References
- 1. Babak A., Barsoum M.W. (2016). Energy damping in magnesium alloy composites reinforced with TiC or Ti2AlC particles, Materials Science & Engineering, A 653, 53–62.
- 2. Babak A., Casi E.N., Barsoum M.W. (2014), Fabrication and mechanical properties of pressureless melt infiltrated magnesium alloy composites reinforced with TiC and Ti2AlC particles, Materials Science and Engineering, 618, 511–522.
- 3. Baskaran S., Anandakrishnan V, Muthukannan Duraisel Vam, Keerthivasan N. (2015) Study on dry sliding friction behaviour of tic reinforced AA7075 in-situ composites by Taguchi analysis, International Journal of Mechanical And Production Engineering, 3(3), 9–12.
- 4. Bin C., Ye-fa T., Long H., Hua T., Li G. (2013), Tribological properties of TiC particles reinforced Ni-based alloy composite coatings, Transactions of Nonferrous Metals Society of China, 23(6), 1681–1688.
- 5. Cherepova T.S., Dmitrieva G.P. (2016a) The Wear Features of Powder Cobalt Alloys Strengthened with Titanium Carbide, Powder Metallurgy and Metal Ceramics, 55(5-6), 374–378.
- 6. Cherepova T.S., Dmitrieva G.P., Nosenko A.V., Semirga A.M. (2014) Wear-resistant alloy for protection of contact surfaces of working aircraft engine blades from oxidation at high temperatures, Science and Innovation, 10(4), 20–28.
- 7. Cherepova T.S., Dmytrieva H.P. (2016b) Properties of titanium carbide-strenghtened cobalt-based sintered alloys, Metal Physics and Advanced Technologies, 38(11), 1497–1512 (in Ukrainian).
- 8. Cherepova T.S., Dmytrieva H.P., Hosenko V.K. (2015) Heat resistance of cast and sintered alloys based on nickel and cobalt strengthened with carbides, Metallurgy and Heat Treatment of Metals, 3, 36–40 (in Ukrainian).
- 9. Cherepova, T.S., Dmitrieva, G.P., Nosenko, V.K. (2016a). Heat resistance of the powder cobalt alloys reinforced with niobium or titanium carbide, Science and Innovation, 12(1), 5–10.
- 10. Cherepova, T.S., Dmytrieva, H.P., Dukhota, O.I., Kindrachuk, M.V. (2016b) Properties of nickel powder alloys hardened with titanium carbide, Materials Science, 52(2), 173–179.
- 11. Chinmaya K.S., Manoj M. (2015). Effect of pulse laser parameters on TiC reinforced AISI 304 stainless steel composite coating by laser surface engineering process, Optics and Lasers in Engineering, 67, 36–48.
- 12. Chukwuma C., Onuoha X., Chenxin J., Zoheir N.F., Georges J.K., Kevin P.P. (2016). The effects of TiC grain size and steel binder content on the reciprocating wear behaviour of TiC-316L stainless steel cermets wear, Wear, 350-351, 116–129.
- 13. Dmitrieva G.P., Cherepova T.S., Kosorukova T.A., Nichiporenko V.I. (2015) Structure and properties of wear resistant cobalt-based alloy with niobium carbide, Metal Physics and Advanced Technologies, 37(7), 973–986 (in Russian).
- 14. Dmytrieva H.P., Cherepova T.S., Dukhota O.I., Nychyporenko V.I. (2017), Investigation of properties of sintered alloys based on ZhS32-VI with titanium carbide, Powder Metallurgy, 11/12, 68–75 (in Ukrainian).
- 15. Dukhota O.I., Tisov O.V. (2010), The study on wear resistance of heat resistant composite alloys in conditions of high temperature fret-ting-wear, Problems of friction and wear, 53, 195–200 (in Ukrainian).
- 16. Dukhota O.I., Tisov O.V., Cherepova T.S., Dmytrieva H.P., Kharchenko V.V. (2017), Tribotechnical examinations of high temperature wear resistant particle-reinforced alloys, Problems of friction and wear, 3(76), 60–66 (in Ukrainian).
- 17. Jung S.-A., Kwon H., Suh C.-Y., Oh J.-M., Kim W. (2015). Preparation of a fine-structured TiC–Co composite by high-energy milling and subsequent heat treatment of a Ti–Co alloy, Ceramics International, 41(10), 14326–14331.
- 18. Karantzalis A.E., Lekatou A., Evaggelidou M. (2013), Micro-structure and sliding wear assessment of Co–TiC composite materials, International Journal of Cast Metals Research, 27(2), 73–79.
- 19. Levashov E.A., Mishina E.S., Malochkin O.V., Stanskii D.V., Mour J.J., Fadeev M. I. (2003). Effect of nanocrystalline powders on the structure and properties of dispersion-hardened alloy TiC – 40% KhN70Yu, Metallurgist, 47(3/4), 133–139.
- 20. Lieontiev V.A., Zilichihis S.D., Kondratiuk Ye.V., Zamkovoi V.Ye. (2006). Recovery of workability of GTE using new technologies and materials, Herald of Engine Constructing, 4, 99–103 (in Russian).
- 21. Ouyang T., Wu J., Yasir M., Zhou T., Fang X., Wang Y., Liu D., Suo J. (2016), Effect of TiC self-healing coatings on the cyclic oxidation resistance and lifetime of thermal barrier coatings, Journal of Alloys and Compounds, 656, 992–1003
- 22. Sakamoto T., Kurishita H., Matsuo S., Arakawa H, Takahashi S, Tsuchida M., Kobayashi S., Nakai K,. Terasawa M., Yamasaki T., Kawai M. (2015) Development of nanostructured SUS316L-2%TiC with superior tensile properties, Journal of Nuclear Materials, 466, 468–476.
- 23. Shuster L.S., Mamleyev R.F., Kamaletdinova R.R., Chertovskikh S.V., Kireev R.M. (2016). Wear of friction pairs made of titanium carbide-based metal–ceramic material, Journal of Friction and Wear, 37(2), 165–169.
- 24. Sun-A.J., Hanjung K., Chang-Yul S., Jung-Min O., Wonbaek K. (2015), Preparation of a fine-structured TiC–Co composite by high-energy milling and subsequent heat treatment of a Ti–Co alloy, Ceramics International, 41, 14326–14331.
- 25. Takahashi S., Ikeno S., Imai E. (1981). Differential thermal analysis and structure of the Ni-TiC system, Journal of Materials Science, 16(12), 3418–3426.
- 26. Tretiachenko G.N., Kravchuk G.N., Kuriat R.I., Voloshchenko A.P. (1975) Bearing capacity of gas turbines blades at nonstationary haet and force effect, Кyiv.: Naukova Dumka (in Russian).
- 27. Volkova N. M., Dudorova T. A., Gurevich Y. G. (1989). Influence of hold time on carbide grain growth in TiC-Ni alloys, Soviet Powder Metallurgy and Metal Ceramics, 28(8), 613–617.
- 28. Wei Z.(2012). Research on Microstructure and Property of TiC-Co Composite Material Made by Laser Cladding, Physics Procedia, 25, 205–208.
- 29. Yuxin Li, Peikang Bai, Yaomin Wang, Jiandong Hu, Zuoxing Guo (2009). Effect of TiC content on Ni/TiC composites by direct laser fabrication, Materials & Design, Vol. 30, Iss. 4. 1409–1412.
- 30. Zhang X.-H., Han J.-C., Du S.-Y., Wood J.V. (2000). Microstructure and mechanical properties of TiC-Ni functionally graded materials by simultaneous combustion synthesis and compaction, Journal of Materials Science, 35(8), 1925–1930.
- 31. Zohari S., Sadeghian Z., Lotfi B., Broeckmann C. (2015). Application of spark plasma sintering (SPS) for the fabrication of in situ Ni–TiC nanocomposite clad layer, Journal of Alloys and Compounds, 633, 479–483.