References
- 1. Biskupski A., Picher W. (2008), Granulation method used in domestic fertilizer factories and properties of the obtained products, Chemist, 9, 398-408.
- 2. Błasiński H, Gluba T. (1981), Methods and apparatus for measuring the strength of the agglomerates, Chemical Engineering and Equipment, 4, 29-33.
- 3. Borowik M., Malinowski P., Biskupski A., Dawidowicz M., Schab S., Rusek P., Igras J., Kęsik K. (2012), Technology of fertilizer nitrogen- sulfur-calcium based on phosphogypsum and urea, Chemist, 66, 5, 535-540.
- 4. Gluba T., Obraniak A. (2009a), Evaluation of resistance to abrasion of the granular compound fertilizers Lubofoska, Chemical Engineering and Equipment, 4, 48-49.
- 5. Gluba T., Obraniak A. (2009b), Evaluation of the wet granulation harrow product, Chemical Engineering and Equipment, 4, 50-51.
- 6. Gluba T., Obraniak A. (2009c), The kinetics of agglomeration of particulate material in the granulator harrow, Chemical Engineering and Equipment, 4, 46-47.
- 7. Gluba T., Obraniak A., Gawot-Młynarczyk E., Błaszczyk M. (2005), Influence of the wetting parameters on the compressive strength of the granules, VII National Granulation Symposium 2005, Puławy-Kazimierz Dolny.
- 8. Heim A., Gluba T., Kochański B. (1991), Evaluation of mechanical properties of products from tumbling granulation, IV National Granulation Symposium, Puławy.
- 9. Hejft R., Leszczuk T. (2012), Effect of the scraping elements in the granulator harrow for the process, Chemist, 66, 5, 370-375.
- 10. Iveson S. M., Litster J. D. (1998a), Liquid - bound granule impact deformation and coefficient of restitution, Powder Technology, 99, 234-242.
- 11. Iveson S. M., Litster J. D. (1998b), Fundamental studies of granule consolidation - part 2. Quantifying the effect of particle and binder properties, Powder Technology, 99, 243-250.
- 12. Iveson S. M., Litster J. D. (1998c), Growth regime map for liquid - bound granules, A. I. Ch. E. J., 44, 1510-1518.
- 13. Khan M. I., Targos G. I. (1997), Stability of wet agglomerates in granular shear flows, J. Fluid Mechanics, 347, 347-348.
- 14. Polański Z. (1984), Designing experiments in the technique, PWN, Warsaw.
- 15. Reynolds G. K., Fu J. S., Cheong Y. S., Hounslow M. J., Salman A. D. (2005), Breakage in granulation: A review, Chemical Enginering Science, 60, 3969-3992.
- 16. Salman A. D., Reynolds G. K., Fu J. S., Cheong Y. S., Biggs Y., Adams C., Gorham M., Lukenics D., Hounslow J. (2004), Descriptive classification of the impact failure modes of spherical particles, Powder Technology, 143-144, 19-30.
- 17. Urbańczyk L., Wantuch W., Kotowicz J., Kowalski Z., Biskupski A., Malinowski P. (2008), Specification of the compound fertilizer granulation using defective materials, Chemist, 9, 393-397.
- 18. Walker G. M., Moursy H. E. M. N., Holland C. R., Ahmad M. N. (2003), Effect of process parameters on the crush strength of granular fertilizer, Powder Technology, 132, 81-84.
- 19. Zawiślak K., Sobczak P., Panasiewicz M., Markowska A. (2010), Effect of selected technological parameters on the granules kinetic strength, Acta Sci. Pol., Agraria Technica, 9 (1-2), 3-10.