References
- 1. Baszkiewicz J., Kamiński F. (2006), Materials corrosion, Publishing Office of Warsaw University of Technology, Warszawa.
- 2. Bell T., Sun Y. (2002), Low temperature plasma nitriding and carburising of austenitic stainless steels, Advanced Materials And Processes, Vol. 160, No. 6, 49-51.
- 3. Głowacka M. (1996), Metallography, Publishers of Gdansk Technical University, Gdansk.
- 4. Gösta W. (1985), Base of corrosion and metals protection, WNT, Warszawa.
- 5. Grubb J. F. (2011), Martensitic stainless steels in Uhlig's Corrosion Handbook (by Revie R. W.) , John Wiley and Sons, Hoboken.
- 6. Hedström P. (2007), Deformation and Martensitic Phase Transformation in Stainless Steels, Lulea University of Technology, Lulea.
- 7. Li C. X, Bell T. (2006), Corrosion properties of plasma nitrided AISI 410 martensitic stainless steel in 3.5% NaCl and 1% HCl aqueous solutions, Corrosion Science, Vol. 48, No. 8, 2035-2049.
- 8. Marciniak J. (1992), Biomaterials in bone surgery, Publishers of Silesian University of Technology, Gliwice.
- 9. Mingolo N., Tschiptschin A. P., Pinedo C. E. (2006), On the formation of expanded austenite during plasma nitriding of an AISI 316L austenitic stainless steel, Surface and Coatings Technology, Vol. 201, No. 7, 4215-4218.
- 10. Paszenda Z., Tyrlik-Held, J. (2003), Surgical instrument, Publishers of Silesian University of Technology, Gliwice.
- 11. Pinedo C. E., Monteiro W. A. (2004), On the kinetics of plasma nitriding a martensitic stainless steel type AISI 420, Surface and Coatings Technology, Vol. 179, No. 2-3, 119-123.
- 12. Rudnik S. (2006), Metallography, PWN, Warszawa.
- 13. Samandi M., Shedden B. A., Smith D. I., Collins G. A., Hutchings R., Tendys J. (1993), Microstructure, corrosion and tribological behaviour of plasma immersion ion-implanted austenitic stainless steel,Surface and Coatings Technology, Vol. 59, No. 1-3, 261-266.
- 14. Tuckart W., Forlerer E., Iurman L. (2007), Delayed cracking in plasma nitriding of AISI 420 stainless steel, Surface & Coatings Technology, Vol. 202, No. 1, 199-202.
- 15. Wu K., Liu G. Q., Wang L., Xu B. F.(2010) Research on new rapid and deep plasma nitriding techniques of AISI 420 martensitic stainless steel, Vacuum, Vol. 84, No.6, 870-875.
- 16. Xi Y., Liu D., Han D. (2008a), Improvement of corrosion and wear resistances of AISI 420 martensitic stainless steel using plasma nitriding at low temperature, Surface & Coatings Technology, Vol. 202, No. 12, 2577-2583.
- 17. Xi Y., Liu D., Han D. (2008b) Improvement of erosion and erosion- corrosion resistance of AISI420 stainless steel by low temperature plasma nitriding, Applied Surface Science, Vol. 254, No. 18, 5953-5958.
- 18. Yang S., Wang Z. J., Kokawa H., Yutaka S. S. (2007). Grain boundary engineering of 304 austenitic stainless steel by laser surface melting and annealing, Journal of Materials Science, Vol. 42, No. 3, 847-853.
- 19. PN-EN ISO 7153-1:2002 Surgical instruments. Metallic materials. Stainless steel.
- 20. PN-EN ISO 8044:2002 Corrosion of metals and alloys - Basic terms and definitions.
- 21. PN-EN 10088-1:2005 Stainless steels. List of stainless steels.