SOFTWARE SUPPORT DEVELOPMENT FOR NUMERICAL SOLUTION OF ANSYS CFX

Brestovič, Tomáš; Jasminská, Natália

doi:10.2478/ama-2013-0036

Abstract

The paper deals with possibilities to apply a new developed software support for simulation programme ANSYS CFX. A direct export of heat-transfer coefficients into variables used under edge conditions as well as of physical properties of gas mixtures into material properties during simulation solution of technical tasks means a significant saving of time. The paper summarizes in detail description of the software for calculation of heat-transfer coefficient during free convection (HTC-FC) and of material properties of gas mixture (MPGM) that enable to export calculated data directly into the text files which can be imported then into the programme ANSYS CFX.

References

1. Badida, M., Lumnitzer, E., Biľová, M., Fiľo, M. (2008), The uncertainties of environments parameters measurements as tools of the measurements quality improvement, Univerzitet u Kragujevcu.
Search in Google Scholar
2. Durdán M., Laciak, M., Kačur, J. (2009), Mathematical modelling of the UCG process, AGH University of Science and Technology, Krakow, 407- 410.
Search in Google Scholar
3. Ferstl, K., Masaryk, M. (2010), Heat transfer book, STU Bratislava, 53- 63.
Search in Google Scholar
4. Heinrich, J. (1980), Vlastnosti tekutín, Alfa.
Search in Google Scholar
5. Jossi, J. A., Stiel, L. I., Thodos, G. (1962), The viscosity of pure substances in the dense gaseous and liquid phases, AIChEJ, 8,59.10.1002/aic.690080116
Search in Google Scholar
6. Kalaš, J., Lucskay, J., Vranayová, Z. (2000), Air infiltrationnonsteady processes in dwelling rooms of apartments experimental research,Zeszyty naukowe Politechniki Rzeszowskiej, 32, Rzeszów, 157-163.
Search in Google Scholar
7. Kapjor, A., Jandačka, J., Malcho, M., Papučík, Š. (2010), Intensification of Heat Transport from the Floor Convector at Given Geometry and the Way of Use, XXIX medzinárodná konferencia Setkání kateder mechaniky tekutin a termomechaniky, 101- 104.
Search in Google Scholar
8. Kizek, J., Lazič, L. (1999), Simulation method for optimization of a mixture of fuel gases, Metalurgija, Vol. 38, No. 2, 109-113.
Search in Google Scholar
9. Knapp, H. et al. (1982), Vapor-Liquid Equilibria for Mixtures of Low Boiling Substances, Chem. Data Ser., Vol. 6, DECHEMA.
Search in Google Scholar
10. Mansoori, Z., Saffar-Avval, M., Tabrizi, B. H., Ahmadi, G. (2002), Modeling of heat transfer in turbulent gas-solid flow, International Journal of Heat and Mass Transfer, Vol. 45, No. 6, 1173- 1184.
Search in Google Scholar
11. Michalec, Z., Taraba, B., Bojko, M., Kozubková, M. (2010), CFD modelling of the low-temperature oxidation of coal, Archivum Combustions, Vol. 30, No. 3, 133-144.
Search in Google Scholar
12. Oravec, M., Števo, S., Sekaj, I. (2010),Comparison of Using Simple Genetic Algorithm and Parallel Genetic Algorithm in Heat Transfer Model Optimization, Journal of Cybernetics and Informatics. Vol. 9, 13-18.
Search in Google Scholar
13. Purcz, P. (2001), Parallel algorithm for spatially one- and twodimensional initial-boundary-value problem for a parabolic eauation, Kybernetika, Vol. 37, no. 2, 171-181
Search in Google Scholar
14. Purcz, P. (2006) Communication complexity and speed-up in the explicit difference method. Parallel Processing Letters. Vol. 16, no. 3, 313-321
Search in Google Scholar
15. Pyszko, R., Příhoda, M., Velička, M. (2010), Method for determining the thermal boundary condition in the CC mould for numeric models, In Proceedings of 19 conference METAL, Ostrava.
Search in Google Scholar
16. Rajzinger, J. (2012), Calculation of maximum water content in various natural gases by using modified Peng-Robinson equation of state, Communications, Vol. 14, No. 4A, s. 29-35.
Search in Google Scholar
17. Setoodeh, N., Rahimi, R., Ameri, A. (2011), Modeling and determination of heat transfer coefficient in a basin solar still using CFD, Desalination, Vol. 268, No. 1-3, 103-110.
Search in Google Scholar
18. Svoboda, A. a kol. (2007), Plynárenská příručka, Gas Praha.
Search in Google Scholar
19. Tauš, P., Kudelas, D. (2012), Počítačové modelovanie prevádzkových parametrov prototypov slnečných vzduchových kolektorov na báze recyklovaných plastov, TechCON Magazín, Vol. 8, No. 3, 37-40.
Search in Google Scholar
20. Tkáč, J., Hvizdoš, M. (2008), Metán hydrát a jeho využitie na energetické účely, ALER Žilina: EDIS, 53-59
Search in Google Scholar
21. Trebuňa, P., Kliment, M., Halčinová, J., Fiľo, M., Markovič, J. (2013), Developments in field of data processing through PDM, PLM and the use of system Teamcenter nowadays, Sborník příspěvků: 3, Valtice. - Plzeň, SmartMotion, 2013, 190-194.
Search in Google Scholar
22. Ullmann, F. (2005), Ullmann's Chemical Engineering and Plant Design, Vol. 1-2, John Wiley & Sons.
Search in Google Scholar
23. Vranay, F., Vranayová, Z. (1999), One-pipes systems hydraulic regulation, Systemy a technologie ogrzewania budynków, Solina, 225-230.
Search in Google Scholar

SOFTWARE SUPPORT DEVELOPMENT FOR NUMERICAL SOLUTION OF ANSYS CFX

Abstract

Paradigm

My account