References
- 1. Automatic Transmission Service Group: Introduction: Chrysler A -604, Florida 1994 - 2005.
- 2. Bemporad A., Borodani P., Mannelli M. (2003), Hybrid control of an automotive robotized gearbox for reduction of consumptions and emissions, 6th International Workshop on Hybrid Systems - Computation and Control (HSCC 2003), Prague, Czech Republic, Apr 03 - 05, Edited by: Maler O., Pnueli A., Hybrid systems: Computation and control proceedings, Vol. 2623, 81 - 96.
- 3. Bosch Folders (2005), Elektronic steering of EGS gearbox, WKL, Warsaw
- 4. Bozca M. (2010), Torsional vibration model based optimization of gearbox geometric design parameters to reduce rattle noise in an automotive transmission, Mechanism and Machine Theory, Vol. 45, 1583-1598.
- 5. Haj - Fraj A., Pfeiffer F. (2001), Optimal control of gear shift operations in automatic transmissions, Journal of the Franklin Institute, Vol. 338, 371-390.
- 6. Advanced Digital Technology Co. Ltd. (2014), http://adigitec.com/data/ADT%20Brochure%20130215%20Light%20version.pdf.
- 7. FEV GmbH(2014), http://www.fev.com/fileadmin/fev-resources/TecInfo/Test_System/173_TecInfo_FEV_Transmission_Test _Bench.pdf.
- 8. Klotz GmbH (2014), http://www.klotz.de/en/measurement_testing/automatic_transmissions.html.
- 9. Mustang Advanced Engineering (2014), http://www.mustangdyne.com/mustangae/wp - content/uploads/downloads/2011/03/MAE - transmission2012.pdf.
- 10. International Corporate Headquarters, Power Test, Inc. (2014), http://www.pwrtst.com/transmission/test-stand.htm#.
- 11. SuperFlow Dynamometers & Flowbenches(2014), http://www.superflow.com/Dynamometers/transmission/edect.php.
- 12. Kulkarni M., Shim T., Zhang Y. (2007), Shift dynamics and control of dual - clutch transmissions, Mechanism and Machine Theory, Vol. 42, 168-182
- 13. Merkisz J., Mazurek S. (2006), OBDII EOBD On - board diagnostics, WKL, Warszawa.
- 14. Ognjanovic M., Milutinovic M. (2013), Design for Reliability Based Methodology for Automotive Gearbox Load Capacity Identification, Strojniški vestnik - Journal of Mechanical Engineering, Vol. 59/5, 311 - 322.
- 15. Remond D., Soleilhac P., Play D., Coppens P., Villars F. (1998), Transmission error measurements on automotive gearbox, Mechanique Inustielle et ma Materiaux, Vol. 51/2, 61 - 63.
- 16. Rumble A. W. (2000), Techniques for enhancing correlation between objective tonal noise measurements from automotive transmissions on test stands and subjective assessments in - vehicle, IMECHE - Vehicle Noise and Vibration, Vol. 2000/1, 127 - 137.
- 17. Ślaski G. (2010), Savings the fuels due to modern solutions in automatic gearboxes, InterdisciplinaryScientific Conference Ecological and Energetic Threats and New Challenges materials, PWSZ, Gniezno, 64 - 74.
- 18. Ślaski G. (2012), The purposefulness of application and control issues of friction brake within test bench simulation reproducing the drivetrain dynamics, The Archives of Automotive Engineering, 4/58, 57 - 66
- 19. Ślaski G., Walkowiak J. (2011), Test bench simulation reproducing the drivetrain dynamics of a car with automatic transmission - control and results of experimental tests, The Archives of Automotive Engineering, 3/53, 61 - 80.
- 20. Sobieraj W. (2005), Automatic gearboxes, Instalator Polski, 4.
- 21. Walker P. D., Zhang N., Tamba R. (2011), Control of gear shifts in dual clutch transmission powertrains, Mechanical Systems and Signal Processing, Vol. 25, 1923-1936
- 22. Wen - Miin H., Yu - Lien H. (2011), Connecting clutch elements to planetary gear trains for automotive automatic transmissions via coded sketches, Mechanism and Machine Theory, Vol 46, 44-52.
Language: English
Page range: 151 - 155
Published on: Dec 20, 2014
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2014 Jaroslaw Czaban, Dariusz Szpica, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.