References
- 1. Bolelli G. (2009), HVOF-sprayedWC-CoCr coatings on Al alloy: Effect of the coating thickness on the tribological properties, Wear, Vol. 267, 944-953.
- 2. Bolelli G. et al. (2007), Microstructural and tribological comparison of HVOF-sprayed and post-treated M-Mo-Cr-Si (M=Co, Ni) alloy coatings, Wear, Vol. 263, 1397-1416.
- 3. Bolelli G., Lusvarghi L., Barletta M. (2009), HVOF-sprayedWC- CoCr coatings on Al alloy: Effect of the coating thickness on the tribological properties, Wear, Vol. 267, 944-953.
- 4. Fang W. (2009), Processing optimization, surface properties and wear behavior of HVOF spraying WC-CrC-Ni coating, Journal of Materials Processing Technology, Vol. 209, 3561-3567.
- 5. González-Hermosilla W. A. et al. (2010), Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC-10Co-4Cr cermet, deposited by HVOF thermal spray, Materials Science and Engineering A, Vol. 527, 6551-6561.
- 6. Hadad M. et al. (2008), Adhesion evaluation of multilayered based WC-Co-Cr thermally sprayed coatings, Surface and Coatings Technology, Vol. 202, 4399-4405.
- 7. Lee C.W., Han J.H., Yoon J., Shin M.C., Kwun S.I. (2010), A study on powder mixing for high fracture toughness and wear resistance of WC-Co-Cr coatings sprayed by HVOF, Surface and Coatings Technology, Vol. 204, 2223-2229.
- 8. Lee C.W., Han J.H., Yoon J., Shin M.C., Kwun S.I. (2010), A study on powder mixing for high fracture toughness and wear resistance of WC-Co-Cr coatings sprayed by HVOF, Surface and Coatings Technology, Vol. 204, 2223-2229.
- 9. Maiti A.K., Mukhopadhyay N., Raman R. (2007), Effect of adding WC powder to the feedstock of WC-Co-Cr based HVOF coating and its impact on erosion and abrasion resistance, Surface and Coatings Technology, Vol. 201, 7781-7788.
- 10. Ramesh M.R. et al. (2010), Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings, Wear, Vol. 269 197-205.
- 11. Sahraoui T., Guessasma S., Fenineche N. E., Montavon G., Coddet C. (2004), Friction and wear behaviour prediction of HVOF coatings and electroplated hard chromium using neural computation, Materials Letters, Vol. 58, 654-660.
- 12. Sidhu H. S., Sidhu B. S., Prakash S. (2006), Mechanical and microstructural properties of HVOF sprayed WC-Co and Cr3C2-NiCr coatings on the boiler tube steels using LPG as the fuel gas, Journal of Materials Processing Technology, Vol. 171, 77-82.
- 13. Tan J.C., Looney L., Hashmi M.S.J. (1999), Component repair using HVOF thermal spraying, Journal of Materials Processing Technology, Vol. 92-93, 203-208.
- 14. Thakur L., Arora N., Jayaganthan R., Sood R. (2011), An investigation on erosion behavior of HVOF sprayed WC-CoCr coatings, Applied Surface Science, Vol. 258 1225-1234.
- 15. Venkateswarlu K. et al. (2009), Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques, Wear, Vol. 266, 996-1002.