The Impact of the Support System’s Kinematic Structure on Selected Kinematic and Dynamic Quantities of an Experimental Crane

Trąbka, Arkadiusz

doi:10.2478/ama-2014-0034

Abstract

This paper presents a comparative analysis of two kinematic structures of the support system (with supports with bilateral and unilateral constraints), which were used in an experimental model of a crane. The computational model was developed by using the ADAMS software. The impact of the kinematic structure of the support system on selected kinematic and dynamic values that were recorded during the slewing motion was analysed. It was found, among other things, that an increased number of degrees of freedom of the support system leads to multiple distortions of time characteristics of kinematic and dynamic quantities.

References

1. Araya H., Kakuzena M., Kinugawab H., Arai T. (2004), Level luffing control system for crawler cranes, Automation in Construction, 13, 689-697.10.1016/j.autcon.2004.04.011
Search in Google Scholar
2. Blackburn D., Lawrence J., Danielson J., Singhose W., Kamoi T., Taura A. (2010), Radial-motion assisted command shapers for nonlinear tower crane rotational slewing, Control Engineering Practice, 18, 523-531.10.1016/j.conengprac.2010.01.014
Search in Google Scholar
3. Cha J.H., Roh M.I., Lee K.Y. (2010), Dynamic response simulation of a heavy cargo suspended by a floating crane based on multibody system dynamics, Ocean Engineering, 37 (14-15), 1273-1291.10.1016/j.oceaneng.2010.06.008
Search in Google Scholar
4. Geisler T., Sochacki W. (2011), Modelling and research into the vibrations of truck crane, Scientific Research of the Institute of Mathematics and Computer Science, 1 (10), 49-60.
Search in Google Scholar
5. Giergiel J. (1986), Damping of mechanical vibrations (in Polish), Wyd. AGH, Kraków.
Search in Google Scholar
6. Jerman B., Podrzaj P., Kramar J. (2004), An investigation of slewing-crane dynamics during slewing motion-development and verification of a mathematical model, International Journal of Mechanical Sciences, 46, 729-750.10.1016/j.ijmecsci.2004.05.006
Search in Google Scholar
7. Kilicaslan S., Balkan T., Ider S.K. (1999), Tipping loads of mobile cranes with flexible booms, Journal of Sound and Vibration, 223 (4), 645-657.10.1006/jsvi.1999.2154
Search in Google Scholar
8. Kłosiński J. (2005), Swing-free stop control of the slewing motion of a mobile crane, Control Engineering Practice, 13, 451-460.10.1016/j.conengprac.2004.04.007
Search in Google Scholar
9. Kłosiński J., Trąbka A. (2010), Frequency analysis of vibratory device model (in Polish), Pneumatyka, 1, 46-49.
Search in Google Scholar
10. Maczyński A. (2000), The influence of crane support flexibility on load motion, 4th EUROMECH Solid Mechanics Conference, Book of abstracts II, General sessions, Metz, France, June 26-30, 519.
Search in Google Scholar
11. Mijailović R. (2011), Modelling the dynamic behaviour of the truckcrane, Transport, 26 (4), 410-417.10.3846/16484142.2011.642946
Search in Google Scholar
12. Paszkiewicz T., Osiński M., Wojciech S. (1999), Dynamic analysis of an offshore crane on offshore installations, 4th International Offshore Cranes Conference, Stavanger, Norway, April 26-28, 2-38.
Search in Google Scholar
13. Smoczek J. (2014), Fuzzy crane control with sensorless payload deflection feedback for vibration reduction, Mechanical Systems and Signal Processing, 46, 70-81.10.1016/j.ymssp.2013.12.012
Search in Google Scholar
14. Smoczek J., Szpytko J. (2012), Fuzzy rules-based approach to estimate the availability of transportation system, International Journal of Intelligent Systems Technologies and Applications, 11 (1/2), 117-137.10.1504/IJISTA.2012.046549
Search in Google Scholar
15. Smoczek J., Szpytko J. (2014), Evolutionary algorithm-based design of a fuzzy TBF predictive model and TSK fuzzy anti-sway crane control system, Engineering Applications of Artificial Intelligence, 28, 190-200.10.1016/j.engappai.2013.07.013
Search in Google Scholar
16. Sochacki W. (2007), The dynamic stability of a laboratory model of a truck crane, Thin-Walled Structures, 45, 927-930.10.1016/j.tws.2007.08.023
Search in Google Scholar
17. Sosna E. (1984), Influence of flexibility of support system on dynamics of the telescopic mobile crane (in Polish), Praca doktorska, Politechnika Łódzka.
Search in Google Scholar
18. Terashima K., Shen Y., Yano K. (2007), Modeling and optimal control of a rotary crane using the straight transfer transformation method, Control Engineering Practice, 15, 1179-1192.10.1016/j.conengprac.2007.02.008
Search in Google Scholar
19. Trąbka A. (2014), Dynamics of telescopic cranes with flexible structural components, International Journal of Mechanical Sciences, 88, 162-174.10.1016/j.ijmecsci.2014.07.009
Search in Google Scholar
20. Trombski M. (Editor) (2003), Control algorithms of telescopic crane operating cycle (in Polish), Wyd. ATH w Bielsku-Białej.
Search in Google Scholar
21. Uchiyama N. (2009), Robust control of rotary crane by partial-state feedback with integrator, Mechatronics, 19, 1294-1302.10.1016/j.mechatronics.2009.08.007
Search in Google Scholar
22. Uchiyama N., Ouyang H., Sano S. (2013), Simple rotary crane dynamics modeling and open-loop control for residual load sway suppression by only horizontal boom motion, Mechatronics, 23, 1223-1236.10.1016/j.mechatronics.2013.09.001
Search in Google Scholar
23. Wu J.J. (2006), Finite element analysis and vibration testing of a three-dimensional crane structure, Measurement, 39, 740-749.10.1016/j.measurement.2006.03.002
Search in Google Scholar

The Impact of the Support System’s Kinematic Structure on Selected Kinematic and Dynamic Quantities of an Experimental Crane

Abstract

Paradigm

My account