Have a personal or library account? Click to login
Non-Uniformity of the Combustor Exit Flow Temperature in Front of the Gas Turbine Cover

Non-Uniformity of the Combustor Exit Flow Temperature in Front of the Gas Turbine

Open Access
|Jan 2015

References

  1. 1. Błachnio J., Dięgielewski W., Kułaszka A., Zasada D. (2014), Operation- attributable factors and how they affect condition of heat-resistant coatings of gas-turbine blades, Studies and Proceedings of the Polish Association of Knowledge Management, No. 68, 17-31.
  2. 2. Błachnio J., Pawlak W. (2011), Damageability of gas turbine blades - evaluation of exhaust gas temperature in front of the turbine using a non-linear observer, Advances in Gas Turbine Technology, In Tech, 435-464.10.5772/29546
  3. 3. Bogdan M., Błachnio, J. (2010), A non-destructive method to assess condition of gas turbine blades, based on the analysis of blade-surface image, Russian Journal of Nondestructive Testing, Vol. 46, No. 11, 860-866.
  4. 4. Driankov D., Hellendoorn H., Reinfrank M. (1966), Introduction to fuzzy-logic control, WNT, Warsaw.
  5. 5. Dzida M. (2000), Identification of reasons for non-stationary and nonhomogenous behaviour of gas temperatures and pressures downstream the combustion chamber of gas turbines, Publishing House of the University of Technology in Gdańsk.
  6. 6. Marsh S. (2013), Preventig fretting fatigue in blade dovetail roots by modifying geometry of contact surfaces, Power Transmission Engineering, 28, 45-49.
  7. 7. Pawlak W., Wiklik K., Morawski J. M. (1966), Synthesis and investigation of control systems for turbojet engines with use of computer simulation methods, Scientific Library of ITWL, Warsaw.
  8. 8. Pawlak W. I. (2000), Influence of an inequality of gas thermal field at the engine turbine inlet on the speed of transient processes - the result of experiments with simulation model, Journal of KONES Internal Combustion Engines, Vol. 7, No. 1-2, 37-42.
  9. 9. Pawlak W. I . (2010), Turbojet engine - instruments for simulation, control and monitoring, Scientific Library of the Institute of Aviation, Warsaw.
  10. 10. Pawlak W. I., Balicki W. (2003), Influence of an inequality of gas thermal field at the engine turbine inlet on the speed of transient processes - the result of experiments with real engine, Journal of KONES, Vol. 10, No. 3-4, 25-28.
  11. 11. Pismenny J., Levy Y. (2002), Local Temperature Regulator In Gas Turbine Engines, International Journal of Turbo& Jet - Engines, Vol. 10, No. 1-2, 79-92.
  12. 12. Spychała J., Pawlak W., Kułaszka A., Błachnio J. (2013), Assessment of technical condition demonstrated by gas turbine blades by processing of images for their surfaces, Journal of KONBIN, 1 (21), 41-50.10.2478/jok-2013-0004
  13. 13. Stewart I. (2001), Does God play dice. The new mathematics of chaos, PWN Scientific Publications, Warsaw.
  14. 14. Swadźba L., Maciejny A., Formanek B., Mendala B. (2008), Characterization of microstructure and properties of TBC systems with gradient of chemical composition and porosity, Archives of Metallurgy and Materials, 53, 945-954.
  15. 15. Wróbel Z., Koprowski R. (2004), Practice in image processing within the MATLAB software, EXIT Academic Publishing House, Warsaw.
  16. 16. Żółtowski B., Cempel C. (2004), Machinery fault diagnosis engineering, Polish Society of Engineering Diagnosis, Warsaw.
DOI: https://doi.org/10.2478/ama-2014-0038 | Journal eISSN: 2300-5319 | Journal ISSN: 1898-4088
Language: English
Page range: 209 - 213
Published on: Jan 27, 2015
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year

© 2015 Józef Błachnio, Wojciech I. Pawlak, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.