing Belts Made From Composite Materials, Advanced Material Research, Vol. 189-193, 4414-4418.
- 10. Fierek A., Malujda I., Talaśka K. (2019), Design of a mechatronic unit for applications of coats of adhesive, MATEC Web of Conferences, 254, 01019.10.1051/matecconf/201925401019
- 11. Górecki J. (2020), Preliminary analysis of the sensitivity of the algebraic dry ice agglomeration model using multi-channel dies to change their geometrical parameters, IOP Conference Series: Materials Science and Engineering, 776, 012030.10.1088/1757-899X/776/1/012030
- 12. Górecki J., Fierek, A., Talaśka K., Wałęsa K. (2020), The influence of the limit stress value on the sublimation rate during the dry ice densification process, IOP Conference Series: Materials Science and Engineering, 776, 012072.10.1088/1757-899X/776/1/012072
- 13. Górecki J., Malujda I., Talaśka K. (2016), Investigation of internal friction of agglomerated dry ice, Procedia Engineering, 136, 275-279.10.1016/j.proeng.2016.01.210
- 14. Górecki J., Talaśka K., Wałęsa K., Wilczyński D., Wojtkowiak D. (2020), Mathematical model describing the influence of geometrical parameters of multichannel dies on the limit force of dry ice extrusion process, Materials, 13(15), 3317.10.3390/ma13153317743538932722478
- 15. Groover M. P. (2015), Fundamentals of modern manufacturing, Willey, 503-510.
- 16. Hiwin (2012), HIWIN Kompakt – linear guides – product catalogue, Hiwin GmbH, Offenburg.
- 17. Klimpel A. (2000), Welding of termoplastics materials (in Polish), Wydawnictwo Politechniki Śląskiej, Gliwice.
- 18. Krawiec P., Domek G. (2019), Transmissions with V-belts (in Polish), Wydawnictwo Politechniki Poznańskiej, Poznań.
- 19. Madej M., Ozimina D. (2010), Plastics and composite materials (in Polish), Wydawnictwo Politechniki Świętokrzyskiej, Kielce.
- 20. Marciniak Z. (1959), Punching dies construction (in Polish), WNT, Warszawa, 299-302.
- 21. Osiński Z. (2007), Basics of machine design (in Polish), PWN, Warszawa, 157-163.
- 22. Puszka A. (2006), Polyurethanes – sources, properties and modifications (in Polish), Zakład Chemii Polimerów, Wydział Chemii Uniwersytetu Marii Curie Skłodowskiej w Lublinie, Lublin.
- 23. Sikora R. (1993), Polymers processing (in Polish), Wydawnictwo ŻAK, Warszawa.
- 24. Soares, V. M., Pereira, J. G., Zanette, C. M., Nero L.A., Pinto J.P., Barcellos J.P., Bersot L.S. (2014) Cleaning Conveyor Belts in the Chicken-Cutting Area of a Poultry Processing Plant with 45 degrees C Water, Journal of Food Protection, 77(3), 496-498.10.4315/0362-028X.JFP-13-34024674444
- 25. Talaśka K., Wojtkowiak D. (2018), Modelling mechanical properties of the multilayer composite materials with the polyamide core, MATEC Web of Conferences, 157, 02052.10.1051/matecconf/201815702052
- 26. Wałęsa K., Malujda I., Górecki J. (2020), Experimental research of the mechanical properties of the round drive belts made of thermo-plastic elastomer, IOP Conference Series: Materials Science and Engineering, 776, 012107.10.1088/1757-899X/776/1/012107
- 27. Wałęsa K., Malujda I., Talaśka K., Wilczyński D. (2020), Process analysis of the hot plate welding of drive belts, Acta Mechanica et Automatica, 14(2), 84-90.10.2478/ama-2020-0012
- 28. Wałęsa K., Malujda I., Wilczyński D. (2019), Shaping the parameters of cylindrical belt surface in the joint area, Acta Mechanica et Automatica, 13(4), 255-261.10.2478/ama-2019-0035
- 29. Wałęsa K., Malujda I., Wilczyński D. (2020), Experimental research of the thermoplastic belt plasticizing process in the hot plate welding, IOP Conference Series: Materials Science and Engineering, 776, 012011.10.1088/1757-899X/776/1/012011
- 30. Wanqing L., Changqing F., Xing Z., Youliang C., Rong Y., Donghong L. (2017), Morphology and thermal properties of polyurethane elastomer based on representative structural chain extenders, Thermochimica Acta, 653, 116–125.10.1016/j.tca.2017.04.008
- 31. Wilczyński D., Malujda M., Górecki J., Domek G. (2019), Experimental research on the process of cutting transport belts, MATEC Web of Conferences, 254, 05014.10.1051/matecconf/201925405014
- 32. Wilhelm Herm. Müller, (2020), Nitta Industries – Product Catalogue (in Polish), In: www.whm.pl (Access date: 06.04.2020).
- 33. Wojtkowiak D., Talaśka K. (2019), Determination of the effective geometrical features of the piercing punch for polymer composite belts, The International Journal of Advanced Manufacturing Technology, 104(1-4), 315-332.10.1007/s00170-019-03746-7
- 34. Wojtkowiak D., Talaśka K., Malujda I., Domek G. (2017), Vacuum conveyor belts perforation – methods, materials and problems, Mechanik, 90(12), 1138-1142.10.17814/mechanik.2017.12.192
- 35. Wojtkowiak D., Talaśka K., Malujda I., Domek G. (2018), Analysis of the influence of the cutting edge geometry on parameters of the perforation process for conveyor and transmission belts, MATEC Web of Conferences, 157, 01022.10.1051/matecconf/201815701022
- 36. Wojtkowiak D., Talaśka K., Malujda I., Domek G. (2018), Estimation of the perforation force for polymer composite conveyor belts taking into consideration the shape of the piercing punch, The International Journal of Advanced Manufacturing Technology, 98(9-12), 2539-2561.10.1007/s00170-018-2381-3
- 37. Żuchowska D. (2000), Construction polymers (in Polish), WNT, Warszawa.