THE EFFECT OF TEMPERATURE PYROLYSIS PROCESS OF USED TIRES ON THE QUALITY OF OUTPUT PRODUCTS

Natália Jasminská; Tomáš Brestovič; Mária Čarnogurská

doi:10.2478/ama-2013-0004

.blurhash-client-img { display: none !important; }

THE EFFECT OF TEMPERATURE PYROLYSIS PROCESS OF USED TIRES ON THE QUALITY OF OUTPUT PRODUCTS

Acta Mechanica et Automatica

Volume 7 (2013): Issue 1 (March 2013)

By: Natália Jasminská, Tomáš Brestovič and Mária Čarnogurská

Open Access

|Jan 2014

Abstract

Pyrolysis together with gasification and combustion create a group of so called thermic processes. Unlike the combustion it is based on thermic decomposition of organic materials without any access of oxidative media. Within the pyrolytic process, three main fractions are created: solid residue, pyrolytic gas and organic liquid product - pyrolytic oil. The presented article examines the effects of pyrolysis operational conditions (above all, temperature) on gas products, solid residues and liquid fractions.

References

1. Aylón E. et al. (2007), Emissions from the combustion of gas-phase products at tyre pyrolysis, Journal of Analytical and Applied Pyrolysis, 79, 210-214.10.1016/j.jaap.2006.10.009
Search in Google Scholar
2. Berrueco C., Esperanza E., Mastral F. J. et al. (2005), Pyrolysis of waste tyres in an atmospheric static-bed batch reactor, Analysis of the gases obtained, Journal of Analytical and Applied Pyrolysis, 74, 245-253.10.1016/j.jaap.2004.10.007
Search in Google Scholar
3. Cunliffe A. M., Williams P. T. (1998), Composition of oils derived from the batch pyrolysis of tyres, Journal of Analytical and Applied Pyrolysis, 44, 131-152.10.1016/S0165-2370(97)00085-5
Search in Google Scholar
4. Haydary J. et al. (2012), Influence of particle size and kinetic parameters on tire pyrolysis, Journal of Analytical and Applied Pyrolysis, 97, 73-79.10.1016/j.jaap.2012.07.003
Search in Google Scholar
5. Kizek J., Zsigraiová Z. (1999), Experimental study of combustion parameters of low-heat gaseous fuels, Metallurgičeskaja Teplotechnika, Gosudarstvennaja Metalurgičeskaja Akademija Ukrajiny, 17-19.
Search in Google Scholar
6. Koreňová Z. et al. (2006), Kinetics of Pyrolysis and properties of Carbon Black from a Scrap Tire, Chemical Paper, 60, 422-426.10.2478/s11696-006-0077-x
Search in Google Scholar
7. Leung D. Y. C., Wang C. L. (1998), Kinetic study of scrap tyre pyrolysis and combustion, Journal of Analytical and Applied Pyrolysis, 45, 153-169.10.1016/S0165-2370(98)00065-5
Search in Google Scholar
8. Murena F., Garufi E., Smith R.B., Gioia F. (1996), Hydrogenative pyrolysis of waste tires, Journal of Hazardous Materials, 50, 79-98.10.1016/0304-3894(96)01778-5
Search in Google Scholar
9. Rodriguez I. M., et al. (2001), Pyrolysis of scrap tyres, Fuel Processing Technology, 72, 9-22.10.1016/S0378-3820(01)00174-6
Search in Google Scholar
10. Wágnerová E., Uríček D. (2003), Theoretical analysis of thermal methods of disposal of municipal waste, Acta Mechanica Slovaca, 7, 337-342.
Search in Google Scholar
11. Yang J., Tanguy P. A., Roy C. (1995), Heat transfer, mass transfer and kinetics study of the vacuum pyrolysis of a large used tire particle, Chemical Engineering Science, 50, 1909-1922. 10.1016/0009-2509(95)00062-A
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.2478/ama-2013-0004 | Journal eISSN: 2300-5319 | Journal ISSN: 1898-4088

Journal RSS Feed

Language: English

Page range: 20 - 25

Published on: Jan 22, 2014

Published by: Bialystok University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

Related subjects:

Electrical engineering,

Electronics,

Mechanical engineering,

Mechanics,

Bioengineering and biomedical engineering,

Biomechanics,

Civil engineering,

Environmental engineering

© 2014 Natália Jasminská, Tomáš Brestovič, Mária Čarnogurská, published by Bialystok University of Technology
This work is licensed under the Creative Commons License.

Volume 7 (2013): Issue 1 (March 2013)