References
- 1. Basu A., Dutta Majumdar J., Alphonsa J., Mukherjee S., Manna I. (2008), Corrosion resistance improvement of high carbon low alloy steel by plasma nitriding, Materials Letters, Vol. 62, No. 17-18, 3117-3120.
- 2. Łępicka M., Grądzka-Dahlke M. (2013), Effect of Heat Treatment and Plasma Nitriding on Corrosion Resistance of X90CrMoV18 Martensitic Stainless Steel, Acta Mechanica et Automatica, Vol. 7, No. 3, 155-159.
- 3. Li C. X., Bell T. (2006), Corrosion properties of plasma nitrided AISI 410 martensitic stainless steel in 3.5% NaCl and 1% HCl aqueous solutions, Corrosion Science, Vol. 48, No. 8, 2035-2049.
- 4. Mashreghi A. R., Soleimani S. M., Saberifar S. (2013), The investigation of wear and corrosion behavior of plasma nitrided DIN 1.2210 cold work tool steel, Materials and Design, Vol. 46, 532-538.
- 5. PN-EN 10088-1:2005, Stainless steels, List of stainless steels.
- 6. PN-EN ISO 7153-1:2002, Surgical instruments, Metallic materials. Stainless steel.
- 7. PN-EN ISO 8044:2002, Corrosion of metals and alloys - Basic terms and definitions.
- 8. Podgornik B., Vizintin J., Leskovsek V. (1998), Tribological properties of plasma and pulse plasma nitrided AISI 4140 steel, Surface and Coatings Technology, Vol. 108-109, 454-460.
- 9. Sirin S. Y., Kaluc, E. (2012), Structural surface characterization of ion nitrided AISI 4340 steel, Materials and Design, Vol. 36, 741-747.
- 10. Soltani Asadi Z., Mahboubi F. (2012), Effect of component’s geometry on the plasma nitriding behavior of AISI 4340 steel, Materials and Design, Vol. 34, 516-521.
- 11. Tuckart W., Forlerer E., Iurman L. (2007), Delayed cracking in plasma nitriding of AISI 420 stainless steel, Surface & Coatings Technology, Vol. 202, No. 1, 199-202.
- 12. Wu K., Liu G. Q., Wang L., Xu B. F. (2010), Research on new rapid and deep plasma nitriding techniques of AISI 420 martensitic stainless steel, Vacuum, Vol. 84, No.6, 870-875.
- 13. Xi Y., Liu D., Han D. (2008a), Improvement of corrosion and wear resistances of AISI 420 martensitic stainless steel using plasma nitriding at low temperature, Surface & Coatings Technology, Vol. 202, No. 12, 2577-2583.
- 14. Xi Y., Liu D., Han D. (2008b), Improvement of erosion and erosion- corrosion resistance of AISI420 stainless steel by low temperature plasma nitriding, Applied Surface Science, Vol. 254, No. 18, 5953-5958.
- 15. Zhao Y., Yu B., Dong L., Du H., Xiao J. (2012), Low-pressure arc plasma-assisted nitriding of AISI 304 stainless steel, Surface and Coatings Technology, Vol. 210, 90-96.