References
- 1. Agrawal G.L. (1997), Foil air/gas bearing technology - an overview, International Gas Turbine & Aero Engine Congress & Exhibition, Orlando (USA).10.1115/97-GT-347
- 2. DellaCorte C. (1997), A new foil air bearing test rig for use to 700 °Cand 70,000 rpm, NASA TM-107405.10.1080/10402009808983756
- 3. Howard S.A., San Andres L. (2010), A new analysis tool assessment for rotordynamic modeling of gas foil bearings, ASMETurbo Expo 2010: Power for Land, Sea and Air GT2010, Glasgow, UK, (GT2010-22508).10.1115/GT2010-22508
- 4. Kicinski J., Zywica G. (2010), The numerical analysis of the steam microturbine rotor supported on foil bearing, Advances in VibrationEngineering, Vol. 11, No. 2, 113-119.
- 5. Kicinski J., Zywica G., Rzadkowski R., Drewczynski M. (2008), Numerical modeling of the structural layer of foil bearing, ActaMechanica et Automatica, Vol. 2, No. 1, 45-50.
- 6. Kim D., Park S. (2009), Hydrostatic air foil bearings: analytical and experimental investigation, Tribology International, Vol. 42, 413-425.
- 7. Kim T.H., Breedlove A.W., San Andres L. (2009), Characterization of a foil bearing structure at increasing temperatures: static load and dynamic force performance, Journal of Tribology, Vol. 131.
- 8. Kozanecki Z., Kicinski J., Zywica G. (2009), Numerical model of the high speed rotors supported on variable geometry bearings, IUTAM Symposium on Emerging Trends in Rotor Dynamics, New Delhi, INDIA.10.1007/978-94-007-0020-8_19
- 9. Lee Y.B., Kim T.H., Kim C.H., Lee N.S., Choi D.H. (2004), Unbalance response of a super-critical rotor supported by foil bearings - comparison with test results, Tribology Transactions, Vol. 47, No. 1, 54-60.
- 10. Lee Y.B., Park D.J., Kim H.T., Sim K. (2012), Development and performance measurement of oil-free turbocharger supported on gas foil bearings, Journal of Engineering for Gas Turbines and Power, Vol. 134, Issue 3, 54-60.
- 11. Rubio D., San Andres L. (2006), Bump-type foil bearing structural stiffness: experiments and predictions, ASME Journal of Engineeringfor Gas Turbines and Power, Vol. 128, 653-660.
- 12. Salehi M., Heshmat H. (2000), On the fluid flow and thermal analysis of a compliant surface foil bearing and seal, TribologyTransactions, Vol. 43, No. 2, 318 - 324.
- 13. San Andres L., Kim T.H. (2009), Analysis of gas foil bearings integrating FE top foil models, Tribology International, Vol. 42, 111-120.
- 14. Zywica G. (2011), The static performance analysis of the foil bearing structure, Acta Mechanica et Automatica, Vol. 5, No. 4, 119-122.