THIN-WALLED EPOXY-GLASS FIBRE BEAMS SUBJECTED TO PURE BENDING

Kubiak, Tomasz; Kołakowski, Zbigniew

doi:10.2478/ama-2013-0015

Abstract

Buckling and postbuckling behaviour of thin-walled channel section beam made of epoxy-glass composite have been considered. The beams under analysis was subjected to pure bending. The main aim was check the influence of ply arrangement on buckling load and postbuckling behaviour and validate the authors analytical-numerical method by commercial finite element method software. Mentioned analytical-numerical method has been developed for more than 25 years in Department of Strength of Materials. This method uses asymptotic Koiter theory for conservative systems in the second order approximation modified by Byskov and Hutchinson. Additionally, using the finite element method software the influence of ply arrangement on failure load were checked.

References

1. Ambartsumyan S.A. (1970), Theory of anisotropic plates, Technomic.
Search in Google Scholar
2. Ashton J.E., Whitney J.M. (1970), Theory of Laminated plates, Technomic.
Search in Google Scholar
3. Bernoulli J., Euler L. (1910), Abhandlungen uber das Gleichegewicht und die Schwingungen der Ebenen Elastischen Kurven, Wilhelm Engelmann, 175, Leipzig.
Search in Google Scholar
4. Brunelle E.J., Oyibo G.A. (1983), Generic buckling curves for specially orthotropic rectangular plates, AIAA 21, 8, 1150-115.10.2514/3.8219
Search in Google Scholar
5. Byskov E., Hutchinson J. W. (1977), Mode interaction in axially stiffened cylindrical shells, AIAA 15(7), 941-94810.2514/3.7388
Search in Google Scholar
6. Chailleux A., Hans Y., Verchery G. (1975), Experimental study of the buckling of laminated composite columns and plates, Int. J. Mechanical Science 17, 489-498.10.1016/0020-7403(75)90013-2
Search in Google Scholar
7. Chandra R., Raju B. (1973), Postbuckling analysis for rectangular orthotropic plates, Int. J of Mechanical Science 16, 81-97.10.1016/0020-7403(73)90047-7
Search in Google Scholar
8. Dębski H., Kubiak T., Teter A. (2013), Buckling and postbuckling behaviour of thin-walled composite channel section column, Composite Structures 100, 195-20410.1016/j.compstruct.2012.12.033
Search in Google Scholar
9. Fraser Jr., H.R., Miller R.E. (1970), Bifurcation type of buckling of generally orthotropic clamped plates, AIAA 8, 4, 707-712.10.2514/3.5745
Search in Google Scholar
10. Gupta R.K., Rao K.P. (1985), Instability of laminated composite thinwalled open-section beams, Composite Materials 4, 299-313.10.1016/0263-8223(85)90030-3
Search in Google Scholar
11. Koiter W.T. (1976), General theory of mode interaction in stiffened plate and shell structures, WTHD, Report 590, Delf.
Search in Google Scholar
12. Kołakowski Z., Kowal-Michalska K. (eds), (1999), Selected problems of instabilities in composite structures A series of monographes, Technical University of Lodz Press.
Search in Google Scholar
13. Kolakowski Z., Kubiak T. (2005), Load-carrying capacity of thinwalled composite structures, Composite Structures 67, 417-426.10.1016/j.compstruct.2004.01.019
Search in Google Scholar
14. Kolakowski Z., Kowal-Michalska K. (eds), (2012), Static, dynamic and stability of structures, Vol. 2, Statics, dynamics and stability of structural elements and systems, A series of monographs, Technical University of Lodz Press, Lodz.
Search in Google Scholar
15. Kolakowski Z., Mania R.J. (2013), Semi analytical method versus the FEM for analysis of the local post-buckling of thin-walled composite structure, Composite Structures 97, 99-106.10.1016/j.compstruct.2012.10.035
Search in Google Scholar
16. Kubiak T. (2001), Postbuckling behavior of thin-walled girders with orthotropy varying widthwise, Int. J. Solid and Structures 38, 28-29, 4839-4856.10.1016/S0020-7683(00)00340-1
Search in Google Scholar
17. Lekhnitskii S. (1947), Anisotropnyje plastinki, Moscow-Leningrad.
Search in Google Scholar
18. Libove C., (1983), Buckle pattern of biaxially compressed simply supported orthotropic plates, Jnt. of Comp. Materials 17, 45-48.
Search in Google Scholar
19. Mandell J.M. (1968), An experimental study of the postbuckling of anisotropic plates, M.S. thesis, Case Western Reserve University.
Search in Google Scholar
20. March H. (1942), Buckling of flat plywood plates in compression, shear or combined compression and shear, Forest Products Laboratory, Rep. 1316.
Search in Google Scholar
21. Massey C. (1971), The elastic buckling of orthotropic rectangular plates, Civ. Eng. Trans. CE13, 1, 63-65.
Search in Google Scholar
22. Noor A.K. (1975), Stability of multilayered composite plates, Fibre Science and Technology 8, 81-89.10.1016/0015-0568(75)90005-6
Search in Google Scholar
23. Prahakara M.K. Chia C.Y. (1973), Postbuckling behaviour of rectangular orthotropic plates, Jnl. Mech. Eng. Sci. 17, 25-33.
Search in Google Scholar
24. Reissner. E., Stavsky. Y. (1961), Bending and stretching of certain types of heterogeneous aelotropic elastic plates, Trans ASME Jnl. of Appl. Mech. 9, 402-408.
Search in Google Scholar
25. Seydel E. (1933), The critical shear load of rectangular plate, NACA TM 705.
Search in Google Scholar
26. Smith R.C.T. (1944), The buckling of flat plywood plate in compression, Australian Council for Aeonautics Rep. 12.
Search in Google Scholar
27. Thielemann W. (1950), Contributions to the problem of buckling of orthotropic plates with special reference to plywood, NACA TM 1263.
Search in Google Scholar
28. Timoshenko S.P., Gere J.M. (1961), Theory of elastic stability, McGraw-Hill.
Search in Google Scholar
29. Ting T.K. Surdenans J. (1987), Buckling of rectangular orthotropic plates under biaxial loading, Jnl of Comp. Materials, 21, 124-128.
Search in Google Scholar
30. Vinson J.R. Chou T.W. (1975), Composite Materials and their use in structures, Applied Science Publisher Ltd.
Search in Google Scholar
31. Volmir S.A. (1967), Stability of Deformation Systems, Science, Moscow /in Russian/.
Search in Google Scholar

THIN-WALLED EPOXY-GLASS FIBRE BEAMS SUBJECTED TO PURE BENDING

Abstract

Paradigm

My account