References
- 1. Abaqus 6.12. Getting Started with Abaqus, Interactive Edition.
- 2. Anderson T.L. (2008), Fracture Mechanics, Taylor and Francis Group.
- 3. ASTM E1820-09. (2011), Standard Test Method for Measurement of Fracture Toughness. Annual Book of ASTM Standards, 03.01, 1070–1118.
- 4. Beremin F.M. (1983), A local criterion for cleavage fracture of a nuclear pressure vessel steel, Metallurgical Transaction A, 14A, 2277–2287.
- 5. Boumerzoug Z., Derfouf Ch., Baudin T. (2010), Effect of welding on microstructure and mechanical properties of an industrial low carbon steel, Scientific Research Engineering, 2, 502–506.
- 6. Chen J.H., Cao R. (2015), Micromechanism of cleavage fracture of metals, Elsevier.
- 7. Dobrzanski L.A. (1999), Materials science lexicon, basic settlement of Polish, foreign and international standard, Metals, Polymers, Ceramics, Composites, Verlag Dshofer (in Polish).
- 8. Dymski S., Gietka T., Stawicka Z., Kaczmarek M. (2005), Testing of influence low temperaturę on cracking a welded joint, Welded Review, 4, 99–106 (in Polish).
- 9. Dzioba I., Neimitz A. (2007), Application of the standard options of the FITNET Procedure to the structural integrity assessment of welded specimens containing cracks, International Journal of Pressure Vessels and Piping, 84(8), 475–486.
- 10. Dzioba I., Skrzypczyk A. (2006), Properties and microstructure of MAG but-welded joints of 18G2A steel, Welded Review, 9–10, 32–35 (in Polish).
- 11. Dzioba I., Neimitz A., Gajewski M. (2010), Studies of fracture process in Cr-Mo-V ferritic steel with various types of microstructure, International Journal of Pressure Vessels and Piping, 87, 575–586.
- 12. ESIS P2-92. (1992), Procedure for Determining the Fracture Behaviour of Materials, Appendix 4. A4.1–A4.6.
- 13. FITNET. Fitness for service. Fracture fatigue creep corrosion (2008), In: Kocak M., Webster S., Janosch J.J., Ainsworth R.A., Koers R., editor. GKSS Research Centre, Geesthacht.
- 14. Guo W.L. (1995), Elastoplastic three dimensional crack border field – III. Fracture parameters, Engineering Fracture Mechanics, 51, 51–71.
- 15. JSME S 001-81. (1981), Standard Method of Test for Elastic-Plastic Fracture Toughness JIC. JSME Standard, Japan.
- 16. Kocanda S. (1978), Fatigue Destruction of Metals, WNT (in Polish).
- 17. McClintok F.A. (1968), Criterion for ductile fracture by growth of holes, Journal of Applied Mechanics, 35, 363-371.
- 18. Neimitz A., Galkiewicz J. (2010), Aproximation of stress-strain curve in front of a crack in a non-linear material, International Journal of Fracture, 161(1), 227–232.
- 19. Neimitz A., Graba M., Galkiewicz J. (2007), An alternative formulation of Ritchie-Knott-Rice local fracture criterion, Engineering Fracture Mechanics, 74, 1308–1322.
- 20. PN-EN 10025-2:2007: Hot Rolled Products of Structural Steels. Part 2. Technical Delivery Conditions for Non-alloy Structural Steels (in Polish).
- 21. PN-EN ISO 6892-1:2010. Metallic Materials. Tensile Testing. Part 1. Method of Test at Room Temperature (in Polish).
- 22. Rice J.R., Tacey, D.M. (1969), On the ductile enlargement of voids in triaxial stress fields, Journal of the Mechanics and Physics of Sol-ids, 17, 201–217.
- 23. Ritchie R.O., Knott J.F., Rice J.R. (1973), On the relationship between critical tensile stress and fracture toughness in mild steel, Journal of the Mechanics and Physics of Solids, 21, 395–410.
- 24. Seweryn A. (1993), Brittle fracture criterion for structures with sharp notches, Engineering Fracture Mechanics, 45, 673–681.
- 25. Seweryn A., Mroz Z. (1995), A non-local stress and strain energy release rate mixed mode fracture initiation and propagation criteria. Engineering Fracture Mechanics, 51, 955–973.
- 26. Shih C.F. (1981), Relationship between the J-integral and crack opening displacement for stationary and extending crack, Journal of the Mechanics and Physics of Solids, 29, 305–329.
- 27. Zu-Han L., Chang-Xiang M. (1985), Comparison of several methods of JIC determination, Engineering Fracture Mechanics, 22, 1117–1119.