References
- 1. Alghamdi A.A.A. (2001), Collapsible impact energy absorbers: an overview, Thin-Walled Struct, 39, 189-213.
- 2.Darvizeh A., Meshkinzar A., Alitavol M., Rajabierhard R. (2017), Low velocity impact of empty and foam filled circumferentially grooved thick-walled circular tubes, Thin-Walled Struct., 110, 97-105.
- 3. Ei-Sobky H., Singace A.A., Petsios R. . (2001), Mode of collapse and energy absorption characteristics of constrained frusta under axial impact loading. Int.J.Mech.Sci., 43, 743-757.10.1016/S0020-7403(00)00036-9
- 4. Ferdynus M., Kotełko M.,Kral J. (2018) Energy absorption capability numerical analysis of thin-walled prismatic tubes with corner dents under axial impact, accepted for publication, Maintenance and Reliability, v.20 (2), 248-255
- 5. Ferdynus M., Kotełko M., Mołdawa A. (2016), Prismatic tubular thin-walled members as energy absorbers, chapter in Statics, dynamics and stability of structures, (series of monographs) ed. by R.J. Mania, Lodz University of Technology, 4, 178-195.
- 6. Hanssen A.C., Langseth M., Hopperstad O.S. (2000), Static and dynamic crushing of circular aluminium extrusions with aluminium foam filler, International Journal of Impact Engineering, 24(5), 475–507.
- 7. Jones N. (2003), Structural Impact, Cambridge University Press.
- 8. Jones N. (2010), Energy absorbing effectiveness factor, Int. J. of Impact Engineering, 37, 754-765.
- 9. Kotełko M. (2010), Load-capacity and mechanisms of failure of thin-walled structures (in Polish), WNT, Warszawa.
- 10. Mołdawa A., Kotełko M. (2016), Impact behaviour of spot-welded thin-walled frusta, Acta Mechanica et Automatica, 10 (4), 280-284
- 11. Sarkabiri B., Jahan A., Rezvani M. (2015), Multi-objective crash-worthiness optimization of thin-walled conical groove tubes filled with polyurethane foam, 3 rd Polish Congress of Mechanics, 21 st International Conference of Computer Methods in Mechanics, 947-948.
- 12. Zhang X., Cheng G., Zhang H. (2009), Numerical investigations on a new type of energy-absorbing structure based on free inversion of tubes, Int. J. of Mechanical Sciences, 51, 64-76.
- 13. Zhe Y., You Y., Wei Y., Huang Ch. (2017), Crushing behaviour of a thin-walled circular tube with internal gradient grooves fabricated by SLM 3D printing, Thin-Walled Struct., 111, 1-8.