References
- 1. Bryant M.D., Miller G.R., Keer L.M. (1984), Line Contact Between a Rigid Indenter and a Damaged Elastic Body, Q. J. Mechanics Appl. Mathematics, Vol. 37, 467-478.
- 2. Dag S., Erdogan F. (2002), A Surface Crack in a Graded Medium Loaded by a Sliding Rigid Stamp, Engng Fract. Mech., Vol. 69, 17291751.
- 3. Datsyshyn O.P., Panasyuk V.V., Pryshlak R.E., Terlets’kyi A.B. (2001), Paths of edge cracks in rolling bodies under the Conditions of Boundary Lubrication, Materials Science, Vol. 37: 363-373.
- 4. Fujimoto K., Ito H., Yamamoto T. (1992), Effect of Cracks on the Contact Pressure Distribution, Tribology Transactions, Vol. 37, 683695.
- 5. Galin L.A. (1980), Contact Problems of the Theory of Elasticity and Viscoelasticity, Nauka, Moscow, (in Russian).
- 6. Goshima T. (2003), Thermomechanical Effects on Crack Propagation in Rolling Contact Fatigue Failure, Journal of Thermal Stresses, Vol. 26, 615-639.
- 7. Goshima T., Hanson M.T., Keer L.M. (1990), Three-Dimensional Analysis of Thermal Effects on Surface Crack Propagation in Rolling Contact, Journal of Thermal Stresses, Vol. 13, 237-261.
- 8. Goshima T., Kamishima Y. (1994), Mutual Interference of Multiple Surface Cracks Due to Rolling-Sliding Contact with Frictional Heating, JSME International Journal Series A, Vol. 37: 216-223.
- 9. Goshima T., Kamishima Y. (1996), Mutual interference of Two Surface Cracks in Semi-Infinite Body Due to rolling contact with Fric-tional Heating by a Rigid Roller, JSME International Journal Series A, Vol. 39, 26-33.
- 10. Goshima T., Keer L.M. (1990), Thermoelastic Contact Between a Rolling Rigid Indenter and a Damaged Elastic Body, Journal of Tribology, Transactions of the ASME, Vol. 112, 382-391.
- 11. Goshima T., Soda T. (1997), Stress Intensity Factors of a Subsurface Crack in a Semi-Infinite Body Due to Rolling/Sliding Contact and Heat Generation, JSME International Journal Series A 40, 263-270.10.1299/jsmea.40.263
- 12. Guler M.A., Erdogan F. (2007), Frictional Sliding Contact Problems of Rigid Parabolic and Cylindrical Stamps on Graded Coatings, International Journal of Mechanical Sciences, Vol. 49, 161-182,10.1016/j.ijmecsci.2006.08.006
- 13. Hasebe N. (1981), An Edge Crack in a Semi-Infinite Plate Welded to a Rigid Stiffener, Proc. Jap. Civ. Eng., Vol. 314, 149-157.
- 14. Hasebe N., Okumura M., Nakamura T. (1989), Frictional Punch and Crack in Plane Elasticity, ASCE, J Eng. Mech., Vol. 115, 1127-1149.
- 15. Hasebe N., Qian J. (1995), Circular inclined punch problem with Two Corners to Contact with a Half-Plane with a Surface Crack, In: Proc. 2nd Int. Conf. Computational Methods in Contact Mechanics., Computational Mechanics Publications, Southampton, Boston, 159-166.
- 16. Hasebe N., Qian J. (1997), Circular Rigid Punch with One Smooth and Another Sharp ends an a Half-Plane with Edge Crack, Journal of Applied Mechanics, Vol. 64, 73-79.
- 17. Hasebe N., Qian J. (1998), Edge Crack Due to Circular Rigid Punch in Incomplete Contact, Mechanics of Materials, Vol. 28, 271-279.
- 18. Hills D.A., Nowell D. (1994), Mechanics of Fretting Fatigue, Kluwer Academic Publishers, Dordrecht/Boston/London.10.1007/978-94-015-8281-0
- 19. Hills D.A., Nowell D., Sackfield A. (1993), Mechanics of Elastic Contact, Butterworth, Oxford.
- 20. Keer L.M., Bryant M.D. (1983), A Pitting Model for Rolling Contact Fatigue, Trans ASME, Journal of Lubrication Technology, Vol. 105, 198-205.
- 21. Keer L.M., Bryant M.D., Haritos G.K. (1982), Subsurface and Surface Cracking Due to Hertzian Contact, Trans ASME, Journal of Lubrication Technology, Vol. 104, 347-357.
- 22. Muskhelishvili N.I. (1962), Some basic problems of the Mathematical Theory of Elasticity, Nauka, Moscow, (in Russian).
- 23. Okumura M., Hasebe N., Nakamura T. (1990), Crack due to Weld Shaped Punch With Friction, ASCE, Journal of Engineering Mechanics, Vol. 116, 2173-2185.
- 24. Panasyuk V.V., Datsyshyn O.P., Marchenko H.P. (1995), Contact Problem for a Half-Plane with Cracks under Action of a Rigid Punch on its Boundary, Physicochemical Mechanics of Materials, Vol. 31, 7-16.
- 25. Panasyuk V.V., Datsyshyn O.P., Marchenko H.P. (2000), Stress State of a Half-Plane with Cracks under Rigid Punch Action, International Journal of Fracture, Vol. 101, 347-363.
- 26. Qian J., Hasebe N. (1997), Circular Rigid Punch on a Semi-Infinite Plate with an Oblique Edge Crack Subjected to Concentrated Forces on Point Dislocations, Proc. Jap. Civ. Eng., Vol. 570, 149-159.
- 27. Savruk M.P. (1981), Two-Dimensional Problems of elasticity for Bodies with Cracks, Naukova Dumka, Kiev, (in Russian)
- 28. Savruk M.P., Madenci E., Shkarayev S. (1999), Singular Integral Equations of the Second Kind with Generalized Cauchy-Type Ker-nels and Variable Coefficients, International Journal of Numerical Methods in Engineering, Vol. 45, 1457-1470.
- 29. Savruk M.P., Tomczyk A. (2010), Pressure with friction of an Absolutely Rigid Punch on an Elastic Half-Space with Cracks, Physico-chemical Mechanics of Materials, Vol. 46, No 3, 5-15.
- 30. Tomczyk A. (2011), The Effect of Crack on Contact Pressure Distribution in a Plane Problem Accounting for Friction, Acta Mechanica et Auto-matica, Vol. 5, No 1, 106-113.