References
- 1. Åkerblom M., Sellgren U. (2008), Gearbox noise and vibration − influence of bearing preload, TRITA-MMK 2008:17.
- 2. Dogruer C.U., Pirsoltan A.K. (2017), Active vibration control of a single-stage spur gearbox, Mechanical Systems and Signal Processing, 85, 429–444.
- 3. Feng Z., Zuo M.J. (2012), Vibration signal models for fault diagnosis of planetary gearboxes, Journal of Sound and Vibration, 331, 4919–4939.
- 4. Figlus T., Wilk A., Madej H. (2010). A study of the influence of ribs shape on the gear transmission housing vibroactivity, Transport Problems, 5 (1), 63–69.
- 5. Grega R., Krajňák J., Žuľová L., Fedorko G., Molnár V. (2017), Failure analysis of driveshaft of truck body caused by vibrations, Engineering Failure Analysis, 79, 208–215.
- 6. Grega R., Homišin J., Krajňak J., Urbanský M. (2016), Analysis of the impact of flexible couplings on gearbox vibrations, Scientific Journal of Silesian University of Technology, Series Transport., 91, 43–50.
- 7. Kaczynski R., Hoscilo B. (2017): Mechanical and friction characteristics of the coating surface of the cutting tool on the basis of instrumental measurements micro-hardness and scratch-test, Friction and Wear, 38(2), 92–100.
- 8. Kaczyński R., Wilczewska I., Hościło B., (2012), Construction analysis of mini-generator of electric energy using working medium flow as the working environment, Key Engineering Materials, 490, 45–53.
- 9. łazarz B. (2001), Identified dynamic model of the gearbox as the basis for design (in Polish), Wydawnictwo i Zakład Poligrafii Instytutu Technologii Eksploatacji, Katowice-Radom.
- 10. łazarz B., Peruń G. (2012), Influence of construction factors on the vibrational activity of the gearing, Transport Problems, 7(2), 95–102.
- 11. Li H., Le M.D, Gong Z.M, Lin W. (2009), Motion profile design to reduce redidual vibration of high-speed positioning stages, IEEE/ASME Transactions on Mechatronics, 14(2), 264–269.
- 12. Liang X., Zuo M.J., Feng Z. (2018), Dynamic modeling of gearbox faults: A review, Mechanical Systems and Signal Processing, 98, 852–876.
- 13. Madej H. (2003), Minimization of vibroacoustic activity of gearboxes hausings (in Polish), Wydawnictwo i Zakład Poligrafii Instytutu Technologii Eksploatacji, Katowice-Radom.
- 14. Müller L. (1996), Gearboxes – design (in Polish), Wydawnictwa Naukowo-Techniczne, Warszawa.
- 15. Peng Y., Zhao N., Qiu P., Zhang M., Li W., Zhou R. (2018), An efficient model of load distribution for helical gears with modification and misalignment, Mechanism and Machine Theory, 121, 151–168.
- 16. Razpotnik M., Bischof T., Boltežar M. (2015), The influence of bearing stiffness on the vibration properties of statically overdetermined gearboxes, Journal of Sound and Vibration, 351, 221–235.
- 17. Sawalhi N., Randall R.B. (2014), Gear parameter identification in a windturbine gearbox using vibration signals, Mechanical Systems and Signal Processing, 42, 368–376.
- 18. Shan J., Liu H.T., Sun D. (2005), Slewing and vibration control of a single-link flexible manipulator by positive position feedback (PPF), Mechatronics, 15 (4), 487–503.
- 19. Shen A., Randall R.B. (2008), Optimal rib stiffening for noise reduction of constant speed gearboxes, 15th International Congress on Sound and Vibration, Korea, Daejeon, 2008.
- 20. Strassberger M., Waller H. (2000), Active noise reduction by structural control using piezo-electric actuators, Mechatronics, 10(8), 851–868.
- 21. Wang T., Chu F. Han Q., Kong Y. (2017), Compound faults detection in gearbox via ameshing resonance, Journal of Sound and Vibration, 392, 367–381.
- 22. Wieczorek A. (2010), The role of lubrication in reducing noise associated with the operation of gearboxes (in Polish), Mechanizacja i Automatyzacja Górnictwa, 478 (12), 34–39.
- 23. Wieczorek A., Kruk R. (2016), Minimization of vibroacoustic effects as a criterion for operation of gear transmissions in accordance with sustainable development principles, Management Systems in Production Engineering, 12 (1), 12–19.
- 24. Wilk A., Łazarz B., Madej H. (2009), Vibroactivity of gear transmissions. The influence of constructional features and wear of elements on the vibroactivity of drive systems with gear transmissions (in Polish), Wydawnictwo Naukowe Instytut Technlogii Eksploatacji, Katowice-Radom.
- 25. Wojnar G. (2010), Minimization of dynamic forces in gear meshing by selection of the flexible couplings parameters, Journal of Kones. Powertrain and Transport, 17 (3), 497–504.
- 26. Wojnar G., Homik W. (2015), Reduction of the amplitudes of selected components of the frequency spectrum of momentary velocity of the crankshaft of the internal combustion engine piston through the use of torsional vibration dampers, JVE International Conference, Katowice, Poland, October 14-15th, Vibroengineering Procedia 1, 6, 83–87.
- 27. Zhou L., Duan F., Corsar M. Elasha F., Mba D. (2017), A study on helicopter main gearbox planetary bearing fault diagnosis, Applied Acoustics, 127, 213-221.
- 28. Žuľová L., Grega R., Krajňák J., Fedorko G., Molnár V. (2017), Optimization of noisiness of mechanical system by using a pneumatic tuner during a failure of piston machine, Engineering Failure Analysis, 79, 845–851.